PVC Flexible Braided Tubing — Hydroponics & Irrigation Hose with Optional Clips

Measure the total run from your water source to the farthest outlet, then add 10–15% for routing around obstacles and fitting connections. As a reference: 3M (≈9.8 ft) suits compact desktop or small tent setups; 10M (≈32.8 ft) covers a standard grow tent row; 30M (≈98.4 ft) handles large greenhouse or garden irrigation runs. When in doubt, size up — the hose can be trimmed to length in the field.

PVC braided hose of this construction is generally rated for low-to-medium pressure applications, typically up to 60–80 PSI depending on wall thickness and ambient temperature. It is well-suited for gravity-fed systems, submersible pump outputs, and drip irrigation lines. For high-pressure mains supply connections, contact us to confirm suitability for your specific variant.

This tubing is suitable for sheltered outdoor use — greenhouse irrigation, shaded garden runs, and covered utility areas. Prolonged direct UV exposure can degrade standard PVC over time, causing brittleness or discoloration. For permanent outdoor installations in direct sun, routing through conduit or shaded channels is generally recommended to extend service life.

This flexible braided hose is compatible with standard barbed fittings, push-fit connectors, and hose clamps sized to match the inner diameter of the tubing. In most cases, a barbed fitting with a matching hose clamp provides the most secure, leak-free connection. Always verify the inner diameter of the variant you select against your fitting size before ordering.

The Clips variants include mounting clips that secure the hose to walls, grow tent frames, or rack uprights, keeping your installation tidy and preventing kinks from unsupported spans. If you plan to route the hose freely, zip-tie it to existing structure, or already have clips on hand, the standard (no-clips) variant is sufficient. For new builds or clean installs, the Clips variant saves a separate purchase.

This PVC braided tubing is commonly used in hydroponics nutrient delivery systems and is generally compatible with standard water-based nutrient solutions at typical grow room concentrations. For potable drinking water applications or highly concentrated chemical solutions, please contact us to confirm the specific grade and compliance of the tubing before use.

Yes. PVC braided tubing cuts cleanly with a sharp utility knife, scissors, or a dedicated tube cutter. For the cleanest cut — especially important when using push-fit connectors — a tube cutter produces a square, burr-free end. Choose the next length up from your measured requirement to allow for trimming and fitting connections at each end.