{"product_id":"1mod-60-tooth-spur-gear-62mm-outer-diameter-drive-gear","title":"1pcs 1Mod 60 Tooth Spur Gear 62mm Outer Diam Drive Gear Motor Gears-Choose Bore","description":"\u003cdiv class=\"hdiy-desc\"\u003e\n\n  \u003cdiv class=\"hdiy-overview\"\u003e\n    \u003ch2\u003e1Mod 60-Tooth Spur Gear — 62mm OD Drive Gear for Motors \u0026amp; CNC Builds\u003c\/h2\u003e\n    \u003cp\u003eWhen your motion-control build demands precise gear meshing and reliable torque transfer, a mismatched or undersized gear becomes the weakest link in the drivetrain. Engineers, robotics hobbyists, and CNC builders who need a dependable 1-module 60-tooth spur gear with a 62mm outer diameter will find this gear a direct fit for standard Mod 1 gear trains.\u003c\/p\u003e\n    \u003cp\u003eThis spur gear is machined to a 1-module (Mod 1) standard with 60 teeth and a 62mm outer diameter (approximately 2.44 inches). The bore is available in multiple sizes ranging from 6mm to 25mm (approximately 0.24 in to 0.98 in), allowing direct shaft mounting without additional adapters. Material is consistent with standard engineering-grade metal alloy used in industrial spur gears; surface finish is See variant options.\u003c\/p\u003e\n    \u003cp\u003eTypical use cases include CNC router axis drives where a 1Mod 60-tooth gear pairs with a matching pinion for lead-screw or rack-and-pinion motion, DC motor gearbox assemblies in robotics platforms requiring a specific gear ratio reduction, and DIY automation projects such as conveyor drives, rotary indexers, or motorized camera sliders that rely on spur gear mesh for smooth, low-backlash power transmission.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-compat\"\u003e\n    \u003cspan class=\"hdiy-compat-icon\"\u003e⚙️\u003c\/span\u003e\n    \u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for Mod 1 (Module 1) gear systems. Meshes with any standard 1Mod spur gear or rack. Bore sizes 6–25mm fit common motor and gearbox output shafts. Confirm shaft diameter before ordering.\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-features\"\u003e\n    \u003ch2\u003e✅ Key Features of These 1Mod 60-Tooth Spur Gears\u003c\/h2\u003e\n    \u003cdiv class=\"hdiy-list\"\u003e\n      \u003cdiv\u003e\n        \u003cspan class=\"hdiy-icon\"\u003e📐\u003c\/span\u003e\n        \u003cstrong\u003ePrecise Mod 1 Standard\u003c\/strong\u003e\n        \u003cp\u003eCut to Module 1 (1Mod) specification with 60 teeth and a 62mm outer diameter, ensuring accurate mesh with any standard Mod 1 mating gear or rack without modification.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv\u003e\n        \u003cspan class=\"hdiy-icon\"\u003e🔩\u003c\/span\u003e\n        \u003cstrong\u003eMulti-Bore Options (6–25mm)\u003c\/strong\u003e\n        \u003cp\u003eAvailable in 12 bore sizes from 6mm to 25mm, covering the most common motor shaft diameters used in CNC, robotics, and automation builds — select your exact bore at checkout.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv\u003e\n        \u003cspan class=\"hdiy-icon\"\u003e⚡\u003c\/span\u003e\n        \u003cstrong\u003eEfficient Torque Transmission\u003c\/strong\u003e\n        \u003cp\u003eStraight-cut spur tooth profile delivers direct, efficient power transfer between parallel shafts with minimal energy loss, suitable for moderate-speed drive applications.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv\u003e\n        \u003cspan class=\"hdiy-icon\"\u003e🛡️\u003c\/span\u003e\n        \u003cstrong\u003eDurable Metal Construction\u003c\/strong\u003e\n        \u003cp\u003eMachined from engineering-grade metal alloy for resistance to wear under continuous cyclic loading, maintaining tooth profile integrity over extended service life.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv\u003e\n        \u003cspan class=\"hdiy-icon\"\u003e🔄\u003c\/span\u003e\n        \u003cstrong\u003eLow-Backlash Mesh\u003c\/strong\u003e\n        \u003cp\u003eConsistent tooth spacing and pitch diameter support tight gear mesh with minimal backlash, important for positioning accuracy in CNC and robotic joint applications.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv\u003e\n        \u003cspan class=\"hdiy-icon\"\u003e🔧\u003c\/span\u003e\n        \u003cstrong\u003eDrop-In Shaft Mounting\u003c\/strong\u003e\n        \u003cp\u003eBored hub accepts standard round shafts directly; use a set screw or keyway (depending on bore variant) to secure the gear to the shaft without custom machining.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-table-wrap\"\u003e\n    \u003ch2\u003e📐 Technical Specifications — 1Mod Spur Gear\u003c\/h2\u003e\n    \u003ctable\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003cth\u003eModule\u003c\/th\u003e\n\u003ctd\u003e1 (Mod 1)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eNumber of Teeth\u003c\/th\u003e\n\u003ctd\u003e60T\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eOuter Diameter\u003c\/th\u003e\n\u003ctd\u003e62mm (approx. 2.44 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003ePitch Diameter\u003c\/th\u003e\n\u003ctd\u003e60mm (approx. 2.36 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eBore Diameter\u003c\/th\u003e\n\u003ctd\u003e6mm \/ 8mm \/ 10mm \/ 12mm \/ 14mm \/ 15mm \/ 16mm \/ 17mm \/ 19mm \/ 20mm \/ 22mm \/ 25mm — See variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eFace Width (Hub Thickness)\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003ePressure Angle\u003c\/th\u003e\n\u003ctd\u003e20°\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eTooth Profile\u003c\/th\u003e\n\u003ctd\u003eStraight-cut spur\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eEngineering-grade metal alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eGear Type\u003c\/th\u003e\n\u003ctd\u003eSpur Gear\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e1 piece per order\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-faq\"\u003e\n    \u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I choose the right bore size for my motor shaft?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eMeasure your motor or gearbox output shaft diameter with a caliper. Select the bore size that matches your shaft exactly — for example, a 6mm shaft requires the 6mm bore variant. If your shaft has a flat (D-cut), confirm the bore variant supports a set screw to lock onto the flat. Avoid selecting a bore larger than your shaft diameter, as this will cause slippage.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat does \"1Mod\" or \"Module 1\" mean?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eModule (Mod) is the standard metric unit for gear tooth size. Mod 1 means the pitch diameter divided by the number of teeth equals 1mm per tooth. A 60-tooth Mod 1 gear has a pitch diameter of 60mm. For two gears to mesh correctly, they must share the same module number. This gear will mesh with any other Mod 1 spur gear or Mod 1 rack.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eIs this gear compatible with a Mod 1 rack for linear motion?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eYes. A Mod 1 spur gear meshes directly with a Mod 1 rack. This 60-tooth gear is commonly used in rack-and-pinion CNC router builds and linear actuator systems. Ensure the rack and gear share the same pressure angle (20° is standard for Mod 1 components).\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow strong is this gear under load?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eLoad capacity depends on the material, face width, and operating speed. As a Mod 1 gear with 60 teeth and a 62mm outer diameter, it is suited for moderate torque applications typical of small CNC machines, robotics joints, and motorized automation rigs. For heavy-duty industrial loads, consult the gear's rated torque based on the specific material variant. Contact us to confirm load ratings for your application.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eDoes this gear resist corrosion for outdoor or humid environments?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eCorrosion resistance depends on the material and surface finish of the specific variant. Metal alloy gears without a protective coating may oxidize in humid or wet environments. For outdoor or high-moisture applications, consider applying a light machine oil or grease to the gear teeth, or contact us to confirm whether a corrosion-resistant finish variant is available.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan I use this gear with a stepper or servo motor?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eYes. This gear is compatible with stepper and servo motor shafts as long as the shaft diameter matches the selected bore size. It is widely used in NEMA 17 and NEMA 23 stepper motor drive trains for CNC and 3D printer extruder or axis applications. Verify the motor shaft diameter and select the corresponding bore variant before ordering.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eIs one gear included per order, or is it a set?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eEach order includes 1 piece (1 spur gear). If you need a matched gear pair or multiple gears for a multi-axis build, simply adjust the quantity at checkout or place separate orders for different bore sizes.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-cta\"\u003e\n    🛒 Select your bore size above, then add to cart.\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I choose the right bore size for my motor shaft?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Measure your motor or gearbox output shaft diameter with a caliper. Select the bore size that matches your shaft exactly. If your shaft has a flat (D-cut), confirm the bore variant supports a set screw. Avoid selecting a bore larger than your shaft diameter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does '1Mod' or 'Module 1' mean?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Module (Mod) is the standard metric unit for gear tooth size. Mod 1 means the pitch diameter divided by the number of teeth equals 1mm per tooth. A 60-tooth Mod 1 gear has a pitch diameter of 60mm. For two gears to mesh correctly, they must share the same module number.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is this gear compatible with a Mod 1 rack for linear motion?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. A Mod 1 spur gear meshes directly with a Mod 1 rack. This 60-tooth gear is commonly used in rack-and-pinion CNC router builds and linear actuator systems. Ensure the rack and gear share the same pressure angle (20° is standard).\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How strong is this gear under load?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Load capacity depends on the material, face width, and operating speed. This gear is suited for moderate torque applications typical of small CNC machines, robotics joints, and motorized automation rigs. Contact us to confirm load ratings for your application.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does this gear resist corrosion for outdoor or humid environments?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Corrosion resistance depends on the material and surface finish of the specific variant. For outdoor or high-moisture applications, apply a light machine oil or grease to the gear teeth, or contact us to confirm whether a corrosion-resistant finish variant is available.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I use this gear with a stepper or servo motor?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. This gear is compatible with stepper and servo motor shafts as long as the shaft diameter matches the selected bore size. It is widely used in NEMA 17 and NEMA 23 stepper motor drive trains for CNC and 3D printer applications.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is one gear included per order, or is it a set?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Each order includes 1 piece (1 spur gear). If you need a matched gear pair or multiple gears, adjust the quantity at checkout or place separate orders for different bore sizes.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"HomeDIYer","offers":[{"title":"1Mod 60T \/ 6mm","offer_id":52442443284754,"sku":"GLFBLFFGLBZSJ057626x1","price":35.17,"currency_code":"USD","in_stock":true},{"title":"1Mod 60T \/ 8mm","offer_id":52442443317522,"sku":"GLFBLFFGLBZSJ057627x1","price":35.17,"currency_code":"USD","in_stock":true},{"title":"1Mod 60T \/ 10mm","offer_id":52442443350290,"sku":"GLFBLFFGLBZSJ057628x1","price":35.17,"currency_code":"USD","in_stock":true},{"title":"1Mod 60T \/ 12mm","offer_id":52442443383058,"sku":"GLFBLFFGLBZSJ057629x1","price":35.17,"currency_code":"USD","in_stock":true},{"title":"1Mod 60T \/ 14mm","offer_id":52442443415826,"sku":"GLFBLFFGLBZSJ057630x1","price":35.33,"currency_code":"USD","in_stock":true},{"title":"1Mod 60T \/ 15mm","offer_id":52442443448594,"sku":"GLFBLFFGLBZSJ057631x1","price":35.33,"currency_code":"USD","in_stock":true},{"title":"1Mod 60T \/ 16mm","offer_id":52442443481362,"sku":"GLFBLFFGLBZSJ057632x1","price":35.33,"currency_code":"USD","in_stock":true},{"title":"1Mod 60T \/ 17mm","offer_id":52442443514130,"sku":"GLFBLFFGLBZSJ057633x1","price":35.33,"currency_code":"USD","in_stock":true},{"title":"1Mod 60T \/ 19mm","offer_id":52442443546898,"sku":"GLFBLFFGLBZSJ057634x1","price":35.88,"currency_code":"USD","in_stock":true},{"title":"1Mod 60T \/ 20mm","offer_id":52442443579666,"sku":"GLFBLFFGLBZSJ057635x1","price":35.88,"currency_code":"USD","in_stock":true},{"title":"1Mod 60T \/ 22mm","offer_id":52442443612434,"sku":"GLFBLFFGLBZSJ057636x1","price":35.88,"currency_code":"USD","in_stock":true},{"title":"1Mod 60T \/ 25mm","offer_id":52442443645202,"sku":"GLFBLFFGLBZSJ057637x1","price":35.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/Main-12_c55880d8-f70d-4635-bf48-0f55e06c6902.jpg?v=1783502243","url":"https:\/\/homediyer.com\/products\/1mod-60-tooth-spur-gear-62mm-outer-diameter-drive-gear","provider":"HomeDIYer","version":"1.0","type":"link"}