{"product_id":"a2-stainless-steel-wire-rope-7x7-pvc-coated-6mm-12mm","title":"A2 Stainless Steel Wire Rope Metal Cable Rigging Clear PVC Coated 7x7 6mm - 12mm","description":"\u003cdiv class=\"hdiy-desc\"\u003e\n\n\u003ch2\u003eA2 Stainless Steel Wire Rope — Corrosion-Resistant PVC Coated Cable for Balustrades \u0026amp; Rigging\u003c\/h2\u003e\n\n\u003cdiv class=\"hdiy-overview\"\u003e\n\u003cp\u003eWhen your deck railing, staircase balustrade, or outdoor rigging setup demands a cable that won't rust, sag, or degrade under UV and moisture exposure, standard galvanised wire simply falls short. Builders, DIY renovators, and marine riggers who need long-term reliability in exposed environments turn to A2 stainless steel wire rope with a clear PVC coating for a clean, low-maintenance solution.\u003c\/p\u003e\n\u003cp\u003eThis wire rope is constructed with a 7×7 strand configuration — seven strands of seven wires each — giving it a balance of flexibility and tensile strength. The A2 (304-grade) stainless steel core is encased in a transparent PVC sleeve, available in diameters from 6.0mm to 12mm (approximately 1\/4\" to 1\/2\"), and cut-to-length options of 1m, 2m, 3m, and 5m (approximately 3.3ft to 16.4ft).\u003c\/p\u003e\n\u003cp\u003eTypical applications include stainless steel balustrade wire rope for deck and stair infill panels, tensioned cable railing systems for residential and commercial builds, marine and boat rigging where salt-air corrosion resistance is critical, and general outdoor lifting or tie-down rigging where a smooth, snag-free surface is needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"hdiy-compat\"\u003e\n\u003cspan class=\"hdiy-compat-icon\"\u003e⚙️\u003c\/span\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for use with standard 6mm–12mm swage fittings, jaw-and-jaw turnbuckles, wire rope clips, and ferrule sleeves. Confirm fitting bore size matches your selected cable diameter before ordering.\n\u003c\/div\u003e\n\n\u003ch2\u003e✅ Key Features of These A2 Stainless Steel Wire Rope Cables\u003c\/h2\u003e\n\u003cdiv class=\"hdiy-features\"\u003e\n\u003cdiv\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔩\u003c\/span\u003e\n\u003cstrong\u003e7×7 Strand Construction\u003c\/strong\u003e\n\u003cp\u003e49-wire configuration delivers a flexible yet strong cable suitable for curved runs and tensioned balustrade infill without kinking under normal installation loads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🛡️\u003c\/span\u003e\n\u003cstrong\u003eA2 (304) Stainless Steel Core\u003c\/strong\u003e\n\u003cp\u003eGrade 304 stainless steel resists oxidation and surface rust in outdoor, coastal, and mildly marine environments — a step up from standard galvanised wire in corrosion performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔍\u003c\/span\u003e\n\u003cstrong\u003eClear PVC Outer Sleeve\u003c\/strong\u003e\n\u003cp\u003eThe transparent coating protects the wire from abrasion and surface contamination while keeping the metallic appearance visible — ideal for architectural balustrade applications where aesthetics matter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📏\u003c\/span\u003e\n\u003cstrong\u003eFour Diameter Options: 6mm – 12mm\u003c\/strong\u003e\n\u003cp\u003eChoose from 6.0mm, 8.0mm, 10mm, or 12mm to match your fitting hardware and load requirements. Larger diameters suit heavier structural or rigging applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan class=\"hdiy-icon\"\u003e✂️\u003c\/span\u003e\n\u003cstrong\u003eCut-to-Length Variants: 1m – 5m\u003c\/strong\u003e\n\u003cp\u003eAvailable in 1m, 2m, 3m, and 5m lengths so you can order exactly what your project needs and minimise offcut waste on balustrade panel runs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🌊\u003c\/span\u003e\n\u003cstrong\u003eOutdoor \u0026amp; Coastal Use Ready\u003c\/strong\u003e\n\u003cp\u003eThe combination of 304 stainless steel and PVC coating makes this cable suitable for decks, pergolas, pool fencing, and light marine rigging where moisture and UV exposure are ongoing concerns.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003e📐 Technical Specifications — Stainless Steel Wire Rope\u003c\/h2\u003e\n\u003cdiv class=\"hdiy-table-wrap\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eA2 Grade 304 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrand Construction\u003c\/th\u003e\n\u003ctd\u003e7×7 (49 wires total)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoating\u003c\/th\u003e\n\u003ctd\u003eClear PVC sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailable Diameters\u003c\/th\u003e\n\u003ctd\u003e6.0mm, 8.0mm, 10mm, 12mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailable Lengths\u003c\/th\u003e\n\u003ctd\u003e1m, 2m, 3m, 5m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour \/ Finish\u003c\/th\u003e\n\u003ctd\u003eSilver (stainless) with clear PVC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType \/ Application\u003c\/th\u003e\n\u003ctd\u003eBalustrade, rigging, cable railing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBreaking Load (approx.)\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight per Metre\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Fittings\u003c\/th\u003e\n\u003ctd\u003eSwage terminals, wire rope clips, ferrule sleeves\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"hdiy-faq\"\u003e\n\u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhich diameter should I choose for a deck balustrade infill?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eFor residential deck and stair balustrade infill panels, 6.0mm or 8.0mm wire rope is the most common choice. 6.0mm suits lighter tensioned runs with shorter spans (typically under 2m between posts), while 8.0mm is preferred for longer spans or where building codes require a higher breaking load. Always verify your local code requirements for balustrade cable spacing and load ratings before finalising your selection.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the breaking load of this wire rope?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eBreaking load varies by diameter. As a general guide for 7×7 A2 stainless wire rope: 6.0mm is typically rated around 13–16 kN, 8.0mm around 22–28 kN, 10mm around 34–42 kN, and 12mm around 50–60 kN. These are approximate figures — confirm the exact rated load for your specific variant before use in structural or safety-critical applications.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs A2 (304) stainless steel suitable for marine or saltwater environments?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eA2 \/ 304 stainless steel performs well in mildly marine environments such as coastal decks and pool surrounds. For direct saltwater immersion or highly aggressive marine environments (e.g., boat rigging in open ocean conditions), A4 \/ 316 marine-grade stainless steel is generally recommended for superior chloride resistance. This product is A2 grade — suitable for coastal outdoor use but not intended for continuous saltwater submersion.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eCan I cut this wire rope to a custom length?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eThe product is sold in fixed cut lengths of 1m, 2m, 3m, and 5m. If you need an intermediate length, select the next size up and trim on-site using a wire rope cutter or angle grinder with a cutting disc. Apply end ferrules or heat-shrink immediately after cutting to prevent strand fraying.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat fittings are compatible with this PVC-coated wire rope?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eThis cable is compatible with standard swage terminals, jaw-and-jaw or eye-and-eye turnbuckles, wire rope clips (bulldog grips), and aluminium or copper ferrule sleeves — provided the fitting bore matches the cable's outer diameter including the PVC coating. Note that the PVC sleeve adds approximately 0.5–1.0mm to the bare wire diameter; confirm fitting bore size against the coated OD before ordering hardware.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do I tension this cable correctly for a balustrade installation?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eThread the cable through your post drillings or fittings, attach a swage or ferrule termination at one end, then use a turnbuckle or tensioner at the opposite end to draw the cable taut. For balustrade infill, cables should be firm to the touch with minimal lateral deflection — typically tensioned to around 10–15% of the cable's breaking load. Over-tensioning can bow timber or aluminium posts inward; check post alignment as you tension each run. If unsure, consult a licensed builder or structural engineer for your specific installation.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"hdiy-cta\"\u003e\n🛒 Select your Size and Length above, then add to cart.\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Which diameter should I choose for a deck balustrade infill?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"For residential deck and stair balustrade infill panels, 6.0mm or 8.0mm wire rope is the most common choice. 6.0mm suits lighter tensioned runs with shorter spans (typically under 2m between posts), while 8.0mm is preferred for longer spans or where building codes require a higher breaking load. Always verify your local code requirements for balustrade cable spacing and load ratings before finalising your selection.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the breaking load of this wire rope?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Breaking load varies by diameter. As a general guide for 7x7 A2 stainless wire rope: 6.0mm is typically rated around 13–16 kN, 8.0mm around 22–28 kN, 10mm around 34–42 kN, and 12mm around 50–60 kN. These are approximate figures — confirm the exact rated load for your specific variant before use in structural or safety-critical applications.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is A2 (304) stainless steel suitable for marine or saltwater environments?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"A2 \/ 304 stainless steel performs well in mildly marine environments such as coastal decks and pool surrounds. For direct saltwater immersion or highly aggressive marine environments, A4 \/ 316 marine-grade stainless steel is generally recommended. This product is A2 grade — suitable for coastal outdoor use but not intended for continuous saltwater submersion.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I cut this wire rope to a custom length?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The product is sold in fixed cut lengths of 1m, 2m, 3m, and 5m. If you need an intermediate length, select the next size up and trim on-site using a wire rope cutter or angle grinder with a cutting disc. Apply end ferrules or heat-shrink immediately after cutting to prevent strand fraying.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What fittings are compatible with this PVC-coated wire rope?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"This cable is compatible with standard swage terminals, jaw-and-jaw or eye-and-eye turnbuckles, wire rope clips (bulldog grips), and aluminium or copper ferrule sleeves — provided the fitting bore matches the cable's outer diameter including the PVC coating. The PVC sleeve adds approximately 0.5–1.0mm to the bare wire diameter; confirm fitting bore size against the coated OD before ordering hardware.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I tension this cable correctly for a balustrade installation?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Thread the cable through your post drillings or fittings, attach a swage or ferrule termination at one end, then use a turnbuckle or tensioner at the opposite end to draw the cable taut. For balustrade infill, cables should be firm to the touch with minimal lateral deflection — typically tensioned to around 10–15% of the cable's breaking load. Over-tensioning can bow timber or aluminium posts inward; check post alignment as you tension each run.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"HomeDIYer","offers":[{"title":"6.0mm \/ 1m","offer_id":52378345505042,"sku":"GYZLLZYBXG0041x1","price":15.08,"currency_code":"USD","in_stock":true},{"title":"8.0mm \/ 1m","offer_id":52378345537810,"sku":"GYZLLZYBXG0042x1","price":22.43,"currency_code":"USD","in_stock":true},{"title":"10mm \/ 1m","offer_id":52378345570578,"sku":"GYZLLZYBXG0043x1","price":36.84,"currency_code":"USD","in_stock":true},{"title":"12mm \/ 1m","offer_id":52378345603346,"sku":"GYZLLZYBXG0044x1","price":62.14,"currency_code":"USD","in_stock":true},{"title":"6.0mm \/ 2m","offer_id":52378345636114,"sku":"GYZLLZYBXG0041x2","price":28.14,"currency_code":"USD","in_stock":true},{"title":"8.0mm \/ 2m","offer_id":52378345668882,"sku":"GYZLLZYBXG0042x2","price":42.83,"currency_code":"USD","in_stock":true},{"title":"10mm \/ 2m","offer_id":52378345701650,"sku":"GYZLLZYBXG0043x2","price":82.48,"currency_code":"USD","in_stock":true},{"title":"12mm \/ 2m","offer_id":52378345734418,"sku":"GYZLLZYBXG0044x2","price":121.98,"currency_code":"USD","in_stock":true},{"title":"6.0mm \/ 3m","offer_id":52378345767186,"sku":"GYZLLZYBXG0041x3","price":41.19,"currency_code":"USD","in_stock":true},{"title":"8.0mm \/ 3m","offer_id":52378345799954,"sku":"GYZLLZYBXG0042x3","price":72.96,"currency_code":"USD","in_stock":true},{"title":"10mm \/ 3m","offer_id":52378345832722,"sku":"GYZLLZYBXG0043x3","price":122.6,"currency_code":"USD","in_stock":true},{"title":"12mm \/ 3m","offer_id":52378345865490,"sku":"GYZLLZYBXG0044x3","price":181.9,"currency_code":"USD","in_stock":true},{"title":"6.0mm \/ 5m","offer_id":52378345898258,"sku":"GYZLLZYBXG0041x5","price":77.72,"currency_code":"USD","in_stock":true},{"title":"8.0mm \/ 5m","offer_id":52378345931026,"sku":"GYZLLZYBXG0042x5","price":120.07,"currency_code":"USD","in_stock":true},{"title":"10mm \/ 5m","offer_id":52378345963794,"sku":"GYZLLZYBXG0043x5","price":202.76,"currency_code":"USD","in_stock":true},{"title":"12mm \/ 5m","offer_id":52378345996562,"sku":"GYZLLZYBXG0044x5","price":301.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/Main-01_bd8d1fbf-fa2d-450d-ad4e-196611bdb9dd.jpg?v=1781775500","url":"https:\/\/homediyer.com\/de\/products\/a2-stainless-steel-wire-rope-7x7-pvc-coated-6mm-12mm","provider":"HomeDIYer","version":"1.0","type":"link"}