{"product_id":"0-5-mod-spur-gear-20-22-24-26teeth-45-steel-pinion-gear-motor-transmission-gears","title":"0.5 Mod Spur Gear 20\/22\/24\/26Teeth 45#Steel Pinion Gear Motor Transmission Gears","description":"\u003cdiv class=\"hdiy-desc\"\u003e\n\n  \u003cdiv class=\"hdiy-overview\"\u003e\n    \u003ch2\u003e0.5 Mod Spur Gear for Motor Transmission — Precision 45# Steel Pinion Gears\u003c\/h2\u003e\n    \u003cp\u003eWhen your motor drive, robotic joint, or RC drivetrain demands tight mesh tolerances and consistent torque transfer, undersized or poorly machined gears become the weakest link. These 0.5 module spur gears are engineered for hobbyists, makers, and small-machine builders who need reliable, repeatable power transmission in compact gear trains.\u003c\/p\u003e\n    \u003cp\u003eEach gear is machined from 45# medium-carbon steel, offering a balance of machinability and wear resistance suited to moderate-load applications. The range covers 20, 22, 24, and 26 teeth at 0.5 module, with bore options of 4 mm, 5 mm, 6 mm, and 6.35 mm (1\/4 in). Outer diameters span approximately 11–14 mm (0.43–0.55 in) depending on tooth count, keeping the footprint minimal for space-constrained assemblies.\u003c\/p\u003e\n    \u003cp\u003eTypical use cases include DC motor pinion drives in 3D printer extruder gearboxes, small servo reduction stages in robotic arms, and speed-reduction gear pairs in DIY CNC axis drives — all scenarios where a 0.5 mod spur gear with a precise bore fit is critical to backlash control and long service life.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-compat\"\u003e\n    \u003cspan class=\"hdiy-compat-icon\"\u003e⚙️\u003c\/span\u003e\n    Compatible with any mating 0.5 module spur or pinion gear. Bore sizes 4 mm, 5 mm, 6 mm, and 6.35 mm suit standard motor shafts and hobby servo output shafts. Select your Modulus \u0026amp; Teeth count and Hole Size above to confirm fit.\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-features\"\u003e\n    \u003ch2\u003e✅ Key Features of These 0.5 Mod Spur Gears\u003c\/h2\u003e\n    \u003cul class=\"hdiy-list\"\u003e\n      \u003cli\u003e\n        \u003cspan class=\"hdiy-icon\"\u003e🔩\u003c\/span\u003e\n        \u003cstrong\u003e45# Steel Construction\u003c\/strong\u003e — Medium-carbon steel provides solid wear resistance and machinability, suitable for moderate-load motor transmission applications.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cspan class=\"hdiy-icon\"\u003e📐\u003c\/span\u003e\n        \u003cstrong\u003e0.5 Module Standard\u003c\/strong\u003e — Conforms to the metric module system; meshes correctly with any 0.5 mod mating gear for predictable gear ratios and smooth engagement.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cspan class=\"hdiy-icon\"\u003e🎯\u003c\/span\u003e\n        \u003cstrong\u003eFour Tooth Counts: 20 \/ 22 \/ 24 \/ 26T\u003c\/strong\u003e — Enables flexible ratio selection within a single gear family; mix and match to achieve your target reduction or speed-up ratio.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cspan class=\"hdiy-icon\"\u003e🔧\u003c\/span\u003e\n        \u003cstrong\u003eMultiple Bore Options (4–6.35 mm)\u003c\/strong\u003e — Fits common DC motor shafts and hobby servo shafts; 6.35 mm (1\/4 in) option accommodates imperial shaft standards.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cspan class=\"hdiy-icon\"\u003e📦\u003c\/span\u003e\n        \u003cstrong\u003eFlexible Pack Quantities (1–20 Pcs)\u003c\/strong\u003e — Order a single gear for prototyping or up to 20 pieces for production runs and spare-parts inventory.\n      \u003c\/li\u003e\n      \u003cli\u003e\n        \u003cspan class=\"hdiy-icon\"\u003e🏭\u003c\/span\u003e\n        \u003cstrong\u003eBroad Application Range\u003c\/strong\u003e — Used in 3D printer extruder drives, robotic arm reduction stages, DIY CNC axis drives, RC vehicle transmissions, and small automation mechanisms.\n      \u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-table-wrap\"\u003e\n    \u003ch2\u003e📐 Technical Specifications — 0.5 Mod Spur Gear\u003c\/h2\u003e\n    \u003ctable\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003cth\u003eModule\u003c\/th\u003e\n\u003ctd\u003e0.5\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eTooth Count Options\u003c\/th\u003e\n\u003ctd\u003e20T \/ 22T \/ 24T \/ 26T\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003ePressure Angle\u003c\/th\u003e\n\u003ctd\u003e20° (standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eBore (Hole) Size\u003c\/th\u003e\n\u003ctd\u003e4 mm \/ 5 mm \/ 6 mm \/ 6.35 mm (1\/4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003ePitch Diameter (approx.)\u003c\/th\u003e\n\u003ctd\u003e10 mm \/ 11 mm \/ 12 mm \/ 13 mm (by tooth count)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eOuter Diameter (approx.)\u003c\/th\u003e\n\u003ctd\u003e11 mm \/ 12 mm \/ 13 mm \/ 14 mm (by tooth count)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eFace Width\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e45# Medium-Carbon Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eSurface Finish\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eHub Style\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003ePack Quantity\u003c\/th\u003e\n\u003ctd\u003e1 \/ 2 \/ 5 \/ 10 \/ 20 Pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eGear Type\u003c\/th\u003e\n\u003ctd\u003eSpur (straight tooth)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-faq\"\u003e\n    \u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I choose the right tooth count for my application?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eThe gear ratio is determined by dividing the driven gear tooth count by the driving gear tooth count. For example, pairing a 20T pinion with a 26T gear gives a reduction ratio of approximately 1.3:1. Choose a higher tooth count on the driven gear for speed reduction and torque multiplication, or a lower count for speed increase. All four options (20T, 22T, 24T, 26T) share the same 0.5 module, so they mesh with each other and with any other 0.5 mod gear.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhich bore size should I select for my motor shaft?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eMatch the bore to your motor or servo shaft diameter. Common DC hobby motors use 3–6 mm shafts — select 4 mm, 5 mm, or 6 mm accordingly. The 6.35 mm option is equivalent to 1\/4 inch and suits motors with imperial shaft standards common in North American hobby applications. If your shaft is slightly undersized, a set screw or shaft collar can compensate; if oversized, the bore cannot be reduced without machining.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eAre these gears strong enough for my load?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003e45# steel offers moderate tensile strength (typically 600–800 MPa depending on heat treatment) and is well-suited for light-to-medium duty motor transmission tasks such as 3D printer extruders, small robotic joints, and RC drivetrains. For heavy industrial loads or continuous high-torque applications, consider gears made from alloy steel or with surface hardening. If in doubt, calculate the tangential load against the gear's face width and module to verify adequacy.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWill these gears corrode or rust over time?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003e45# carbon steel is susceptible to surface oxidation in humid or wet environments. For indoor, dry-environment use (typical of electronics enclosures, desktop robots, and 3D printers), bare steel is generally acceptable with light lubrication. For outdoor or high-humidity applications, apply a thin coat of grease or consider a corrosion-inhibiting lubricant. If corrosion resistance is a primary requirement, look for stainless steel or brass gear alternatives.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan I mesh gears of different tooth counts from this listing together?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eYes. All gears in this listing share the same 0.5 module and 20° pressure angle, which means any combination of 20T, 22T, 24T, and 26T gears will mesh correctly with each other and with any other 0.5 mod external spur gear. The center distance between two meshing gears equals (T1 + T2) × module \/ 2. For example, a 20T and 26T pair requires a center distance of (20 + 26) × 0.5 \/ 2 = 11.5 mm.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow many pieces should I order — single or multi-pack?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eFor prototyping or one-off builds, the 1 Pcs option lets you validate fit and function before committing to more. For production runs, educational kits, or keeping spares on hand, the 5, 10, or 20 Pcs packs offer better per-unit value. If you are building a gear train that requires multiple identical gears (e.g., an idler stage), ordering a multi-pack in a single transaction ensures all gears come from the same production batch for consistent tolerances.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat lubrication is recommended for these spur gears?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eA light machine oil or white lithium grease applied to the tooth flanks is sufficient for most hobby and light-duty applications. Avoid heavy greases that can attract dust and debris in open-gear configurations. For enclosed gearboxes, a gear oil with an appropriate viscosity grade (ISO VG 68–150) works well. Re-lubricate periodically based on run time and operating conditions.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-cta\"\u003e\n    🛒 Select your Modulus \u0026amp; Teeth count, Hole Size, and Quantity above, then add to cart.\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I choose the right tooth count for my application?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The gear ratio is determined by dividing the driven gear tooth count by the driving gear tooth count. All four options (20T, 22T, 24T, 26T) share the same 0.5 module, so they mesh with each other and with any other 0.5 mod gear.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Which bore size should I select for my motor shaft?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Match the bore to your motor or servo shaft diameter. Options are 4 mm, 5 mm, 6 mm, and 6.35 mm (1\/4 inch). Select the size that matches your shaft diameter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Are these gears strong enough for my load?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"45# steel offers moderate tensile strength suitable for light-to-medium duty motor transmission tasks such as 3D printer extruders, small robotic joints, and RC drivetrains.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Will these gears corrode or rust over time?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"45# carbon steel is susceptible to surface oxidation in humid environments. For dry indoor use, light lubrication is generally sufficient. For outdoor use, apply corrosion-inhibiting grease.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I mesh gears of different tooth counts from this listing together?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. All gears share the same 0.5 module and 20° pressure angle, so any combination of 20T, 22T, 24T, and 26T gears will mesh correctly with each other.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How many pieces should I order?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"For prototyping, the 1 Pcs option lets you validate fit before committing. For production runs or spare parts, the 5, 10, or 20 Pcs packs offer better per-unit value.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What lubrication is recommended for these spur gears?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"A light machine oil or white lithium grease applied to the tooth flanks is sufficient for most hobby and light-duty applications. Re-lubricate periodically based on run time and operating conditions.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"HomeDIYer","offers":[{"title":"0.5Mod 20Teeth \/ 5mm \/ 1 Pcs","offer_id":52442751041810,"sku":"GLFBQLWGLBZSJ057278x1","price":10.46,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 20Teeth \/ 5mm \/ 2 Pcs","offer_id":52442751074578,"sku":"GLFBQLWGLBZSJ057278x2","price":15.03,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 20Teeth \/ 5mm \/ 5 Pcs","offer_id":52442751107346,"sku":"GLFBQLWGLBZSJ057278x5","price":34.67,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 20Teeth \/ 5mm \/ 10 Pcs","offer_id":52442751140114,"sku":"GLFBQLWGLBZSJ057278x10","price":67.31,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 20Teeth \/ 5mm \/ 20 Pcs","offer_id":52442751172882,"sku":"GLFBQLWGLBZSJ057278x20","price":132.45,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 20Teeth \/ 6mm \/ 1 Pcs","offer_id":52442751205650,"sku":"GLFBQLWGLBZSJ057279x1","price":10.46,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 20Teeth \/ 6mm \/ 2 Pcs","offer_id":52442751238418,"sku":"GLFBQLWGLBZSJ057279x2","price":15.03,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 20Teeth \/ 6mm \/ 5 Pcs","offer_id":52442751271186,"sku":"GLFBQLWGLBZSJ057279x5","price":34.67,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 20Teeth \/ 6mm \/ 10 Pcs","offer_id":52442751303954,"sku":"GLFBQLWGLBZSJ057279x10","price":67.31,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 20Teeth \/ 6mm \/ 20 Pcs","offer_id":52442751336722,"sku":"GLFBQLWGLBZSJ057279x20","price":132.45,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 20Teeth \/ 6.35mm \/ 1 Pcs","offer_id":52442751369490,"sku":"GLFBQLWGLBZSJ057280x1","price":10.46,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 20Teeth \/ 6.35mm \/ 2 Pcs","offer_id":52442751402258,"sku":"GLFBQLWGLBZSJ057280x2","price":15.03,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 20Teeth \/ 6.35mm \/ 5 Pcs","offer_id":52442751435026,"sku":"GLFBQLWGLBZSJ057280x5","price":34.67,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 20Teeth \/ 6.35mm \/ 10 Pcs","offer_id":52442751467794,"sku":"GLFBQLWGLBZSJ057280x10","price":67.31,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 20Teeth \/ 6.35mm \/ 20 Pcs","offer_id":52442751500562,"sku":"GLFBQLWGLBZSJ057280x20","price":132.45,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 20Teeth \/ 4mm \/ 1 Pcs","offer_id":52442751533330,"sku":"GLFBQLWGLCDPJ00030x1","price":10.46,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 20Teeth \/ 4mm \/ 2 Pcs","offer_id":52442751566098,"sku":"GLFBQLWGLCDPJ00030x2","price":15.03,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 20Teeth \/ 4mm \/ 5 Pcs","offer_id":52442751598866,"sku":"GLFBQLWGLCDPJ00030x5","price":34.67,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 20Teeth \/ 4mm \/ 10 Pcs","offer_id":52442751631634,"sku":"GLFBQLWGLCDPJ00030x10","price":67.31,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 20Teeth \/ 4mm \/ 20 Pcs","offer_id":52442751664402,"sku":"GLFBQLWGLCDPJ00030x20","price":132.45,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 22Teeth \/ 4mm \/ 1 Pcs","offer_id":52442751697170,"sku":"GLFBQLWGLCDPJ00031x1","price":10.46,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 22Teeth \/ 4mm \/ 2 Pcs","offer_id":52442751729938,"sku":"GLFBQLWGLCDPJ00031x2","price":15.03,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 22Teeth \/ 4mm \/ 5 Pcs","offer_id":52442751762706,"sku":"GLFBQLWGLCDPJ00031x5","price":34.67,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 22Teeth \/ 4mm \/ 10 Pcs","offer_id":52442751795474,"sku":"GLFBQLWGLCDPJ00031x10","price":67.31,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 22Teeth \/ 4mm \/ 20 Pcs","offer_id":52442751828242,"sku":"GLFBQLWGLCDPJ00031x20","price":132.45,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 22Teeth \/ 5mm \/ 1 Pcs","offer_id":52442751861010,"sku":"GLFBQLWGLCDPJ00032x1","price":10.46,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 22Teeth \/ 5mm \/ 2 Pcs","offer_id":52442751893778,"sku":"GLFBQLWGLCDPJ00032x2","price":15.03,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 22Teeth \/ 5mm \/ 5 Pcs","offer_id":52442751926546,"sku":"GLFBQLWGLCDPJ00032x5","price":34.67,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 22Teeth \/ 5mm \/ 10 Pcs","offer_id":52442751959314,"sku":"GLFBQLWGLCDPJ00032x10","price":67.31,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 22Teeth \/ 5mm \/ 20 Pcs","offer_id":52442751992082,"sku":"GLFBQLWGLCDPJ00032x20","price":132.45,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 22Teeth \/ 6mm \/ 1 Pcs","offer_id":52442752024850,"sku":"GLFBQLWGLCDPJ00033x1","price":10.46,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 22Teeth \/ 6mm \/ 2 Pcs","offer_id":52442752057618,"sku":"GLFBQLWGLCDPJ00033x2","price":15.03,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 22Teeth \/ 6mm \/ 5 Pcs","offer_id":52442752090386,"sku":"GLFBQLWGLCDPJ00033x5","price":34.67,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 22Teeth \/ 6mm \/ 10 Pcs","offer_id":52442752123154,"sku":"GLFBQLWGLCDPJ00033x10","price":67.31,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 22Teeth \/ 6mm \/ 20 Pcs","offer_id":52442752155922,"sku":"GLFBQLWGLCDPJ00033x20","price":132.45,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 24Teeth \/ 4mm \/ 1 Pcs","offer_id":52442752188690,"sku":"GLFBQLWGLCDPJ00034x1","price":10.59,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 24Teeth \/ 4mm \/ 2 Pcs","offer_id":52442752221458,"sku":"GLFBQLWGLCDPJ00034x2","price":15.9,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 24Teeth \/ 4mm \/ 5 Pcs","offer_id":52442752254226,"sku":"GLFBQLWGLCDPJ00034x5","price":36.52,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 24Teeth \/ 4mm \/ 10 Pcs","offer_id":52442752286994,"sku":"GLFBQLWGLCDPJ00034x10","price":70.92,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 24Teeth \/ 4mm \/ 20 Pcs","offer_id":52442752319762,"sku":"GLFBQLWGLCDPJ00034x20","price":147.36,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 24Teeth \/ 5mm \/ 1 Pcs","offer_id":52442752352530,"sku":"GLFBQLWGLCDPJ00035x1","price":10.59,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 24Teeth \/ 5mm \/ 2 Pcs","offer_id":52442752385298,"sku":"GLFBQLWGLCDPJ00035x2","price":15.9,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 24Teeth \/ 5mm \/ 5 Pcs","offer_id":52442752418066,"sku":"GLFBQLWGLCDPJ00035x5","price":36.52,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 24Teeth \/ 5mm \/ 10 Pcs","offer_id":52442752450834,"sku":"GLFBQLWGLCDPJ00035x10","price":70.92,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 24Teeth \/ 5mm \/ 20 Pcs","offer_id":52442752483602,"sku":"GLFBQLWGLCDPJ00035x20","price":147.36,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 24Teeth \/ 6mm \/ 1 Pcs","offer_id":52442752516370,"sku":"GLFBQLWGLCDPJ00036x1","price":10.59,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 24Teeth \/ 6mm \/ 2 Pcs","offer_id":52442752549138,"sku":"GLFBQLWGLCDPJ00036x2","price":15.9,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 24Teeth \/ 6mm \/ 5 Pcs","offer_id":52442752581906,"sku":"GLFBQLWGLCDPJ00036x5","price":36.52,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 24Teeth \/ 6mm \/ 10 Pcs","offer_id":52442752614674,"sku":"GLFBQLWGLCDPJ00036x10","price":70.92,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 24Teeth \/ 6mm \/ 20 Pcs","offer_id":52442752647442,"sku":"GLFBQLWGLCDPJ00036x20","price":147.36,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 26Teeth \/ 6mm \/ 1 Pcs","offer_id":52442752680210,"sku":"GLFBQLWGFCD03392x1","price":10.87,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 26Teeth \/ 6mm \/ 2 Pcs","offer_id":52442752712978,"sku":"GLFBQLWGFCD03392x2","price":17.48,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 26Teeth \/ 6mm \/ 5 Pcs","offer_id":52442752745746,"sku":"GLFBQLWGFCD03392x5","price":40.46,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 26Teeth \/ 6mm \/ 10 Pcs","offer_id":52442752778514,"sku":"GLFBQLWGFCD03392x10","price":78.73,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 26Teeth \/ 6mm \/ 20 Pcs","offer_id":52442752811282,"sku":"GLFBQLWGFCD03392x20","price":164.63,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 26Teeth \/ 6.35mm \/ 1 Pcs","offer_id":52442752844050,"sku":"GLFBQLWGFCD03393x1","price":10.87,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 26Teeth \/ 6.35mm \/ 2 Pcs","offer_id":52442752876818,"sku":"GLFBQLWGFCD03393x2","price":18.07,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 26Teeth \/ 6.35mm \/ 5 Pcs","offer_id":52442752909586,"sku":"GLFBQLWGFCD03393x5","price":41.87,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 26Teeth \/ 6.35mm \/ 10 Pcs","offer_id":52442752942354,"sku":"GLFBQLWGFCD03393x10","price":81.72,"currency_code":"USD","in_stock":true},{"title":"0.5Mod 26Teeth \/ 6.35mm \/ 20 Pcs","offer_id":52442752975122,"sku":"GLFBQLWGFCD03393x20","price":171.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/Main-04_1a73ff72-6e98-4dd4-a126-2b6ec6f6a860.jpg?v=1783589932","url":"https:\/\/homediyer.com\/products\/0-5-mod-spur-gear-20-22-24-26teeth-45-steel-pinion-gear-motor-transmission-gears","provider":"HomeDIYer","version":"1.0","type":"link"}