{"product_id":"upvc-slip-3-way-tee-connector-grey-pvc-fittings-20mm-110mm","title":"Tee Connectors Grey UPVC Fittings Φ20mm Φ25mm ~ Φ110mm UPVC Slip 3 Way Tee","description":"\u003cdiv class=\"hdiy-desc\"\u003e\n\n  \u003cdiv class=\"hdiy-overview\"\u003e\n    \u003ch2\u003eUPVC Slip 3-Way Tee Connectors — Reliable Branch Connections for Cold Water \u0026amp; Drainage Systems\u003c\/h2\u003e\n    \u003cp\u003eWhen a plumbing run needs to branch off cleanly without leaks or weak joints, choosing the wrong tee fitting costs time and money. DIYers, plumbers, and irrigation installers who work with rigid pipe systems need a tee connector that bonds securely, resists corrosion, and holds pressure over the long term. These grey UPVC slip 3-way tee connectors are engineered for exactly that job.\u003c\/p\u003e\n    \u003cp\u003eEach fitting is manufactured from unplasticized polyvinyl chloride (UPVC) in a neutral grey finish. The slip (solvent-weld) socket ends accept standard metric pipe in interior diameters ranging from 20mm (~¾ in) up to 110mm (~4⅓ in), covering the most common residential and light-commercial pipe sizes. Wall thickness and socket depth are sized to meet typical Schedule 40 \/ Class D equivalent standards, ensuring a full-depth bond when used with compatible solvent cement.\u003c\/p\u003e\n    \u003cp\u003eTypical applications include cold-water supply branch lines, garden and agricultural drip-irrigation manifolds, rainwater harvesting distribution headers, and above-ground or below-ground drainage laterals. Long-tail use cases such as \"UPVC tee fitting for irrigation system\", \"grey PVC 3-way connector for cold water pipe\", and \"solvent-weld tee 50mm drainage\" are all well served by this range.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-compat\"\u003e\n    \u003cspan class=\"hdiy-compat-icon\"\u003e🔗\u003c\/span\u003e\n    \u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for standard metric UPVC \/ PVC-U pipe (20mm–110mm OD). Use with solvent cement rated for UPVC. Not suitable for hot-water supply lines or compressed-air systems.\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-features\"\u003e\n    \u003ch2\u003e✅ Key Features of These UPVC Slip 3-Way Tee Connectors\u003c\/h2\u003e\n    \u003cul class=\"hdiy-list\"\u003e\n      \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔩\u003c\/span\u003e\u003cstrong\u003eFull-Range Size Selection\u003c\/strong\u003e — Available in nine interior diameters from 20mm to 110mm, covering the most common metric pipe sizes used in residential and light-commercial plumbing and irrigation.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🛡️\u003c\/span\u003e\u003cstrong\u003eCorrosion-Resistant UPVC Body\u003c\/strong\u003e — Unplasticized PVC does not rust, pit, or degrade from soil acids, fertilizers, or chlorinated water, making these tees suitable for buried and exposed installations alike.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e💧\u003c\/span\u003e\u003cstrong\u003eSolvent-Weld Slip Sockets\u003c\/strong\u003e — All three ports use slip (plain socket) ends for a solvent-cement bond that creates a monolithic, leak-free joint rated for typical cold-water working pressures.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e⚖️\u003c\/span\u003e\u003cstrong\u003eLightweight Yet Rigid\u003c\/strong\u003e — UPVC's strength-to-weight ratio keeps handling and installation effort low without sacrificing the structural rigidity needed to resist soil loads and water hammer.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🌡️\u003c\/span\u003e\u003cstrong\u003eRated for Cold-Water Service\u003c\/strong\u003e — Optimized for cold-water supply, drainage, and irrigation applications where operating temperatures remain below approximately 60 °C (140 °F).\u003c\/li\u003e\n      \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📦\u003c\/span\u003e\u003cstrong\u003eSingle or Twin-Pack Options\u003c\/strong\u003e — Choose Qty 1 for a single fitting or Qty 2 for a discounted twin pack, ideal for projects requiring multiple branch points on the same run.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-table-wrap\"\u003e\n    \u003ch2\u003e📐 Technical Specifications — UPVC Slip 3-Way Tee Fittings\u003c\/h2\u003e\n    \u003ctable\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eUPVC (Unplasticized Polyvinyl Chloride)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eColor \/ Finish\u003c\/th\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eConnection Type\u003c\/th\u003e\n\u003ctd\u003eSlip (Solvent-Weld Socket)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003e3-Way Tee (Equal)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eInterior Diameter Range\u003c\/th\u003e\n\u003ctd\u003e20mm – 110mm (approx. ¾ in – 4⅓ in)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eAvailable Sizes\u003c\/th\u003e\n\u003ctd\u003e20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 75mm, 90mm, 110mm\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eWall Thickness\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003ePressure Rating\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eTemperature Range\u003c\/th\u003e\n\u003ctd\u003e0 °C – 60 °C (32 °F – 140 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCompatible Pipe Standard\u003c\/th\u003e\n\u003ctd\u003eMetric UPVC \/ PVC-U pipe (DIN \/ ISO)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCement Required\u003c\/th\u003e\n\u003ctd\u003eUPVC solvent cement (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003ePack Quantity\u003c\/th\u003e\n\u003ctd\u003e1 or 2 pieces (select Qty above)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-faq\"\u003e\n    \u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I choose the right size tee connector for my pipe?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eMatch the interior diameter (ID) of the fitting to the nominal outer diameter of your UPVC pipe. For example, if your pipe is marked DN25 or 25mm OD, select the 25mm variant. When in doubt, measure the pipe's outer diameter with calipers and compare to the size chart — the slip socket is sized to accept the pipe's OD directly.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan these tee fittings handle hot water?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eNo. UPVC is rated for cold-water service only, typically up to 60 °C (140 °F) under reduced pressure. For hot-water supply lines, use CPVC or copper fittings instead. These tees are ideal for cold-water supply, irrigation, rainwater, and drainage applications.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eAre these fittings suitable for underground or buried installations?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eYes. UPVC is chemically inert and does not corrode in soil environments, including acidic soils and areas with fertilizer runoff. Ensure the trench is free of sharp stones that could abrade the pipe, and follow local codes for burial depth and bedding material.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat solvent cement should I use, and how do I make a proper joint?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eUse a UPVC-rated solvent cement (not ABS cement). Clean and dry both the pipe end and socket, apply a thin, even coat of cement to both surfaces, push the pipe fully into the socket with a slight twist, and hold for 30 seconds. Allow the joint to cure for at least 15 minutes before handling and 24 hours before pressure testing.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow strong is the solvent-weld joint compared to a threaded connection?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eA properly made solvent-weld joint chemically fuses the pipe and fitting into a single piece, typically achieving joint strength equal to or exceeding the pipe wall itself. This makes it more resistant to pull-out and vibration than threaded connections, which rely on mechanical engagement alone.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eAre these fittings compatible with irrigation systems and garden water lines?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eYes. These UPVC tee connectors are widely used in drip-irrigation manifolds, garden water distribution headers, and agricultural supply lines. They are compatible with standard metric UPVC pipe used in most residential and light-commercial irrigation setups. Confirm your pipe's nominal diameter before ordering.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan I use these for a drainage or waste-water application?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eThese fittings are suitable for above-ground and below-ground drainage of non-pressurized waste water (gravity drainage). For pressurized drainage or sewage systems, verify the pressure rating of the specific size variant you need and consult local plumbing codes.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-cta\"\u003e\n    🛒 Select your \u003cstrong\u003ediameter and quantity\u003c\/strong\u003e above, then add to cart.\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I choose the right size tee connector for my pipe?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Match the interior diameter (ID) of the fitting to the nominal outer diameter of your UPVC pipe. For example, if your pipe is marked DN25 or 25mm OD, select the 25mm variant. When in doubt, measure the pipe's outer diameter with calipers and compare to the size chart — the slip socket is sized to accept the pipe's OD directly.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can these tee fittings handle hot water?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"No. UPVC is rated for cold-water service only, typically up to 60 °C (140 °F) under reduced pressure. For hot-water supply lines, use CPVC or copper fittings instead. These tees are ideal for cold-water supply, irrigation, rainwater, and drainage applications.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Are these fittings suitable for underground or buried installations?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. UPVC is chemically inert and does not corrode in soil environments, including acidic soils and areas with fertilizer runoff. Ensure the trench is free of sharp stones that could abrade the pipe, and follow local codes for burial depth and bedding material.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What solvent cement should I use, and how do I make a proper joint?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Use a UPVC-rated solvent cement (not ABS cement). Clean and dry both the pipe end and socket, apply a thin, even coat of cement to both surfaces, push the pipe fully into the socket with a slight twist, and hold for 30 seconds. Allow the joint to cure for at least 15 minutes before handling and 24 hours before pressure testing.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How strong is the solvent-weld joint compared to a threaded connection?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"A properly made solvent-weld joint chemically fuses the pipe and fitting into a single piece, typically achieving joint strength equal to or exceeding the pipe wall itself. This makes it more resistant to pull-out and vibration than threaded connections, which rely on mechanical engagement alone.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Are these fittings compatible with irrigation systems and garden water lines?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. These UPVC tee connectors are widely used in drip-irrigation manifolds, garden water distribution headers, and agricultural supply lines. They are compatible with standard metric UPVC pipe used in most residential and light-commercial irrigation setups. Confirm your pipe's nominal diameter before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I use these for a drainage or waste-water application?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"These fittings are suitable for above-ground and below-ground drainage of non-pressurized waste water (gravity drainage). For pressurized drainage or sewage systems, verify the pressure rating of the specific size variant you need and consult local plumbing codes.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"HomeDIYer","offers":[{"title":"20mm \/ 1","offer_id":52332256690450,"sku":"WXB019956x1","price":7.79,"currency_code":"USD","in_stock":true},{"title":"25mm \/ 1","offer_id":52332256723218,"sku":"WXB019957x1","price":11.53,"currency_code":"USD","in_stock":true},{"title":"32mm \/ 1","offer_id":52332256755986,"sku":"WXB019958x1","price":12.92,"currency_code":"USD","in_stock":true},{"title":"40mm \/ 1","offer_id":52332256788754,"sku":"WXB019959x1","price":18.9,"currency_code":"USD","in_stock":true},{"title":"50mm \/ 1","offer_id":52332256821522,"sku":"WXB019960x1","price":32.07,"currency_code":"USD","in_stock":true},{"title":"63mm \/ 1","offer_id":52332256854290,"sku":"WXB019961x1","price":49.37,"currency_code":"USD","in_stock":true},{"title":"75mm \/ 1","offer_id":52332256887058,"sku":"WXB019962x1","price":76.13,"currency_code":"USD","in_stock":true},{"title":"90mm \/ 1","offer_id":52332256919826,"sku":"WXB019963x1","price":109.75,"currency_code":"USD","in_stock":true},{"title":"110mm \/ 1","offer_id":52332256952594,"sku":"WXB019964x1","price":156.92,"currency_code":"USD","in_stock":true},{"title":"20mm \/ 2","offer_id":52332256985362,"sku":"WXB019956x2","price":13.23,"currency_code":"USD","in_stock":true},{"title":"25mm \/ 2","offer_id":52332257018130,"sku":"WXB019957x2","price":16.46,"currency_code":"USD","in_stock":true},{"title":"32mm \/ 2","offer_id":52332257050898,"sku":"WXB019958x2","price":23.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/Main-01_b1defd17-4a1e-48be-8ac5-ae7fe626555e.jpg?v=1782201765","url":"https:\/\/homediyer.com\/de\/products\/upvc-slip-3-way-tee-connector-grey-pvc-fittings-20mm-110mm","provider":"HomeDIYer","version":"1.0","type":"link"}