PVC Reinforced Braided Clear Hose — Flexible, Kink-Resistant Water & Oil Pipe
Dealing with a kinked garden hose, a leaking pump connection, or a cramped equipment bay where rigid pipe simply won't fit? Plumbers, aquarium hobbyists, machine builders, and DIY homeowners all run into the same problem: standard tubing collapses under suction or cracks under pressure. This PVC reinforced braided clear hose solves that with a woven polyester braid layer locked between two PVC walls, giving you flexibility without the kink.
Each listing is for a single continuous length of hose — available in 1M (≈39"), 2M (≈79"), or 3M (≈118") cuts. The inner diameter (ID) ranges from 10mm (3/8") up to 102mm (4"), with the outer diameter (OD) listed alongside in each variant (e.g., 16mm × 22mm, 25mm × 32mm). The clear PVC body lets you visually monitor flow at a glance, and the braided reinforcement layer is rated for higher working pressures than plain-wall tubing of the same diameter.
Typical applications include garden irrigation and pump discharge lines, aquarium and pond water circulation, compressed air and pneumatic tool connections, and light-duty oil transfer in workshop machinery. The transparent wall makes it especially useful anywhere you need to confirm flow without cutting into the line.
🔗
Compatibility: Fits standard metric barb fittings matching the listed ID. Secure with worm-drive hose clamps or crimp ferrules. Suitable for water, light oil, air, and non-aggressive fluids. Not recommended for gasoline, diesel, or strong solvents.
⚠️
Size note: Order by ID (inner diameter) to match your fitting barb. The OD is the outside measurement used for clamp sizing. Both are shown in each variant name — e.g., "16mm × 22mm" = ID 16mm, OD 22mm (5/8" bore).
✅ Key Features of These PVC Reinforced Braided Clear Hoses
-
🧵Braided Reinforcement Layer — A woven polyester mesh between the inner and outer PVC walls resists kinking and collapse under suction, making this hose reliable for pump inlet lines and vacuum applications.
-
👁️Crystal-Clear Transparency — The clear PVC wall lets you monitor fluid flow, detect air locks, and spot contamination without disconnecting the line — ideal for aquarium water circulation and food-processing rinse lines.
-
📐Wide Size Range — Available from 10mm (3/8") ID up to 102mm (4") ID, covering everything from small aquarium return pumps to large industrial water transfer hoses.
-
✂️Cut-to-Length Flexibility — Sold in 1M, 2M, and 3M sections that cut cleanly with a utility knife, so you get exactly the run you need without waste — useful for tight equipment bays and custom irrigation layouts.
-
🔧Push-On Barb Compatibility — The flexible PVC wall stretches slightly over standard metric barb fittings for a secure push-on connection; pair with a worm-drive clamp for a leak-free seal on pressurized lines.
-
🌡️Broad Temperature Range — Generally rated for use from approximately 0°C to 60°C (32°F–140°F), suitable for cold water supply, warm coolant loops, and heated fluid transfer in light industrial settings.
📐 Technical Specifications — PVC Reinforced Braided Hose
| Material |
Clear PVC (inner & outer wall) + polyester braid reinforcement |
| Inner Diameter (ID) |
10mm (3/8") — 102mm (4") — see variant options |
| Outer Diameter (OD) |
16mm — 116mm — see variant options (listed as ID × OD) |
| Available Lengths |
1M (≈39"), 2M (≈79"), 3M (≈118") |
| Wall Construction |
Dual-layer PVC with woven polyester braid |
| Working Pressure |
Typically 4–10 bar depending on diameter (contact us to confirm for your size) |
| Temperature Range |
Generally 0°C to 60°C (32°F to 140°F) |
| Colour |
Clear / transparent |
| Fluid Compatibility |
Water, light oil, air, non-aggressive fluids |
| Fitting Type |
Metric barb fittings (ID-matched); hose clamp recommended |
| Quantity per Order |
1 continuous length (1M, 2M, or 3M as selected) |
❓ Frequently Asked Questions
How do I choose the right hose size?
Match the ID (inner diameter) to your fitting or barb size. For example, a 16mm (5/8") ID hose fits a 16mm barb. The OD (outer diameter) determines how the hose fits inside clamps or sleeves. Always measure your existing fitting before ordering. Each variant is listed as ID × OD — e.g., "25mm × 32mm" means a 25mm bore with a 32mm outside diameter.
What pressure can this reinforced PVC hose handle?
The braided reinforcement layer generally increases burst resistance compared to plain PVC tubing. Working pressure typically ranges from 4–10 bar depending on the diameter and wall thickness — smaller diameters generally handle higher pressures. Confirm your system's requirements before installation, and contact us if you need pressure ratings for a specific size.
Can this hose be used outdoors or in UV-exposed environments?
Standard clear PVC is not UV-stabilized and may yellow or become brittle with prolonged direct sunlight exposure. For outdoor or UV-exposed runs, we generally recommend sheathing the hose in conduit or UV-resistant sleeving. Short-term outdoor use in shaded areas is typically acceptable.
Is this hose compatible with oil and fuel lines?
This hose is generally suitable for light oil transfer and hydraulic fluid at low pressure. It is not recommended for petroleum-based fuels (gasoline, diesel) or aggressive solvents, as these can degrade PVC over time. Always verify chemical compatibility with your specific fluid before use.
What fittings are compatible with this hose?
This hose is designed to work with standard metric barb fittings that match the ID. Worm-drive hose clamps or crimp ferrules are recommended to secure connections under pressure. Confirm the barb OD matches the hose ID for a leak-free seal — a barb that is 1–2mm larger than the ID is typically ideal for a tight grip.
What is the difference between ID and OD, and which should I order by?
ID (inner diameter) is the bore — this is what your fitting slides into, and it's the measurement you should order by. OD (outer diameter) is the outside measurement, used for selecting clamps and sleeves. Both are shown in each variant name: e.g., "16mm × 22mm" = ID 16mm, OD 22mm.
Can I cut this hose to a custom length?
Yes. The hose is sold in 1M, 2M, and 3M lengths and can be cut to your required length using a sharp utility knife or rotary pipe cutter. A clean, square cut ensures the best seal with barb fittings and prevents leaks at the connection point.
🛒 Select your size (ID × OD) and length above, then add to cart — ships from our US warehouse.
