{"product_id":"1-5-module-steel-bevel-helical-motor-gear-15-40-tooth","title":"1.5 Module Steel Umbrella Tooth Bevel Gear Helical Motor Gear 15-40 Tooth","description":"\u003cdiv class=\"hdiy-desc\"\u003e\n\n\u003cdiv class=\"hdiy-overview\"\u003e\n\u003ch2\u003e1.5 Module Steel Bevel Helical Gear — Precision Motion Control for CNC \u0026amp; Robotics\u003c\/h2\u003e\n\u003cp\u003eWhen your CNC router, robotic arm, or automation rig demands reliable torque transfer at an angle, a poorly matched gear becomes the weakest link in the entire drivetrain. Engineers and makers who need consistent, low-backlash bevel gear performance across a wide tooth-count range will find this 1.5 module steel helical bevel gear series purpose-built for the task.\u003c\/p\u003e\n\u003cp\u003eEach gear is machined from carbon steel and features a 1.5M (module 1.5) tooth profile with an umbrella-tooth bevel geometry. The available tooth counts span 15T through 40T, with corresponding pitch circle diameters ranging from approximately 24.3 mm (~0.96 in) for the 15T up to 61.8 mm (~2.43 in) for the 40T. Bore diameter and keyway dimensions vary by tooth count — see variant options for exact bore specs.\u003c\/p\u003e\n\u003cp\u003eTypical use cases include 90° shaft-angle drives in desktop CNC machines, stepper-motor gearboxes for 3D printer Z-axis assemblies, and right-angle power transmission in small conveyor or pick-and-place automation systems. The helical tooth form reduces noise and distributes load more evenly than straight-cut bevel gears, making it a reliable choice for continuous-duty motor gear applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"hdiy-compat\"\u003e\n\u003cspan class=\"hdiy-compat-icon\"\u003e⚙️\u003c\/span\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for 1.5 module bevel gear pairs. Mate with a corresponding 1.5M bevel gear of the same tooth count for a 1:1 ratio, or mix tooth counts for speed reduction. Verify bore diameter against your shaft size before ordering.\n\u003c\/div\u003e\n\n\u003ch2\u003e✅ Key Features of These 1.5M Steel Bevel Helical Motor Gears\u003c\/h2\u003e\n\u003cdiv class=\"hdiy-features\"\u003e\n\n\u003cdiv\u003e\n\u003cdiv class=\"hdiy-icon\"\u003e🔩\u003c\/div\u003e\n\u003cstrong\u003eModule 1.5 Bevel Tooth Profile\u003c\/strong\u003e\n\u003cp\u003eStandardized 1.5M pitch ensures interchangeability with other module-1.5 bevel gears across common automation and CNC platforms.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv class=\"hdiy-icon\"\u003e⚙️\u003c\/div\u003e\n\u003cstrong\u003eHelical (Umbrella) Tooth Geometry\u003c\/strong\u003e\n\u003cp\u003eAngled tooth engagement reduces impact noise and spreads contact stress over a larger surface area compared to straight-cut bevel gears, extending service life under cyclic loads.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv class=\"hdiy-icon\"\u003e🏗️\u003c\/div\u003e\n\u003cstrong\u003eCarbon Steel Construction\u003c\/strong\u003e\n\u003cp\u003eMachined from carbon steel for a balance of machinability, tensile strength, and wear resistance suitable for motor-driven gear trains in light-to-medium duty applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv class=\"hdiy-icon\"\u003e📐\u003c\/div\u003e\n\u003cstrong\u003eWide Tooth-Count Range: 15T – 40T\u003c\/strong\u003e\n\u003cp\u003eEighteen size options (15T, 16T … 30T, 35T, 40T) let you dial in the exact gear ratio and pitch circle diameter your drivetrain requires without custom machining.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv class=\"hdiy-icon\"\u003e🔄\u003c\/div\u003e\n\u003cstrong\u003e90° Right-Angle Power Transmission\u003c\/strong\u003e\n\u003cp\u003eBevel geometry transfers rotation between intersecting shafts at a 90° angle, ideal for changing drive direction in compact machine enclosures where space is limited.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv class=\"hdiy-icon\"\u003e📦\u003c\/div\u003e\n\u003cstrong\u003eFlexible Pack Quantities: 1, 4, or 8 pcs\u003c\/strong\u003e\n\u003cp\u003eOrder a single gear for prototyping or a multi-pack for production builds and spare-parts inventory — all at consistent per-unit quality.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"hdiy-table-wrap\"\u003e\n\u003ch2\u003e📐 Technical Specifications — 1.5M Bevel Helical Gear\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModule\u003c\/th\u003e\n\u003ctd\u003e1.5M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTooth Profile\u003c\/th\u003e\n\u003ctd\u003eHelical bevel (umbrella tooth)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCarbon steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTooth Count Range\u003c\/th\u003e\n\u003ctd\u003e15T – 40T (18 sizes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePitch Circle Diameter Range\u003c\/th\u003e\n\u003ctd\u003e24.3 mm – 61.8 mm (0.96 in – 2.43 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShaft Angle\u003c\/th\u003e\n\u003ctd\u003e90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBore Diameter\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKeyway\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Finish\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePressure Angle\u003c\/th\u003e\n\u003ctd\u003eTypically 20°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack Quantity\u003c\/th\u003e\n\u003ctd\u003e1 pcs \/ 4 pcs \/ 8 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (per piece)\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"hdiy-faq\"\u003e\n\u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow do I choose the right tooth count for my application?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eSelect the tooth count based on your required gear ratio and available shaft spacing. For a 1:1 ratio, pair two gears of the same tooth count. For speed reduction, use a smaller driver gear and a larger driven gear — for example, a 15T driving a 30T gives a 2:1 reduction. Always verify that the pitch circle diameters of the mating pair fit within your housing clearance.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat shaft diameter does each gear fit?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eBore diameter varies by tooth count and is listed in the variant detail page. Please check the bore spec for your chosen size against your motor or shaft diameter before ordering. If you need a custom bore, the carbon steel construction allows straightforward machining by a local shop.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eAre these gears strong enough for continuous motor-driven use?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eYes, for light-to-medium duty continuous operation. Carbon steel provides adequate tensile and shear strength for stepper and servo motor applications typical in CNC routers, 3D printers, and small automation rigs. For heavy industrial loads or high-speed applications above approximately 1,500 RPM, consider whether a hardened or alloy steel variant better suits your torque requirements.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eDo these gears resist corrosion?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eCarbon steel has moderate corrosion resistance. For indoor, dry environments these gears perform well with periodic light lubrication (grease or gear oil). For humid or outdoor environments, apply a corrosion-inhibiting grease and consider a protective coating. If corrosion resistance is a primary concern, look for stainless steel or brass bevel gear alternatives.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan I mix different tooth counts to create a gear reduction?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eYes. Because all gears in this series share the same 1.5 module, any two sizes will mesh correctly at a 90° shaft angle. The gear ratio equals the driven tooth count divided by the driver tooth count. For example, pairing a 20T driver with a 40T driven gear yields a 2:1 speed reduction (and 2× torque multiplication, ignoring losses).\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhy choose a helical bevel gear over a straight-cut bevel gear?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eHelical (umbrella) tooth geometry means multiple teeth are in contact simultaneously, which distributes load more evenly, reduces peak stress per tooth, and lowers operating noise. This makes helical bevel gears a better fit for motor-driven applications where smooth, quiet operation and longer tooth life matter — such as CNC axis drives and robotic joints.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat lubricant should I use with these gears?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eA lithium-based or molybdenum-disulfide (MoS₂) grease applied to the tooth faces is suitable for most low-to-medium speed applications. For higher-speed or higher-load setups, an ISO VG 220 gear oil splash-lubrication system is recommended. Re-lubricate at regular maintenance intervals based on your duty cycle.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"hdiy-cta\"\u003e\n🛒 Select your Size and Amount above, then add to cart.\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I choose the right tooth count for my application?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Select the tooth count based on your required gear ratio and available shaft spacing. For a 1:1 ratio, pair two gears of the same tooth count. For speed reduction, use a smaller driver gear and a larger driven gear. Always verify that the pitch circle diameters of the mating pair fit within your housing clearance.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What shaft diameter does each gear fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Bore diameter varies by tooth count and is listed in the variant detail page. Please check the bore spec for your chosen size against your motor or shaft diameter before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Are these gears strong enough for continuous motor-driven use?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, for light-to-medium duty continuous operation. Carbon steel provides adequate tensile and shear strength for stepper and servo motor applications typical in CNC routers, 3D printers, and small automation rigs.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Do these gears resist corrosion?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Carbon steel has moderate corrosion resistance. For indoor, dry environments these gears perform well with periodic light lubrication. For humid or outdoor environments, apply a corrosion-inhibiting grease and consider a protective coating.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I mix different tooth counts to create a gear reduction?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Because all gears in this series share the same 1.5 module, any two sizes will mesh correctly at a 90° shaft angle. The gear ratio equals the driven tooth count divided by the driver tooth count.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Why choose a helical bevel gear over a straight-cut bevel gear?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Helical tooth geometry means multiple teeth are in contact simultaneously, distributing load more evenly, reducing peak stress per tooth, and lowering operating noise — ideal for motor-driven CNC and robotic applications.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What lubricant should I use with these gears?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"A lithium-based or MoS₂ grease applied to the tooth faces is suitable for most low-to-medium speed applications. For higher-speed or higher-load setups, an ISO VG 220 gear oil system is recommended.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"HomeDIYer","offers":[{"title":"1.5M 15T (D24.3mm) \/ 1pcs","offer_id":52439906386194,"sku":"YULESHXJZC1837x1","price":5.97,"currency_code":"USD","in_stock":true},{"title":"1.5M 16T (D25.8mm) \/ 1pcs","offer_id":52439906418962,"sku":"YULESHXJZC1838x1","price":6.15,"currency_code":"USD","in_stock":true},{"title":"1.5M 17T (D27.3mm) \/ 1pcs","offer_id":52439906451730,"sku":"YULESHXJZC1839x1","price":6.23,"currency_code":"USD","in_stock":true},{"title":"1.5M 18T (D28.8mm) \/ 1pcs","offer_id":52439906484498,"sku":"YULESHXJZC1840x1","price":6.23,"currency_code":"USD","in_stock":true},{"title":"1.5M 19T (D30.3mm) \/ 1pcs","offer_id":52439906517266,"sku":"YULESHXJZC1841x1","price":7.44,"currency_code":"USD","in_stock":true},{"title":"1.5M 20T (D31.8mm) \/ 1pcs","offer_id":52439906550034,"sku":"YULESHXJZC1842x1","price":8.98,"currency_code":"USD","in_stock":true},{"title":"1.5M 21T (D33.3mm) \/ 1pcs","offer_id":52439906582802,"sku":"YULESHXJZC1843x1","price":9.17,"currency_code":"USD","in_stock":true},{"title":"1.5M 22T (D34.8mm) \/ 1pcs","offer_id":52439906615570,"sku":"YULESHXJZC1844x1","price":9.34,"currency_code":"USD","in_stock":true},{"title":"1.5M 23T (D36.3mm) \/ 1pcs","offer_id":52439906648338,"sku":"YULESHXJZC1845x1","price":9.45,"currency_code":"USD","in_stock":true},{"title":"1.5M 24T (D37.8mm) \/ 1pcs","offer_id":52439906681106,"sku":"YULESHXJZC1846x1","price":9.53,"currency_code":"USD","in_stock":true},{"title":"1.5M 25T (D39.3mm) \/ 1pcs","offer_id":52439906713874,"sku":"YULESHXJZC1847x1","price":9.53,"currency_code":"USD","in_stock":true},{"title":"1.5M 26T (D40.8mm) \/ 1pcs","offer_id":52439906746642,"sku":"YULESHXJZC1848x1","price":11.85,"currency_code":"USD","in_stock":true},{"title":"1.5M 27T (D42.3mm) \/ 1pcs","offer_id":52439906779410,"sku":"YULESHXJZC1849x1","price":14.23,"currency_code":"USD","in_stock":true},{"title":"1.5M 28T (D43.8mm) \/ 1pcs","offer_id":52439906812178,"sku":"YULESHXJZC1850x1","price":14.31,"currency_code":"USD","in_stock":true},{"title":"1.5M 29T (D45.3mm) \/ 1pcs","offer_id":52439906844946,"sku":"YULESHXJZC1851x1","price":17.61,"currency_code":"USD","in_stock":true},{"title":"1.5M 30T (D46.8mm) \/ 1pcs","offer_id":52439906877714,"sku":"YULESHXJZC1852x1","price":19.08,"currency_code":"USD","in_stock":true},{"title":"1.5M 35T (D54.3mm) \/ 1pcs","offer_id":52439906910482,"sku":"YULESHXJZC1853x1","price":24.4,"currency_code":"USD","in_stock":true},{"title":"1.5M 40T (D61.8mm) \/ 1pcs","offer_id":52439906943250,"sku":"YULESHXJZC1854x1","price":29.36,"currency_code":"USD","in_stock":true},{"title":"1.5M 15T (D24.3mm) \/ 4pcs","offer_id":52439906976018,"sku":"YULESHXJZC1837x4","price":20.18,"currency_code":"USD","in_stock":true},{"title":"1.5M 16T (D25.8mm) \/ 4pcs","offer_id":52439907008786,"sku":"YULESHXJZC1838x4","price":20.66,"currency_code":"USD","in_stock":true},{"title":"1.5M 17T (D27.3mm) \/ 4pcs","offer_id":52439907041554,"sku":"YULESHXJZC1839x4","price":21.2,"currency_code":"USD","in_stock":true},{"title":"1.5M 18T (D28.8mm) \/ 4pcs","offer_id":52439907074322,"sku":"YULESHXJZC1840x4","price":21.2,"currency_code":"USD","in_stock":true},{"title":"1.5M 19T (D30.3mm) \/ 4pcs","offer_id":52439907107090,"sku":"YULESHXJZC1841x4","price":25.87,"currency_code":"USD","in_stock":true},{"title":"1.5M 20T (D31.8mm) \/ 4pcs","offer_id":52439907139858,"sku":"YULESHXJZC1842x4","price":32.11,"currency_code":"USD","in_stock":true},{"title":"1.5M 21T (D33.3mm) \/ 4pcs","offer_id":52439907172626,"sku":"YULESHXJZC1843x4","price":33.03,"currency_code":"USD","in_stock":true},{"title":"1.5M 22T (D34.8mm) \/ 4pcs","offer_id":52439907205394,"sku":"YULESHXJZC1844x4","price":33.58,"currency_code":"USD","in_stock":true},{"title":"1.5M 23T (D36.3mm) \/ 4pcs","offer_id":52439907238162,"sku":"YULESHXJZC1845x4","price":33.95,"currency_code":"USD","in_stock":true},{"title":"1.5M 24T (D37.8mm) \/ 4pcs","offer_id":52439907270930,"sku":"YULESHXJZC1846x4","price":34.31,"currency_code":"USD","in_stock":true},{"title":"1.5M 25T (D39.3mm) \/ 4pcs","offer_id":52439907303698,"sku":"YULESHXJZC1847x4","price":34.31,"currency_code":"USD","in_stock":true},{"title":"1.5M 26T (D40.8mm) \/ 4pcs","offer_id":52439907336466,"sku":"YULESHXJZC1848x4","price":43.49,"currency_code":"USD","in_stock":true},{"title":"1.5M 27T (D42.3mm) \/ 4pcs","offer_id":52439907369234,"sku":"YULESHXJZC1849x4","price":53.23,"currency_code":"USD","in_stock":true},{"title":"1.5M 28T (D43.8mm) \/ 4pcs","offer_id":52439907402002,"sku":"YULESHXJZC1850x4","price":53.41,"currency_code":"USD","in_stock":true},{"title":"1.5M 29T (D45.3mm) \/ 4pcs","offer_id":52439907434770,"sku":"YULESHXJZC1851x4","price":66.63,"currency_code":"USD","in_stock":true},{"title":"1.5M 30T (D46.8mm) \/ 4pcs","offer_id":52439907467538,"sku":"YULESHXJZC1852x4","price":72.61,"currency_code":"USD","in_stock":true},{"title":"1.5M 35T (D54.3mm) \/ 4pcs","offer_id":52439907500306,"sku":"YULESHXJZC1853x4","price":93.62,"currency_code":"USD","in_stock":true},{"title":"1.5M 40T (D61.8mm) \/ 4pcs","offer_id":52439907533074,"sku":"YULESHXJZC1854x4","price":113.74,"currency_code":"USD","in_stock":true},{"title":"1.5M 15T (D24.3mm) \/ 8pcs","offer_id":52439907565842,"sku":"YULESHXJZC1837x8","price":39.02,"currency_code":"USD","in_stock":true},{"title":"1.5M 16T (D25.8mm) \/ 8pcs","offer_id":52439907598610,"sku":"YULESHXJZC1838x8","price":40.12,"currency_code":"USD","in_stock":true},{"title":"1.5M 17T (D27.3mm) \/ 8pcs","offer_id":52439907631378,"sku":"YULESHXJZC1839x8","price":41.11,"currency_code":"USD","in_stock":true},{"title":"1.5M 18T (D28.8mm) \/ 8pcs","offer_id":52439907664146,"sku":"YULESHXJZC1840x8","price":41.11,"currency_code":"USD","in_stock":true},{"title":"1.5M 19T (D30.3mm) \/ 8pcs","offer_id":52439907696914,"sku":"YULESHXJZC1841x8","price":50.47,"currency_code":"USD","in_stock":true},{"title":"1.5M 20T (D31.8mm) \/ 8pcs","offer_id":52439907729682,"sku":"YULESHXJZC1842x8","price":63.06,"currency_code":"USD","in_stock":true},{"title":"1.5M 21T (D33.3mm) \/ 8pcs","offer_id":52439907762450,"sku":"YULESHXJZC1843x8","price":64.9,"currency_code":"USD","in_stock":true},{"title":"1.5M 22T (D34.8mm) \/ 8pcs","offer_id":52439907795218,"sku":"YULESHXJZC1844x8","price":65.89,"currency_code":"USD","in_stock":true},{"title":"1.5M 23T (D36.3mm) \/ 8pcs","offer_id":52439907827986,"sku":"YULESHXJZC1845x8","price":66.63,"currency_code":"USD","in_stock":true},{"title":"1.5M 24T (D37.8mm) \/ 8pcs","offer_id":52439907860754,"sku":"YULESHXJZC1846x8","price":67.36,"currency_code":"USD","in_stock":true},{"title":"1.5M 25T (D39.3mm) \/ 8pcs","offer_id":52439907893522,"sku":"YULESHXJZC1847x8","price":67.36,"currency_code":"USD","in_stock":true},{"title":"1.5M 26T (D40.8mm) \/ 8pcs","offer_id":52439907926290,"sku":"YULESHXJZC1848x8","price":85.72,"currency_code":"USD","in_stock":true},{"title":"1.5M 27T (D42.3mm) \/ 8pcs","offer_id":52439907959058,"sku":"YULESHXJZC1849x8","price":105.11,"currency_code":"USD","in_stock":true},{"title":"1.5M 28T (D43.8mm) \/ 8pcs","offer_id":52439907991826,"sku":"YULESHXJZC1850x8","price":105.48,"currency_code":"USD","in_stock":true},{"title":"1.5M 29T (D45.3mm) \/ 8pcs","offer_id":52439908024594,"sku":"YULESHXJZC1851x8","price":131.99,"currency_code":"USD","in_stock":true},{"title":"1.5M 30T (D46.8mm) \/ 8pcs","offer_id":52439908057362,"sku":"YULESHXJZC1852x8","price":143.93,"currency_code":"USD","in_stock":true},{"title":"1.5M 35T (D54.3mm) \/ 8pcs","offer_id":52439908090130,"sku":"YULESHXJZC1853x8","price":185.97,"currency_code":"USD","in_stock":true},{"title":"1.5M 40T (D61.8mm) \/ 8pcs","offer_id":52439908122898,"sku":"YULESHXJZC1854x8","price":226.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/Main-02_b11d747d-3310-4354-b991-251db4415843.jpg?v=1783522084","url":"https:\/\/homediyer.com\/products\/1-5-module-steel-bevel-helical-motor-gear-15-40-tooth","provider":"HomeDIYer","version":"1.0","type":"link"}