{"product_id":"m6-countersunk-sleeve-anchor-expansion-bolts-stainless-steel","title":"M6 Countersunk Sleeve Anchor Expansion Bolts — 304 \/ 201 Stainless Steel, Cross Drive","description":"\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I choose the right bolt length for my application?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"A general rule: the anchor length should be at least 3–4 times the bolt diameter plus the material thickness being fastened. For M6 anchors, add the thickness of your fixture to the minimum embedment depth (typically 25–35mm) to determine the total length needed. Available lengths range from 52mm (≈2.0\\u2033) to 182mm (≈7.2\\u2033).\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the load capacity of these sleeve anchors?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Load capacity depends on the base material (concrete grade, brick, or block), embedment depth, and edge\/spacing distances. For M6 sleeve anchors in standard concrete, tensile loads are typically in the range of 3–8 kN. Always consult a structural engineer for load-critical applications.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can these expansion bolts be used outdoors or in wet environments?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. 304 stainless steel offers good corrosion resistance for most outdoor and humid environments. For coastal or highly corrosive environments, 316 stainless steel is generally recommended. 201 stainless steel is suitable for indoor or mildly humid conditions.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What thread standard do these bolts use?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"These anchors use M6 metric coarse thread, which is the international standard. They are compatible with standard M6 metric nuts and fixtures. They are not designed for UNC\/UNF inch-standard threads.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the difference between 304 and 201 stainless steel for these anchors?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"304 stainless steel contains higher nickel content, giving it better corrosion resistance and durability in outdoor or damp conditions. 201 stainless steel is a cost-effective alternative suitable for indoor or low-humidity applications where extreme corrosion resistance is not required.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What base materials are these sleeve anchors compatible with?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"These countersunk sleeve anchors are generally suitable for solid concrete, brick, and natural stone. They are not recommended for hollow block, drywall, or soft masonry without additional engineering review.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What drill bit size do I need to install these anchors?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"For M6 sleeve anchors, you typically need a 10mm masonry or hammer drill bit to match the anchor body diameter. Always use a carbide-tipped masonry bit and drill to the recommended depth marked on the anchor or packaging.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n\n\u003cdiv class=\"hdiy-desc\"\u003e\n\n  \u003cdiv class=\"hdiy-overview\"\u003e\n    \u003ch2\u003eM6 Countersunk Sleeve Anchor Expansion Bolts — Flush-Mount Fastening for Concrete \u0026amp; Masonry\u003c\/h2\u003e\n    \u003cp\u003eWhen you need a clean, flush finish on concrete walls, stone facades, or brick structures, standard hex-head anchors leave an exposed protrusion that catches the eye and can snag cables, trim, or fixtures. These M6 countersunk sleeve anchor expansion bolts are built for installers, contractors, and serious DIYers who need a secure, low-profile fastening point in hard base materials without compromise.\u003c\/p\u003e\n    \u003cp\u003eEach bolt features an M6 metric coarse thread with a 10mm anchor body diameter and a countersunk cross (Phillips-compatible) drive head that sits flush with the surface once installed. Available in 304 Stainless Steel (higher corrosion resistance) and 201 Stainless Steel (cost-effective for indoor use), with lengths ranging from 52mm (≈2.0\") to 182mm (≈7.2\") to cover a wide range of embedment depths and fixture thicknesses. Sold in packs of 1, 2, 5, 10, or 20 pieces to match your project scale.\u003c\/p\u003e\n    \u003cp\u003eTypical applications include anchoring curtain wall brackets and facade cladding clips to concrete, securing handrail posts and balustrade bases to stone steps, mounting electrical conduit straps and cable trays flush to masonry walls, and fastening structural brackets in commercial fit-outs where a countersunk sleeve anchor for concrete is specified.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-compat\"\u003e\n    \u003cspan class=\"hdiy-compat-icon\"\u003eℹ️\u003c\/span\u003e\n    \u003cstrong\u003eCompatibility Note:\u003c\/strong\u003e These are M6 metric thread anchors with a 10mm body diameter. Suitable for solid concrete, brick, and natural stone. Not recommended for hollow block or soft masonry. Confirm hole depth and edge distances before installation.\n  \u003c\/div\u003e\n\n  \u003ch2\u003e✅ Key Features of These M6 Countersunk Sleeve Anchor Expansion Bolts\u003c\/h2\u003e\n  \u003cul class=\"hdiy-features\"\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔩\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eFlush Countersunk Head\u003c\/strong\u003e — The countersunk cross-drive head sits level with the surface after installation, eliminating protrusions that interfere with trim, panels, or foot traffic in finished concrete anchoring applications.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🛡️\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eDual Material Options\u003c\/strong\u003e — Choose 304 stainless steel for outdoor, humid, or corrosion-exposed environments, or 201 stainless steel for indoor and cost-sensitive projects — both resist rust far better than carbon steel fasteners.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📏\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e8 Length Options (52–182mm)\u003c\/strong\u003e — From 52mm (≈2.0\") for shallow embedment in thin slabs to 182mm (≈7.2\") for deep anchoring in thick masonry walls, covering the full range of stainless steel sleeve anchor length requirements.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e⚙️\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eCross Drive Compatibility\u003c\/strong\u003e — The Phillips-compatible cross recess works with standard #2 or #3 Phillips bits and most impact drivers, making installation straightforward without specialty tooling.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🏗️\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eExpansion Sleeve Mechanism\u003c\/strong\u003e — The sleeve expands radially against the drilled hole wall as the bolt is tightened, creating a mechanical interlock in concrete or brick that resists pull-out forces in structural and semi-structural masonry fastening tasks.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📦\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eFlexible Pack Sizes\u003c\/strong\u003e — Available in 1, 2, 5, 10, or 20-piece packs so you can buy exactly what a single repair needs or stock up for a full commercial installation without overpaying for excess hardware.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003e📐 Technical Specifications — M6 Countersunk Sleeve Anchor Expansion Bolts\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-table-wrap\"\u003e\n    \u003ctable\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCountersunk Head Sleeve Anchor Expansion Bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eDrive Style\u003c\/th\u003e\n\u003ctd\u003eCross (Phillips-compatible)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eThread Diameter\u003c\/th\u003e\n\u003ctd\u003eM6 (6mm \/ ≈0.24\")\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eAnchor Body Diameter\u003c\/th\u003e\n\u003ctd\u003e10mm (≈3\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eAvailable Lengths\u003c\/th\u003e\n\u003ctd\u003e52mm (≈2.0\"), 72mm (≈2.8\"), 92mm (≈3.6\"), 102mm (≈4.0\"), 112mm (≈4.4\"), 132mm (≈5.2\"), 152mm (≈6.0\"), 182mm (≈7.2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eThread Standard\u003c\/th\u003e\n\u003ctd\u003eMetric Coarse (M6)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eMaterial Options\u003c\/th\u003e\n\u003ctd\u003e304 Stainless Steel \/ 201 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eHead Style\u003c\/th\u003e\n\u003ctd\u003eCountersunk (flush-mount)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eRecommended Drill Bit\u003c\/th\u003e\n\u003ctd\u003e10mm carbide-tipped masonry bit\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCompatible Base Materials\u003c\/th\u003e\n\u003ctd\u003eSolid concrete, brick, natural stone\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003ePack Sizes Available\u003c\/th\u003e\n\u003ctd\u003e1, 2, 5, 10, 20 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eMinimum Embedment Depth\u003c\/th\u003e\n\u003ctd\u003eSee variant options \/ Contact us to confirm\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eRated Load Capacity\u003c\/th\u003e\n\u003ctd\u003eContact us to confirm (depends on base material and embedment)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-note\"\u003e\n    \u003cspan class=\"hdiy-note-icon\"\u003e⚠️\u003c\/span\u003e\n    \u003cstrong\u003eSpec Confirmation:\u003c\/strong\u003e Rated load values vary by base material grade, embedment depth, and edge distance. For structural or load-bearing applications, please contact us to confirm suitability before ordering.\n  \u003c\/div\u003e\n\n  \u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-faq\"\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I choose the right bolt length for my application?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eA general rule: the anchor length should be at least 3–4 times the bolt diameter plus the thickness of the material being fastened. For M6 anchors, add your fixture thickness to the minimum embedment depth (typically 25–35mm) to determine the total length needed. Available lengths run from 52mm (≈2.0\") to 182mm (≈7.2\"). For example, fastening a 20mm bracket to concrete with 40mm embedment requires at least a 60mm anchor — the 72mm option would be appropriate.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat is the load capacity of these sleeve anchors?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eLoad capacity depends on the base material (concrete grade, brick, or block), embedment depth, and edge\/spacing distances. For M6 sleeve anchors in standard concrete, tensile loads are typically in the range of 3–8 kN. Shear capacity is generally higher. Always consult a structural engineer for load-critical applications, and contact us to confirm specifications for your specific use case.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan these expansion bolts be used outdoors or in wet environments?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eYes. 304 stainless steel offers good corrosion resistance for most outdoor, humid, and mildly corrosive environments — including exterior facades, garden walls, and covered outdoor structures. For coastal, marine, or highly chloride-rich environments, 316 stainless steel is generally recommended. 201 stainless steel is best suited for indoor or low-humidity conditions.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat thread standard do these bolts use, and are they compatible with my fixtures?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eThese anchors use M6 metric coarse thread — the international standard used across most European and Asian-manufactured hardware. They are compatible with standard M6 metric nuts, washers, and threaded fixtures. They are not designed for UNC or UNF inch-standard threads. If your fixture uses imperial threads, an adapter or different anchor type would be needed.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat is the difference between 304 and 201 stainless steel for these anchors?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003e304 stainless steel contains a higher nickel content (typically 8–10%), giving it superior corrosion resistance and longer service life in outdoor or damp conditions. 201 stainless steel uses manganese in place of some nickel, making it a more economical option that still outperforms carbon steel in corrosion resistance — but is generally recommended for indoor or low-humidity applications only.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat base materials are these sleeve anchors compatible with?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eThese countersunk sleeve anchors are generally suitable for solid concrete, dense brick, and natural stone. They are not recommended for hollow block, aerated concrete (AAC), drywall, or soft masonry without additional engineering review. The expansion mechanism requires a solid, non-crumbling hole wall to develop full holding strength.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat drill bit size do I need to install these anchors?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eFor M6 sleeve anchors with a 10mm body diameter, you typically need a \u003cstrong\u003e10mm carbide-tipped masonry or hammer drill bit\u003c\/strong\u003e. Use a rotary hammer drill for concrete and brick for best results. Drill to the depth specified on the anchor or at least equal to the anchor length. Clean the hole of dust before inserting the anchor.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I install a countersunk sleeve anchor correctly?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003e1. Drill a 10mm hole to the required depth using a masonry bit. 2. Clear dust from the hole with a brush or compressed air. 3. Insert the sleeve anchor through your fixture and into the hole. 4. Use a Phillips or cross-head driver to tighten the bolt — the sleeve expands as you turn. 5. Tighten until the head sits flush with the fixture surface. Do not overtighten, as this can crack the base material around the hole.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-cta\"\u003e\n    🛒 Select your \u003cstrong\u003ematerial, size, and pack quantity\u003c\/strong\u003e above, then add to cart — ships from our US warehouse.\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"HomeDIYer","offers":[{"title":"304 Stainless Steel \/ M6x10x52mm | (304) \/ 2","offer_id":52308939309330,"sku":"GYLXGY-TCWJTC6216x1","price":8.96,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x72mm | (304) \/ 2","offer_id":52308939342098,"sku":"GYLXGY-TCWJTC6217x1","price":9.04,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x92mm | (304) \/ 2","offer_id":52308939374866,"sku":"GYLXGY-TCWJTC6218x1","price":9.51,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x102mm | (304) \/ 2","offer_id":52308939407634,"sku":"GYLXGY-TCWJTC6219x1","price":10.13,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x112mm | (304) \/ 2","offer_id":52308939440402,"sku":"GYLXGY-TCWJTC6220x1","price":10.87,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x132mm | (304) \/ 1","offer_id":52308939473170,"sku":"GYLXGY-TCWJTC6221x1","price":8.01,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x152mm | (304) \/ 1","offer_id":52308939505938,"sku":"GYLXGY-TCWJTC6222x1","price":8.5,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x182mm | (304) \/ 1","offer_id":52308939538706,"sku":"GYLXGY-TCWJTC6223x1","price":9.18,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x52mm | (201) \/ 2","offer_id":52308939571474,"sku":"GYLXGY-TCWJTC6224x1","price":8.28,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x72mm | (201) \/ 2","offer_id":52308939604242,"sku":"GYLXGY-TCWJTC6225x1","price":8.36,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x92mm | (201) \/ 2","offer_id":52308939637010,"sku":"GYLXGY-TCWJTC6226x1","price":8.83,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x102mm | (201) \/ 2","offer_id":52308939669778,"sku":"GYLXGY-TCWJTC6227x1","price":9.37,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x112mm | (201) \/ 2","offer_id":52308939702546,"sku":"GYLXGY-TCWJTC6228x1","price":10.05,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x132mm | (201) \/ 2","offer_id":52308939735314,"sku":"GYLXGY-TCWJTC6229x1","price":11.14,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x152mm | (201) \/ 1","offer_id":52308939768082,"sku":"GYLXGY-TCWJTC6230x1","price":7.96,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x182mm | (201) \/ 1","offer_id":52308939800850,"sku":"GYLXGY-TCWJTC6231x1","price":8.5,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x52mm | (304) \/ 10","offer_id":52308939833618,"sku":"GYLXGY-TCWJTC6216x5","price":28.63,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x72mm | (304) \/ 10","offer_id":52308939866386,"sku":"GYLXGY-TCWJTC6217x5","price":33.17,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x92mm | (304) \/ 10","offer_id":52308939899154,"sku":"GYLXGY-TCWJTC6218x5","price":39.29,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x102mm | (304) \/ 10","offer_id":52308939931922,"sku":"GYLXGY-TCWJTC6219x5","price":42.36,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x112mm | (304) \/ 10","offer_id":52308939964690,"sku":"GYLXGY-TCWJTC6220x5","price":46.04,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x132mm | (304) \/ 5","offer_id":52308939997458,"sku":"GYLXGY-TCWJTC6221x5","price":26.91,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x152mm | (304) \/ 5","offer_id":52308940030226,"sku":"GYLXGY-TCWJTC6222x5","price":31.4,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x182mm | (304) \/ 5","offer_id":52308940062994,"sku":"GYLXGY-TCWJTC6223x5","price":37.47,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x52mm | (201) \/ 10","offer_id":52308940095762,"sku":"GYLXGY-TCWJTC6224x5","price":25.5,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x72mm | (201) \/ 10","offer_id":52308940128530,"sku":"GYLXGY-TCWJTC6225x5","price":29.99,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x92mm | (201) \/ 10","offer_id":52308940161298,"sku":"GYLXGY-TCWJTC6226x5","price":35.7,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x102mm | (201) \/ 10","offer_id":52308940194066,"sku":"GYLXGY-TCWJTC6227x5","price":38.56,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x112mm | (201) \/ 10","offer_id":52308940226834,"sku":"GYLXGY-TCWJTC6228x5","price":41.87,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x132mm | (201) \/ 10","offer_id":52308940259602,"sku":"GYLXGY-TCWJTC6229x5","price":47.31,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x152mm | (201) \/ 5","offer_id":52308940292370,"sku":"GYLXGY-TCWJTC6230x5","price":28.68,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x182mm | (201) \/ 5","offer_id":52308940325138,"sku":"GYLXGY-TCWJTC6231x5","price":34.12,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x52mm | (304) \/ 20","offer_id":52308940357906,"sku":"GYLXGY-TCWJTC6216x10","price":55.15,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x72mm | (304) \/ 20","offer_id":52308940390674,"sku":"GYLXGY-TCWJTC6217x10","price":64.31,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x92mm | (304) \/ 20","offer_id":52308940423442,"sku":"GYLXGY-TCWJTC6218x10","price":76.55,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x102mm | (304) \/ 20","offer_id":52308940456210,"sku":"GYLXGY-TCWJTC6219x10","price":90.97,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x112mm | (304) \/ 20","offer_id":52308940488978,"sku":"GYLXGY-TCWJTC6220x10","price":99.13,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x132mm | (304) \/ 10","offer_id":52308940521746,"sku":"GYLXGY-TCWJTC6221x10","price":51.75,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x152mm | (304) \/ 10","offer_id":52308940554514,"sku":"GYLXGY-TCWJTC6222x10","price":60.72,"currency_code":"USD","in_stock":true},{"title":"304 Stainless Steel \/ M6x10x182mm | (304) \/ 10","offer_id":52308940587282,"sku":"GYLXGY-TCWJTC6223x10","price":72.83,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x52mm | (201) \/ 20","offer_id":52308940620050,"sku":"GYLXGY-TCWJTC6224x10","price":48.89,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x72mm | (201) \/ 20","offer_id":52308940652818,"sku":"GYLXGY-TCWJTC6225x10","price":57.87,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x92mm | (201) \/ 20","offer_id":52308940685586,"sku":"GYLXGY-TCWJTC6226x10","price":69.29,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x102mm | (201) \/ 20","offer_id":52308940718354,"sku":"GYLXGY-TCWJTC6227x10","price":83.3,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x112mm | (201) \/ 20","offer_id":52308940751122,"sku":"GYLXGY-TCWJTC6228x10","price":90.83,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x132mm | (201) \/ 20","offer_id":52308940783890,"sku":"GYLXGY-TCWJTC6229x10","price":103.35,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x152mm | (201) \/ 10","offer_id":52308940816658,"sku":"GYLXGY-TCWJTC6230x10","price":55.28,"currency_code":"USD","in_stock":true},{"title":"201 Stainless Steel \/ M6x10x182mm | (201) \/ 10","offer_id":52308940849426,"sku":"GYLXGY-TCWJTC6231x10","price":66.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/Main-04_f686528b-0da0-48d0-a993-66fcc903c77b.jpg?v=1780815045","url":"https:\/\/homediyer.com\/de\/products\/m6-countersunk-sleeve-anchor-expansion-bolts-stainless-steel","provider":"HomeDIYer","version":"1.0","type":"link"}