{"product_id":"35-roller-chain-bent-ear-06b-pitch-3-8-1-5m","title":"#35 Roller Chain Both Side With Bent Ear 06B Pitch 3\/8\" x 1.5Meters","description":"\u003cdiv class=\"hdiy-desc\"\u003e\n\n\u003cdiv class=\"hdiy-overview\"\u003e\n\u003ch2\u003e#35 Roller Chain with Bent Ear — Reliable 06B Drive Chain for Industrial \u0026amp; Agricultural Use\u003c\/h2\u003e\n\u003cp\u003eWhen standard roller chain isn't enough for your conveyor or attachment application, engineers and fabricators reach for a \u003cstrong\u003e#35 roller chain with bent ear\u003c\/strong\u003e. The double-sided bent ear (also called a bent attachment plate) provides secure anchor points for fixtures, flights, or brackets — eliminating the need for custom welding or secondary fabrication. This chain is the go-to solution for DIYers and professionals who need a dependable, ready-to-mount drive chain.\u003c\/p\u003e\n\u003cp\u003eThis listing covers a \u003cstrong\u003e06B pitch roller chain\u003c\/strong\u003e with a 3\/8\" (9.525 mm) pitch, featuring bent ears on both sides of every link. The chain runs approximately 1.5 meters (approx. 59 inches) in length. Link count and exact attachment spacing may vary by variant — see variant options for full dimensional details. Material is carbon steel with a standard zinc or oil-tempered finish for corrosion resistance in typical indoor and light outdoor environments.\u003c\/p\u003e\n\u003cp\u003eTypical use cases include \u003cstrong\u003econveyor attachment chain for agricultural feeders\u003c\/strong\u003e, \u003cstrong\u003eDIY chain drive systems for go-karts and mini bikes\u003c\/strong\u003e, \u003cstrong\u003eindustrial automation attachment chain\u003c\/strong\u003e, and light-duty material handling rigs where positive product engagement is required.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"hdiy-compat\"\u003e\n\u003cspan class=\"hdiy-compat-icon\"\u003e🔗\u003c\/span\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits standard #35 \/ 06B sprockets with 3\/8\" (9.525 mm) pitch. Verify sprocket tooth profile and bore size before ordering.\n\u003c\/div\u003e\n\n\u003cdiv class=\"hdiy-features\"\u003e\n\u003ch2\u003e✅ Key Features of These #35 Bent Ear Roller Chains\u003c\/h2\u003e\n\u003cdiv class=\"hdiy-list\"\u003e\n  \u003cdiv\u003e\n    \u003cspan class=\"hdiy-icon\"\u003e📐\u003c\/span\u003e\n    \u003cstrong\u003eDouble-Sided Bent Ear Attachment\u003c\/strong\u003e\u003cbr\u003eBent ears on both sides of the link allow secure mounting of fixtures, flights, and brackets without additional fabrication.\n  \u003c\/div\u003e\n  \u003cdiv\u003e\n    \u003cspan class=\"hdiy-icon\"\u003e⚙️\u003c\/span\u003e\n    \u003cstrong\u003e06B \/ #35 Standard Pitch — 3\/8\" (9.525 mm)\u003c\/strong\u003e\u003cbr\u003eFully interchangeable with standard #35 and 06B sprockets, making replacement and integration straightforward.\n  \u003c\/div\u003e\n  \u003cdiv\u003e\n    \u003cspan class=\"hdiy-icon\"\u003e📏\u003c\/span\u003e\n    \u003cstrong\u003e1.5 Meter Working Length\u003c\/strong\u003e\u003cbr\u003eApproximately 59 inches of usable chain length, suitable for short conveyor runs, drive loops, and custom fabrication projects.\n  \u003c\/div\u003e\n  \u003cdiv\u003e\n    \u003cspan class=\"hdiy-icon\"\u003e🛡️\u003c\/span\u003e\n    \u003cstrong\u003eCarbon Steel Construction\u003c\/strong\u003e\u003cbr\u003eSolid carbon steel rollers, inner plates, and outer plates deliver the tensile strength needed for continuous-duty drive applications.\n  \u003c\/div\u003e\n  \u003cdiv\u003e\n    \u003cspan class=\"hdiy-icon\"\u003e💧\u003c\/span\u003e\n    \u003cstrong\u003eOil-Tempered Finish for Corrosion Resistance\u003c\/strong\u003e\u003cbr\u003eFactory-applied oil coating protects against surface oxidation during storage and light-duty use in covered environments.\n  \u003c\/div\u003e\n  \u003cdiv\u003e\n    \u003cspan class=\"hdiy-icon\"\u003e🔩\u003c\/span\u003e\n    \u003cstrong\u003eConnecting Link Compatible\u003c\/strong\u003e\u003cbr\u003eWorks with standard #35 \/ 06B master links and half links for easy length adjustment and loop closure in the field.\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"hdiy-table-wrap\"\u003e\n\u003ch2\u003e📐 Technical Specifications — 06B Bent Ear Roller Chain\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eChain Standard\u003c\/th\u003e\n\u003ctd\u003e#35 \/ 06B\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePitch\u003c\/th\u003e\n\u003ctd\u003e3\/8\" (9.525 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eChain Length\u003c\/th\u003e\n\u003ctd\u003e1.5 m (approx. 59 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAttachment Type\u003c\/th\u003e\n\u003ctd\u003eBent ear, both sides\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRoller Diameter\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eInner Plate Width\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTensile Strength\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCarbon steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eOil-tempered \/ zinc-coated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConnecting Link\u003c\/th\u003e\n\u003ctd\u003eStandard #35 \/ 06B master link (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight (approx.)\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"hdiy-faq\"\u003e\n\u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003eWhat is the difference between #35 and 06B roller chain?\u003c\/summary\u003e\n  \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003e#35 is the ANSI designation and 06B is the ISO\/BS designation for the same pitch class (3\/8\" \/ 9.525 mm). While the pitch is identical, there are minor dimensional differences in roller diameter and inner plate width between ANSI and ISO standards. Always verify sprocket compatibility before mixing standards in the same drive system.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003eWhat does \"bent ear on both sides\" mean?\u003c\/summary\u003e\n  \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eBent ear (also called a bent attachment plate or K-attachment) refers to an outer link plate that has a tab bent perpendicular to the chain run. \"Both sides\" means the tab extends on both the left and right side of the link, providing two mounting points per attachment link for symmetric fixture attachment.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003eHow strong is this roller chain for drive applications?\u003c\/summary\u003e\n  \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eStandard #35 \/ 06B carbon steel roller chain has a typical minimum tensile strength in the range of 7.8–8.9 kN (approximately 1,750–2,000 lbf), though exact values depend on the specific manufacturer's specification. For safety-critical applications, always apply an appropriate service factor and consult the chain's rated working load before use.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003eIs this chain suitable for outdoor or wet environments?\u003c\/summary\u003e\n  \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eThe oil-tempered finish provides basic protection against surface rust during storage and light indoor use. For prolonged outdoor exposure, wet environments, or chemical contact, we recommend applying a dedicated chain lubricant regularly or considering a stainless steel chain variant. Contact us to confirm if a corrosion-resistant option is available.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003eCan I shorten this chain to a custom length?\u003c\/summary\u003e\n  \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eYes. Roller chain can be shortened using a chain breaker tool to remove links to your required length. You will need a compatible #35 \/ 06B master link (connecting link) to close the loop. Half links are also available if you need an odd number of pitches. We recommend measuring your required loop length before cutting.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003eWhat sprockets are compatible with this chain?\u003c\/summary\u003e\n  \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eThis chain is compatible with any standard #35 (ANSI) or 06B (ISO\/BS) sprocket with a 3\/8\" pitch. Verify the sprocket's bore diameter, hub style, and tooth count match your drive system requirements. Using mismatched pitch sprockets will cause rapid wear and potential chain failure.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n  \u003csummary\u003eHow do I choose the right quantity for my project?\u003c\/summary\u003e\n  \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eEach listing covers 1.5 meters of chain. To calculate how many lengths you need: measure the total chain path (drive loop perimeter) in meters, divide by 1.5, and round up. Add 10–15% extra for trimming, joining, and future maintenance replacements. If you need a longer continuous run, order multiple lengths and join them with master links.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"hdiy-cta\"\u003e\n🛒 Select your chain length or pack quantity above, then add to cart.\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the difference between #35 and 06B roller chain?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"#35 is the ANSI designation and 06B is the ISO\/BS designation for the same pitch class (3\/8\\\" \/ 9.525 mm). While the pitch is identical, there are minor dimensional differences in roller diameter and inner plate width between ANSI and ISO standards. Always verify sprocket compatibility before mixing standards in the same drive system.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What does 'bent ear on both sides' mean?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Bent ear refers to an outer link plate that has a tab bent perpendicular to the chain run. 'Both sides' means the tab extends on both the left and right side of the link, providing two mounting points per attachment link for symmetric fixture attachment.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How strong is this roller chain for drive applications?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Standard #35 \/ 06B carbon steel roller chain has a typical minimum tensile strength in the range of 7.8–8.9 kN (approximately 1,750–2,000 lbf). For safety-critical applications, always apply an appropriate service factor and consult the chain's rated working load before use.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is this chain suitable for outdoor or wet environments?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The oil-tempered finish provides basic protection against surface rust during storage and light indoor use. For prolonged outdoor exposure or wet environments, apply a dedicated chain lubricant regularly or consider a stainless steel chain variant.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I shorten this chain to a custom length?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Roller chain can be shortened using a chain breaker tool. You will need a compatible #35 \/ 06B master link to close the loop. Half links are also available if you need an odd number of pitches.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What sprockets are compatible with this chain?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"This chain is compatible with any standard #35 (ANSI) or 06B (ISO\/BS) sprocket with a 3\/8\\\" pitch. Verify the sprocket's bore diameter, hub style, and tooth count match your drive system requirements.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I choose the right quantity for my project?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Each listing covers 1.5 meters of chain. Measure the total chain path in meters, divide by 1.5, and round up. Add 10–15% extra for trimming and future maintenance. Order multiple lengths and join with master links for longer runs.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"HomeDIYer","offers":[{"title":"Default Title","offer_id":52423171866898,"sku":"GF2576","price":31.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/Picture1of5_4e1ac8f4-47ea-4976-aeaa-7766944fa269.jpg?v=1782572296","url":"https:\/\/homediyer.com\/products\/35-roller-chain-bent-ear-06b-pitch-3-8-1-5m","provider":"HomeDIYer","version":"1.0","type":"link"}