{"product_id":"1-5m-bevel-gear-15-40t-miter-gear-1-1-ratio","title":"1.5 Mod Kegelrad 15-40 Zähne Kegelzahnrad Übersetzung 1:1 1.5M 15-40T Bevel Gear","description":"\u003cdiv class=\"hdiy-desc\"\u003e\n\u003cdiv class=\"hdiy-overview\"\u003e\n\u003ch2\u003e1.5 Module Bevel Gear 15–40T — Precision Miter Gear for 1:1 Right-Angle Drive Systems\u003c\/h2\u003e\n\u003cp\u003eWhen your build demands a reliable 90° power transfer without slop or backlash, a mismatched or worn bevel gear becomes the weakest link in the entire drivetrain. Engineers, robotics builders, and DIY machine makers who need repeatable, low-noise right-angle transmission choose a properly spec'd miter gear pair — and that starts with getting the module and tooth count exactly right.\u003c\/p\u003e\n\u003cp\u003eThese 1.5 module bevel gears are machined from carbon steel and are available in single-gear options spanning 15 to 40 teeth, as well as matched miter pairs (e.g., 15T+30T, 16T+32T, 18T+36T, 20T+40T) for a true 1:1 or 2:1 ratio drive. Bore diameter and hub dimensions vary by tooth count — typically 5–12 mm bore for smaller gears and 8–20 mm for larger ones. Tooth width and pitch cone angle are precision-ground to DIN\/AGMA standards for smooth mesh engagement.\u003c\/p\u003e\n\u003cp\u003eTypical use cases include: right-angle gearbox assemblies for CNC router Z-axis drives, bevel gear pairs in custom differential mechanisms for robotics platforms, and 1:1 miter gear sets for perpendicular shaft connections in automated conveyor or indexing systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"hdiy-compat\"\u003e\n\u003cspan class=\"hdiy-compat-icon\"\u003e⚙️\u003c\/span\u003e \u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed to mesh with other 1.5 module (1.5M) bevel gears of matching tooth count and pressure angle. Confirm bore diameter and shaft size before ordering — see variant options for full dimensional specs.\u003c\/div\u003e\n\u003cdiv class=\"hdiy-features\"\u003e\n\u003ch2\u003e✅ Key Features of These 1.5M Bevel Gears\u003c\/h2\u003e\n\u003cul class=\"hdiy-list\"\u003e\n\u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📐\u003c\/span\u003e \u003cstrong\u003eModule 1.5 Precision Tooth Profile\u003c\/strong\u003e — Standardized 1.5M tooth geometry ensures accurate mesh with any matching 1.5 module bevel gear, minimizing backlash and noise in right-angle drive applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔩\u003c\/span\u003e \u003cstrong\u003eWide Tooth Count Range (15–40T)\u003c\/strong\u003e — Single gears from 15 to 40 teeth plus matched miter pairs available, giving you flexibility for 1:1 ratio drives or compound gear stage designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🏗️\u003c\/span\u003e \u003cstrong\u003eCarbon Steel Construction\u003c\/strong\u003e — Machined from carbon steel for the load-bearing strength needed in motorized and hand-driven mechanical assemblies, with surface hardness suitable for moderate-duty continuous operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔄\u003c\/span\u003e \u003cstrong\u003e90° Shaft Intersection (Miter Gear Geometry)\u003c\/strong\u003e — Pitch cone angle engineered for true 90° intersecting shaft configurations, making these ideal miter gears for right-angle gearboxes and differential builds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🎯\u003c\/span\u003e \u003cstrong\u003eMatched Pair Options Available\u003c\/strong\u003e — Select pre-matched sets (e.g., 15T+30T, 20T+40T) to guarantee correct mesh alignment and ratio without sourcing individual gears separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🛠️\u003c\/span\u003e \u003cstrong\u003eDIY and OEM Ready\u003c\/strong\u003e — Suitable for robotics, CNC machines, automation equipment, and custom mechanical projects requiring a compact, reliable right-angle power transmission solution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"hdiy-table-wrap\"\u003e\n\u003ch2\u003e📐 Technical Specifications — 1.5M Bevel Gear\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModule\u003c\/th\u003e\n\u003ctd\u003e1.5M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTooth Count Range\u003c\/th\u003e\n\u003ctd\u003e15T – 40T (see variant options)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGear Ratio\u003c\/th\u003e\n\u003ctd\u003e1:1 (single gears); 2:1 (matched pairs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShaft Angle\u003c\/th\u003e\n\u003ctd\u003e90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCarbon Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePressure Angle\u003c\/th\u003e\n\u003ctd\u003e20° (standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBore Diameter\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHub Diameter\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall Diameter\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eNatural \/ uncoated machined steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold As\u003c\/th\u003e\n\u003ctd\u003eSingle gear or matched pair (see variant options)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"hdiy-faq\"\u003e\n\u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do I choose the right tooth count for my application?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\n\u003cp\u003eFor a 1:1 right-angle drive (miter gear), select two gears with the same tooth count — for example, two 20T gears. For a 2:1 ratio, choose a matched pair such as 20T+40T. The tooth count affects the pitch diameter and the physical size of the gear, so confirm your available shaft spacing and housing dimensions before selecting.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat does \"1.5 Module\" mean and why does it matter?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\n\u003cp\u003eModule (M) is the standardized unit describing the size of gear teeth — specifically the ratio of pitch diameter to tooth count. A 1.5M gear has teeth sized at 1.5 mm per unit of tooth count. Two bevel gears must share the same module to mesh correctly. Mixing modules (e.g., 1.5M with 2M) will result in improper engagement and rapid wear.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eAre these gears strong enough for motorized or power-driven applications?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\n\u003cp\u003eThese carbon steel bevel gears are suitable for moderate-duty motorized applications such as small CNC machines, robotics actuators, and automated equipment. For continuous high-torque or high-RPM industrial use, verify the specific load rating against your application requirements. Contact us to confirm suitability for heavy-duty use cases.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eDo these gears resist rust and corrosion?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\n\u003cp\u003eThese gears are machined from carbon steel with a natural uncoated finish, which provides good mechanical strength but limited inherent corrosion resistance. For use in humid or outdoor environments, we recommend applying a light machine oil or grease coating during installation and periodically during service. For corrosive environments, consider stainless steel alternatives.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the bore diameter and will it fit my shaft?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\n\u003cp\u003eBore diameter varies by tooth count — smaller gears (15–20T) typically have bores in the 5–8 mm range, while larger gears (25–40T) may have bores from 8–16 mm. Please check the specific variant's dimensional drawing or contact us to confirm the exact bore size for your selected tooth count before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eCan I use a single gear from this listing, or do I need to buy a pair?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\n\u003cp\u003eBoth options are available. Single gears (e.g., 1.5M 20 Zähne) are listed for replacement or custom pairing. Pre-matched miter pairs (e.g., 1.5M 20 Zähne+40 Zähne) are also available as a single variant for convenience. Select the variant that matches your need from the dropdown above.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat tools or skills do I need to install a bevel gear?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\n\u003cp\u003eInstallation typically requires a lathe or press to fit the gear onto the shaft, a keyway or set screw for securing it, and basic mechanical assembly skills. Ensure the shaft diameter matches the bore, and align the pitch cones correctly for smooth mesh. A dial indicator is recommended for checking runout on precision builds.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"hdiy-cta\"\u003e🛒 Select your Modell (tooth count) above, then add to cart.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"HomeDIYer","offers":[{"title":"1.5M 15 Zähne","offer_id":52439308239122,"sku":"ZBTCD16199x1","price":4.27,"currency_code":"USD","in_stock":true},{"title":"1.5M 16 Zähne","offer_id":52439308271890,"sku":"ZBTCD16200x1","price":4.56,"currency_code":"USD","in_stock":true},{"title":"1.5M 17 Zähne","offer_id":52439308304658,"sku":"ZBTCD16201x1","price":4.79,"currency_code":"USD","in_stock":true},{"title":"1.5M 18 Zähne","offer_id":52439308337426,"sku":"ZBTCD16202x1","price":4.98,"currency_code":"USD","in_stock":true},{"title":"1.5M 19 Zähne","offer_id":52439308370194,"sku":"ZBTCD16203x1","price":5.36,"currency_code":"USD","in_stock":true},{"title":"1.5M 20 Zähne","offer_id":52439308402962,"sku":"ZBTCD16204x1","price":5.55,"currency_code":"USD","in_stock":true},{"title":"1.5M 21 Zähne","offer_id":52439308435730,"sku":"ZBTCD16205x1","price":5.83,"currency_code":"USD","in_stock":true},{"title":"1.5M 22 Zähne","offer_id":52439308468498,"sku":"ZBTCD16206x1","price":6.12,"currency_code":"USD","in_stock":true},{"title":"1.5M 23 Zähne","offer_id":52439308501266,"sku":"ZBTCD16207x1","price":6.56,"currency_code":"USD","in_stock":true},{"title":"1.5M 24 Zähne","offer_id":52439308534034,"sku":"ZBTCD16208x1","price":6.79,"currency_code":"USD","in_stock":true},{"title":"1.5M 25 Zähne","offer_id":52439308566802,"sku":"ZBTCD16209x1","price":6.98,"currency_code":"USD","in_stock":true},{"title":"1.5M 26 Zähne","offer_id":52439308599570,"sku":"ZBTCD16210x1","price":7.41,"currency_code":"USD","in_stock":true},{"title":"1.5M 28 Zähne","offer_id":52439308632338,"sku":"ZBTCD16211x1","price":9.26,"currency_code":"USD","in_stock":true},{"title":"1.5M 30 Zähne","offer_id":52439308665106,"sku":"ZBTCD16212x1","price":11.98,"currency_code":"USD","in_stock":true},{"title":"1.5M 32 Zähne","offer_id":52439308697874,"sku":"ZBTCD16213x1","price":14.92,"currency_code":"USD","in_stock":true},{"title":"1.5M 36 Zähne","offer_id":52439308730642,"sku":"ZBTCD16214x1","price":17.78,"currency_code":"USD","in_stock":true},{"title":"1.5M 35 Zähne","offer_id":52439308763410,"sku":"ZBTCD16215x1","price":17.78,"currency_code":"USD","in_stock":true},{"title":"1.5M 40 Zähne","offer_id":52439308796178,"sku":"ZBTCD16216x1","price":20.35,"currency_code":"USD","in_stock":true},{"title":"1.5M 15 Zähne+30 Zähne","offer_id":52439308828946,"sku":"ZBTCD16115x1","price":13.26,"currency_code":"USD","in_stock":true},{"title":"1.5M 16 Zähne+32 Zähne","offer_id":52439308861714,"sku":"ZBTCD16217x1","price":17.78,"currency_code":"USD","in_stock":true},{"title":"1.5M 18 Zähne+36 Zähne","offer_id":52439308894482,"sku":"ZBTCD16218x1","price":19.41,"currency_code":"USD","in_stock":true},{"title":"1.5M 20 Zähne+40 Zähne","offer_id":52439308927250,"sku":"ZBTCD16116x1","price":21.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/Bild1von6_34606efd-b989-484f-b54a-8c0b96890de3.jpg?v=1783343767","url":"https:\/\/homediyer.com\/products\/1-5m-bevel-gear-15-40t-miter-gear-1-1-ratio","provider":"HomeDIYer","version":"1.0","type":"link"}