{"product_id":"304-stainless-steel-shim-foil-sheet-strip-metal-band","title":"304 Stainless Steel Shim Sheet Foil Strip — 0.05 to 0.5mm Thick, 300×1000mm Metal Band Roll","description":"\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I choose the right thickness for my application?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Thickness selection depends on the gap you need to fill or the flexibility required. For precision shimming and gaskets, thinner foils (0.05–0.1mm) are generally used. For structural spacers or wear strips, 0.3–0.5mm is typically more appropriate. When in doubt, measure the gap with a feeler gauge first.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the tensile strength of 304 stainless steel shim sheet?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"304 stainless steel typically has a tensile strength of around 515 MPa (75,000 psi) and a yield strength of approximately 205 MPa (30,000 psi). Thin foil gauges may vary slightly due to cold-rolling processes.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can this stainless steel foil sheet be used outdoors?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. 304 stainless steel offers good corrosion resistance in most outdoor environments. It performs well in rain, humidity, and mild industrial exposure. For highly saline or chloride-rich environments (e.g., coastal or marine), 316 stainless steel is generally recommended instead.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What thread or fastener standards is this compatible with?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"This is a flat sheet\/foil product, not a threaded fastener. It is compatible with any application requiring a flat metal shim, spacer, or gasket material. It can be cut to fit around bolts or fasteners of any standard (metric or imperial).\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I cut or bend this stainless steel foil sheet?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Thinner gauges (0.05–0.2mm) can typically be cut with sharp scissors or a utility knife and bent by hand. Thicker gauges (0.3–0.5mm) generally require metal shears or a score-and-snap method. Always wear gloves — cut edges can be sharp.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is this the same as 18\/8 stainless steel?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. 304 stainless steel is commonly referred to as 18\/8 stainless, indicating approximately 18% chromium and 8% nickel content. It is one of the most widely used austenitic stainless steel grades for general-purpose applications.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the difference between 0.05mm and 0.5mm thickness in practical use?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"0.05mm (≈0.002\\\" or 2 thou) is an ultra-thin foil, flexible and ideal for fine shimming, sealing, or wrapping. 0.5mm (≈0.020\\\" or 20 thou) is a stiffer strip suitable for structural spacers, wear plates, or heavier-duty gaskets. Choose based on the rigidity and gap tolerance your project requires.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n\n\u003cdiv class=\"hdiy-desc\"\u003e\n\n  \u003cdiv class=\"hdiy-overview\"\u003e\n    \u003ch2\u003e304 Stainless Steel Shim Foil Sheet — Precision Thin Metal Strip for Shimming, Gaskets \u0026amp; Fabrication\u003c\/h2\u003e\n    \u003cp\u003eWhether you're leveling machinery, fabricating custom gaskets, or need a reliable spacer material for a tight-tolerance assembly, finding a flat metal strip in the exact thickness you need — without ordering a full industrial coil — is a real challenge. This 304 stainless steel shim foil sheet is stocked in seven precise thicknesses and ships ready to cut, making it a practical solution for engineers, machinists, hobbyists, and DIY fabricators alike.\u003c\/p\u003e\n    \u003cp\u003eEach sheet measures 300mm (≈11.8\") wide × 1000mm (≈39.4\") long and is available in thicknesses from 0.05mm (≈0.002\") to 0.5mm (≈0.020\"). The material is cold-rolled 304 austenitic stainless steel with a smooth, mill-finish surface. Select your exact thickness from the variant options above — all sizes ship as individual flat sheets.\u003c\/p\u003e\n    \u003cp\u003eTypical applications include precision shimming under CNC fixtures and machine bases, custom-cut gaskets for plumbing and HVAC joints, heat shields and thermal barriers in automotive fabrication, and thin wear strips or slide plates in woodworking jigs and mechanical assemblies. Long-tail searches like \"thin stainless steel shim stock\" and \"304 SS foil sheet cut to size\" reflect exactly the kind of use cases this product is designed for.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-compat\"\u003e\n    \u003cspan class=\"hdiy-compat-icon\"\u003eℹ️\u003c\/span\u003e\n    \u003cstrong\u003eCompatibility:\u003c\/strong\u003e Suitable for metric and imperial fastener layouts. Can be cut to fit around M3–M20 bolts or 1\/8\"–3\/4\" imperial hardware. Compatible with standard gasket-cutting punches and metal shears.\n  \u003c\/div\u003e\n\n  \u003ch2\u003e✅ Key Features of These 304 Stainless Steel Shim Foil Sheets\u003c\/h2\u003e\n  \u003cul class=\"hdiy-features\"\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📏\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eSeven Precise Thicknesses\u003c\/strong\u003e — Available from 0.05mm to 0.5mm in calibrated increments, giving you the exact shim stock thickness your project demands without guesswork.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔩\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e304 Austenitic Grade\u003c\/strong\u003e — The 18\/8 chromium-nickel composition provides solid corrosion resistance in indoor, outdoor, and mildly humid environments — a reliable choice for general-purpose stainless steel foil strip applications.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e✂️\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eEasy to Cut and Form\u003c\/strong\u003e — Thinner gauges (0.05–0.2mm) cut cleanly with scissors or a utility knife; thicker gauges (0.3–0.5mm) respond well to metal shears or a score-and-snap technique.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📐\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eGenerous Sheet Size\u003c\/strong\u003e — Each piece is 300mm × 1000mm (≈11.8\" × 39.4\"), providing enough material to cut multiple gaskets, shims, or spacer strips from a single sheet.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🌡️\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eTemperature Tolerant\u003c\/strong\u003e — 304 stainless steel retains its mechanical properties across a broad temperature range, making it suitable for use near heat sources, engines, and HVAC components.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🏭\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eSmooth Mill Finish\u003c\/strong\u003e — The cold-rolled surface finish ensures consistent flatness and thickness tolerance across the sheet, important for tight-clearance shimming and sealing applications.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003e📐 Technical Specifications — 304 Stainless Steel Shim Foil Sheet\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-table-wrap\"\u003e\n    \u003ctable\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e304 Stainless Steel (18\/8 Austenitic)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eAvailable Thicknesses\u003c\/th\u003e\n\u003ctd\u003e0.05mm (≈0.002\"), 0.1mm (≈0.004\"), 0.15mm (≈0.006\"), 0.2mm (≈0.008\"), 0.3mm (≈0.012\"), 0.4mm (≈0.016\"), 0.5mm (≈0.020\")\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eSheet Width\u003c\/th\u003e\n\u003ctd\u003e300mm (≈11.8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eSheet Length\u003c\/th\u003e\n\u003ctd\u003e1000mm (≈39.4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eSurface Finish\u003c\/th\u003e\n\u003ctd\u003eCold-rolled, smooth mill finish\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eChromium Content\u003c\/th\u003e\n\u003ctd\u003eApproximately 18%\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eNickel Content\u003c\/th\u003e\n\u003ctd\u003eApproximately 8%\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eTensile Strength (typical)\u003c\/th\u003e\n\u003ctd\u003e≈515 MPa (75,000 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eYield Strength (typical)\u003c\/th\u003e\n\u003ctd\u003e≈205 MPa (30,000 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eMagnetism\u003c\/th\u003e\n\u003ctd\u003eGenerally non-magnetic (austenitic; may exhibit slight magnetism after cold working)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eQuantity per Order\u003c\/th\u003e\n\u003ctd\u003e1 sheet per variant selected\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-note\"\u003e\n    \u003cspan class=\"hdiy-note-icon\"\u003e⚠️\u003c\/span\u003e\n    \u003cstrong\u003eNote:\u003c\/strong\u003e Cut edges are sharp. Always wear cut-resistant gloves when handling and trimming stainless steel foil sheet. For marine or high-chloride environments, consider 316 stainless steel instead.\n  \u003c\/div\u003e\n\n  \u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-faq\"\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I choose the right thickness for my application?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eThickness selection depends on the gap you need to fill or the flexibility required. For precision shimming and gaskets, thinner foils (0.05–0.1mm) are generally used. For structural spacers or wear strips, 0.3–0.5mm is typically more appropriate. When in doubt, measure the gap with a feeler gauge first — then select the closest available thickness from the variant options above.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat is the tensile strength of this 304 stainless steel shim sheet?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003e304 stainless steel typically has a tensile strength of around 515 MPa (75,000 psi) and a yield strength of approximately 205 MPa (30,000 psi). Thin foil gauges may vary slightly due to cold-rolling processes. For load-bearing structural applications, consult a materials engineer to confirm suitability.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan this stainless steel foil sheet be used outdoors or in wet environments?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eYes. 304 stainless steel offers good corrosion resistance in most outdoor environments, including rain, humidity, and mild industrial exposure. It is generally suitable for outdoor shimming, roofing flashing, and HVAC applications. For highly saline or chloride-rich environments (e.g., coastal or marine), 316 stainless steel is typically recommended instead.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eIs this compatible with metric and imperial fastener layouts?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eYes. Because this is a flat sheet product, it can be cut to fit around any bolt pattern — metric (M3–M20 and beyond) or imperial (1\/8\" to 3\/4\" and larger). Use a gasket punch, hole saw, or drill press to create bolt clearance holes in the shim material.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan I cut or bend this stainless steel foil at home?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eYes. Thinner gauges (0.05–0.2mm) can typically be cut with sharp scissors or a utility knife and bent by hand. Thicker gauges (0.3–0.5mm) generally require metal shears or a score-and-snap method. Always wear cut-resistant gloves — freshly cut stainless steel edges are sharp.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eIs 304 stainless steel the same as 18\/8 stainless steel?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eYes. 304 stainless steel is commonly referred to as 18\/8 stainless, indicating approximately 18% chromium and 8% nickel content. It is one of the most widely used austenitic stainless steel grades for general-purpose applications including shim stock, food-contact surfaces, and architectural trim.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat is the practical difference between 0.05mm and 0.5mm thickness?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003e0.05mm (≈0.002\" or 2 thou) is an ultra-thin foil — flexible, lightweight, and ideal for fine shimming, sealing, or wrapping applications. 0.5mm (≈0.020\" or 20 thou) is a stiffer strip better suited for structural spacers, wear plates, or heavier-duty gaskets. Choose based on the rigidity and gap tolerance your project requires.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWill this stainless steel sheet rust or stain over time?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003e304 stainless steel is highly resistant to rust and staining under normal conditions. Surface discoloration can occasionally occur if exposed to prolonged contact with iron particles, harsh cleaning chemicals, or high-chloride environments. In most cases, a wipe-down with a mild stainless steel cleaner will restore the surface appearance.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-cta\"\u003e\n    🛒 Select your thickness above, then add to cart — ships from our US warehouse.\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"HomeDIYer","offers":[{"title":"0.1x300x1000mm","offer_id":52378554106130,"sku":"GLFBWJJGLBZSJ012593x1","price":22.81,"currency_code":"USD","in_stock":true},{"title":"0.05x300x1000mm","offer_id":52378554138898,"sku":"GLFBWJJGLBZSJ012594x1","price":20.73,"currency_code":"USD","in_stock":true},{"title":"0.15x300x1000mm","offer_id":52378554171666,"sku":"GLFBWJJGLBZSJ012595x1","price":32.04,"currency_code":"USD","in_stock":true},{"title":"0.2x300x1000mm","offer_id":52378554204434,"sku":"GLFBWJJGLBZSJ012596x1","price":37.94,"currency_code":"USD","in_stock":true},{"title":"0.3x300x1000mm","offer_id":52378554237202,"sku":"GLFBWJJGLBZSJ012597x1","price":54.62,"currency_code":"USD","in_stock":true},{"title":"0.4x300x1000mm","offer_id":52378554269970,"sku":"GLFBWJJGLBZSJ012598x1","price":73.58,"currency_code":"USD","in_stock":true},{"title":"0.5x300x1000mm","offer_id":52378554302738,"sku":"GLFBWJJGLBZSJ012599x1","price":91.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/Picture1of6_48befca0-0cf5-4abe-ba26-3e81d3320b94.jpg?v=1781600972","url":"https:\/\/homediyer.com\/de\/products\/304-stainless-steel-shim-foil-sheet-strip-metal-band","provider":"HomeDIYer","version":"1.0","type":"link"}