Push-Fit Tube Fittings for 12mm & 16mm Pipe — Straight, Elbow, Tee, Ball Valve, 1/2" & 3/4" NPT

Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild

Push-Fit Tube Fittings for 12mm & 16mm Pipe — Straight, Elbow, Tee, Ball Valve, 1/2" & 3/4" NPT

Name: Push-Fit Tube Fittings for 12mm & 16mm Pipe — Straight, Elbow, Tee, Ball Valve, 1/2" & 3/4" NPT
Brand: HomeDIYer
Price: 9.71 USD
Availability: InStock

HomeDIYer

Keine Bewertungen

By HomeDIYer®

Size: 1216-Equal Straight

Quantity(PCS): 1PCS

Preis:

$9.71 USD

Lagerbestand:

Verfügbar (500 Stück), versandbereit

Menge:

Teile dieses Produkt

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

Push-Fit Tube Fittings for 12mm & 16mm Pipe — Leak-Free Connections Without Crimping

Dealing with leaky joints, mismatched thread sizes, or the hassle of crimping tools on every connection? DIYers, plumbers, and HVAC technicians working with aluminum-plastic composite (PAP) or multilayer tubing need push-fit tube fittings that go together fast, hold tight, and don't require a van full of specialty tools. These 1216 push-fit tube fittings are built for exactly that job.

Each piece is machined from brass or aluminum-plastic composite body stock and designed for 12mm (≈1/2" OD) and 16mm (≈5/8" OD) tubing. The lineup covers every connection type you'll encounter on a job: equal straight connectors, reducing straights (12mm × 16mm), elbows (equal and reducing), seat elbows, tees (equal and reducing), ball valves, clip rings, and nuts — with male and female 1/2" and 3/4" NPT thread options throughout. Quantity options range from 1 to 100 pieces per order.

These push-fit tube fittings are well-suited for radiant floor heating loops, domestic hot and cold water distribution, hydronic heating systems, and light commercial plumbing where aluminum-plastic composite pipe is the tubing of choice. Whether you're roughing in a new bathroom, extending a radiant heating zone, or replacing a corroded fitting in a tight mechanical room, this system gives you the connection types to get it done.

🔗 Compatibility: Designed for 12mm and 16mm OD aluminum-plastic composite (PAP / PEX-AL-PEX) multilayer tubing. Threaded ports are 1/2" or 3/4" NPT. Verify your tube OD and thread standard before ordering.

✅ Key Features of These Push-Fit Tube Fittings

🔧Tool-Free Push-Fit Installation — Tube inserts directly into the fitting body; no crimping tool or press ring required for the push-fit connection, saving time on radiant heating and plumbing rough-ins.
📐Complete System Coverage — Straight, elbow, seat elbow, tee, reducing, and ball valve configurations in one product family, so you can source every fitting type for a 12mm or 16mm tube system from a single listing.
🔩Male & Female NPT Thread Options — 1/2" and 3/4" NPT male and female threaded ports allow direct connection to standard US pipe fittings, valves, and manifolds without adapters.
⚙️Equal & Reducing Configurations — Equal fittings join same-diameter tubes; 1216×1620 reducing fittings transition between 12mm and 16mm lines, giving you layout flexibility in multi-zone systems.
🛡️Brass & Composite Construction — Brass-bodied variants offer corrosion resistance and durability in hot and cold water applications; aluminum-plastic composite bodies keep weight low in overhead or wall-cavity runs.
📦Flexible Quantity Packs — Order from 1 to 100 pieces per variant (clip rings and nuts available up to 100 PCS), so you can buy exactly what a single repair needs or stock up for a full installation.

📐 Technical Specifications — Push-Fit Tube Fittings

Fitting Types	Equal Straight, Reducing Straight (12×16mm), Straight with 1/2" Female NPT, Straight with 1/2" Male NPT, Straight with 3/4" Female NPT, Straight with 3/4" Male NPT, Equal Elbow, Reducing Elbow (12×16mm), Elbow with 1/2" Female NPT, Elbow with 1/2" Male NPT, Elbow with 3/4" Female NPT, Elbow with 3/4" Male NPT, Seat Elbow with 1/2" Female NPT, Equal Tee, Reducing Tee (12×16mm), Tee with 1/2" Female NPT, Tee with 1/2" Male NPT, Equal Ball Valve, Ball Valve with 1/2" Female NPT, Ball Valve with 1/2" Male NPT, Clip Rings, Nuts
Tube OD Compatibility	12mm (≈1/2") and 16mm (≈5/8"); reducing fittings connect 12mm to 16mm
Thread Standard	NPT (National Pipe Thread) — 1/2" and 3/4" sizes
Thread Types Available	Male NPT, Female NPT
Body Material	Brass or Aluminum-Plastic Composite (varies by variant — contact us to confirm)
Connection Method	Push-fit (tube insertion); clip ring and nut secured
Working Pressure	See variant options — contact us to confirm for your application
Working Temperature	See variant options — contact us to confirm for your application
Quantity Options	1, 2, 3, 5, 8, 10, 15, 20, 30, 40, 50, 80, 100 PCS (varies by fitting type)
Compatible Tubing	PAP / PEX-AL-PEX multilayer composite tubing (12mm or 16mm OD); verify wall thickness compatibility
Finish	See variant options
Country of Origin	Contact us to confirm

⚠️ Before You Order: Confirm your tube's outer diameter (OD) and wall thickness. These fittings are sized for 12mm and 16mm OD tubing. Thread sizes are NPT — verify compatibility with your existing valves and manifolds.

❓ Frequently Asked Questions

How do I choose the right fitting size for my tubing?

Match the fitting size to your tube's outer diameter (OD). These fittings are designed for 12mm (≈1/2" OD) and 16mm (≈5/8" OD) tubing. Measure your tube's OD before ordering — do not rely on nominal pipe size alone. For reducing fittings (1216×1620), one end accepts 12mm tube and the other accepts 16mm tube, making them ideal for transitioning between zones in a radiant heating system.

What thread standard do the male and female ports use?

The threaded ports are generally NPT (National Pipe Thread) in 1/2" and 3/4" sizes, which are the most common standards in US residential and commercial plumbing. Always verify thread compatibility with your existing fittings, valves, and manifolds before installation. BSP or metric threads are not interchangeable with NPT.

What materials are these fittings made from?

These fittings are typically constructed from brass or aluminum-plastic composite (PAP/PEX-AL-PEX compatible) bodies. Brass variants offer excellent corrosion resistance and are suitable for potable water and hydronic heating. Aluminum-plastic composite bodies are lighter and well-suited for wall-cavity or overhead runs. Contact us to confirm the exact material for a specific SKU before ordering.

Can these fittings be used outdoors or in high-humidity environments?

Brass variants generally offer good corrosion resistance for indoor plumbing, radiant heating, and protected outdoor applications. For fully exposed outdoor environments, direct burial, or marine applications, additional corrosion protection or alternative materials are recommended. Contact us to confirm suitability for your specific installation conditions.

What is the maximum working pressure and temperature for these fittings?

Working pressure and temperature ratings vary by fitting type and material. Brass push-fit fittings typically handle up to 150 PSI and temperatures up to 200°F (93°C) in standard plumbing and hydronic heating applications. Always verify the rated specifications for your specific variant and application — contact us to confirm before installation in high-pressure or high-temperature systems.

Are these fittings compatible with PEX, PEX-AL-PEX, or multilayer composite tubing?

These push-fit fittings are generally compatible with aluminum-plastic composite (PAP / PEX-AL-PEX) multilayer tubing of the corresponding OD (12mm or 16mm). Compatibility with standard PEX or CPVC depends on wall thickness and tube stiffness. We recommend confirming your tube's OD and wall thickness before installation to ensure a secure, leak-free connection.

Do I need special tools to install these push-fit fittings?

Push-fit fittings are designed for straightforward installation. A tube cutter is recommended for clean, square cuts — ragged cuts can compromise the seal. The clip rings and nuts in this system secure the connection mechanically. No crimping tool or press ring tool is required for the push-fit variants, making them a practical choice for DIY plumbing and radiant heating projects.

How do I select between equal and reducing fittings?

Choose equal fittings (e.g., 1216-Equal Straight, 1216-Equal Elbow, 1216-Equal Tee) when both tubes being joined are the same diameter — either both 12mm or both 16mm. Choose reducing fittings (e.g., 1216×1620-Reducing Straight, Reducing Elbow, Reducing Tee) when you need to connect a 12mm tube to a 16mm tube, such as when transitioning from a main distribution line to a branch circuit in a radiant heating or plumbing system.

🛒 Select your fitting type and quantity above, then add to cart — ships from our US warehouse.

Push-Fit Tube Fittings for 12mm & 16mm Pipe — Straight, Elbow, Tee, Ball Valve, 1/2" & 3/4" NPT

Payment & Security

Let customers speak for us

DIY Expert Support

Beschreibung

Push-Fit Tube Fittings for 12mm & 16mm Pipe — Leak-Free Connections Without Crimping

✅ Key Features of These Push-Fit Tube Fittings

📐 Technical Specifications — Push-Fit Tube Fittings

❓ Frequently Asked Questions

Push-Fit Tube Fittings for 12mm & 16mm Pipe — Straight, Elbow, Tee, Ball Valve, 1/2" & 3/4" NPT

You may also like

Recently viewed