Clear PVC Heat Shrink Tubing — Transparent Wrap for RC Battery, LED & Wire (7mm–300mm Flat)

Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild

Clear PVC Heat Shrink Tubing — Transparent Wrap for RC Battery, LED & Wire (7mm–300mm Flat)

HomeDIYer

Keine Bewertungen

By HomeDIYer®

Color: Transparent

Flat wide (Diameter): 7mm ( Ø4.5mm )

Packing Qty: 1m

Preis:

$5.75 USD

Lagerbestand:

Verfügbar (500 Stück), versandbereit

Menge:

Teile dieses Produkt

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

Clear PVC Heat Shrink Tubing — Transparent Protection for RC Batteries, LED Strips & Wire Bundles

If you've ever struggled to find a clean, professional way to wrap RC battery packs, protect LED pin connectors, or bundle loose wiring without hiding what's underneath, clear PVC heat shrink tubing is the solution. Hobbyists, electronics technicians, and DIY builders rely on this transparent wrap to add a layer of protection while keeping components fully visible for inspection.

Each roll is made from flexible, transparent PVC with a 2:1 shrink ratio. Available in flat widths from 7mm (≈9/32") up to 300mm (≈11.8"), with recovered inner diameters ranging from Ø4.5mm to Ø191mm. Packing quantities range from 1m (≈3.3 ft) sample lengths up to 200m (≈656 ft) bulk rolls — ideal for both one-off projects and production runs.

Typical applications include wrapping LiPo and NiMH RC battery packs for a factory-fresh finish, sleeving LED strip connectors and pin headers, bundling and color-coding wire harnesses in automotive and marine builds, and protecting copper pipe joints or small-diameter tubing in light plumbing work.

ℹ️ Compatibility Note: This tubing is transparent PVC with a standard 2:1 shrink ratio. It is compatible with most low-voltage wiring, RC battery packs, and LED assemblies. The recovered inner diameter (Ø) is listed in each variant name — select the flat width whose recovered Ø is slightly larger than your component's outer diameter.

✅ Key Features of These Clear PVC Heat Shrink Tubes

🔍Fully Transparent Finish — Crystal-clear PVC lets you inspect battery cells, solder joints, and wire connections without removing the sleeve, making it a go-to choice for RC battery pack wrapping.
📏Wide Size Range — Flat widths from 7mm to 300mm (recovered Ø4.5mm–Ø191mm) cover everything from small LED pin connectors to large-diameter pipe and cable bundles.
🔥Low Activation Temperature — Shrinks reliably at approximately 70–90°C (158–194°F), so a standard heat gun or even a hair dryer is sufficient — no industrial equipment required.
✂️Cut-to-Length Flexibility — Supplied on continuous rolls (1m to 200m), so you cut exactly what you need for each job with no waste from pre-cut pieces.
🛡️Moisture & Abrasion Resistance — PVC construction provides a protective barrier against light moisture, dust, and surface abrasion, extending the service life of wrapped components.
⚡Low-Voltage Insulation — Generally rated for applications up to 600V, making it suitable for wire insulation, connector protection, and battery pack sleeving in hobby and light electrical work.

📐 Technical Specifications — Clear PVC Heat Shrink Tubing

Material	PVC (Polyvinyl Chloride)
Color / Finish	Transparent (Clear)
Shrink Ratio	2:1 (typically)
Flat Width Range	7mm (≈9/32") – 300mm (≈11.8")
Recovered Inner Diameter	Ø4.5mm – Ø191mm (see variant options)
Activation Temperature	Typically 70–90°C (158–194°F)
Voltage Rating	Generally up to 600V (low-voltage use)
Packing Quantity	1m / 3m / 5m / 10m / 20m / 50m / 100m / 200m (see variant options)
Wall Thickness (before shrink)	See variant options
Suitable Applications	RC battery packs, LED connectors, wire bundling, light pipe protection
Outdoor Use	Light outdoor use; not a fully waterproof seal
Country of Origin	Contact us to confirm

⚠️ Size Selection Tip: The flat width listed is the tubing's width when laid flat. The recovered inner diameter (Ø) shown in each variant name is the approximate inner diameter after full shrinkage. Always verify your component's outer diameter against the recovered Ø before ordering.

❓ Frequently Asked Questions

How do I choose the right flat width for my application?

Measure the diameter of the object you want to cover, then choose a flat width that is roughly 1.5–2× that diameter. For example, a 10mm diameter object typically needs a flat width of 15–20mm. When in doubt, size up — PVC heat shrink generally shrinks to about 50% of its flat width. The recovered inner diameter (Ø) is listed in each variant name for easy reference.

What is the shrink ratio of this PVC tubing?

This tubing is generally rated at a 2:1 shrink ratio, meaning it shrinks to approximately half its original flat width when heat is applied. The inner diameter after shrinking is listed in the variant name (e.g., "7mm flat = Ø4.5mm recovered").

What temperature is needed to shrink this tubing?

PVC heat shrink tubing typically activates at around 70–90°C (158–194°F). A heat gun on a low setting, a hair dryer, or even hot water can be used. Avoid open flames, which can scorch or melt the material unevenly. Move the heat source continuously for an even shrink.

Is this tubing suitable for outdoor or waterproof use?

This clear PVC tubing provides basic moisture resistance and is suitable for light indoor and outdoor use. However, it is not a dual-wall adhesive-lined tubing, so it does not create a fully waterproof seal. For fully waterproof applications, consider dual-wall heat shrink with a glue lining.

Can I use this on RC battery packs?

Yes. This is a popular choice for wrapping RC LiPo and NiMH battery packs. The transparent finish lets you inspect the cells underneath while providing a clean, protective layer. Select a flat width that matches or slightly exceeds your battery pack's perimeter divided by 2. For example, a battery pack with a 60mm perimeter would typically use a 30–36mm flat width.

What is the voltage rating of this PVC heat shrink tubing?

PVC heat shrink tubing of this type is generally rated for low-voltage applications, typically up to 600V. For high-voltage or industrial electrical insulation, please contact us to confirm suitability for your specific use case.

How do I cut the tubing to the right length?

Use scissors or a sharp utility knife. Cut the tubing slightly longer than the area you need to cover — typically 5–10% extra — to account for any lengthwise shrinkage that may occur during the heat application process.

🛒 Select your flat width and length above, then add to cart — ships from our US warehouse.

Clear PVC Heat Shrink Tubing — Transparent Wrap for RC Battery, LED & Wire (7mm–300mm Flat)

Payment & Security

Let customers speak for us

DIY Expert Support

Beschreibung

Clear PVC Heat Shrink Tubing — Transparent Protection for RC Batteries, LED Strips & Wire Bundles

✅ Key Features of These Clear PVC Heat Shrink Tubes

📐 Technical Specifications — Clear PVC Heat Shrink Tubing

❓ Frequently Asked Questions

Clear PVC Heat Shrink Tubing — Transparent Wrap for RC Battery, LED & Wire (7mm–300mm Flat)

You may also like

Recently viewed