{"product_id":"brass-foil-roll-0-02mm-thick-metal-sheet-strip-band","title":"Brass Foil Roll 0.02mm Thick Metal Sheet Strip Band 10-300mm Width 1000mm Length","description":"\u003cdiv class=\"hdiy-desc\"\u003e\n\n  \u003cdiv class=\"hdiy-overview\"\u003e\n    \u003ch2\u003eBrass Foil Roll 0.02mm Thick — Precision Metal Sheet Strip for Shims, Crafts \u0026amp; Metalwork\u003c\/h2\u003e\n    \u003cp\u003eWhen your project demands exact tolerances and a material that holds its shape without adding bulk, finding the right ultra-thin metal strip can be a real challenge. Hobbyists, model makers, machinists, and DIY builders who need reliable shim stock or decorative metal banding often struggle with foils that tear, corrode, or arrive in non-standard widths. This brass foil roll is engineered for those who need consistent thickness and clean edges every time.\u003c\/p\u003e\n    \u003cp\u003eEach roll is made from brass alloy sheet stock, offering a warm golden finish with good formability and moderate corrosion resistance. The foil measures 0.02mm (approximately 0.0008 in) thick and 1000mm (39.4 in) in length, with widths ranging from 10mm (0.39 in) to 200mm (7.87 in) across the available variants — select the exact width your application requires.\u003c\/p\u003e\n    \u003cp\u003eTypical applications include precision shimming between mechanical components, decorative inlay banding on woodworking projects, scale model detailing, electrical shielding strips, and craft metalwork where a thin, workable brass sheet strip is needed. Long-tail use cases include guitar fret slot shimming, watchmaking spacers, and architectural model cladding.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-compat\"\u003e\n    \u003cspan class=\"hdiy-compat-icon\"\u003e🔧\u003c\/span\u003e\n    \u003cstrong\u003eCompatible with:\u003c\/strong\u003e Shim stock applications, woodworking inlay, scale modeling, precision machining, electronics shielding, and general metalcraft projects requiring 0.02mm brass foil.\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-features\"\u003e\n    \u003ch2\u003e✅ Key Features of These Brass Foil Rolls\u003c\/h2\u003e\n    \u003cul class=\"hdiy-list\"\u003e\n      \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📏\u003c\/span\u003e\u003cstrong\u003eUltra-Thin 0.02mm Gauge\u003c\/strong\u003e — Consistent 0.02mm thickness across the full roll length, ideal for precision shimming and tight-tolerance fitting work.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📐\u003c\/span\u003e\u003cstrong\u003eMultiple Width Options\u003c\/strong\u003e — Available from 10mm to 200mm wide (0.39–7.87 in), so you can match the exact strip width your project demands without cutting waste.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔩\u003c\/span\u003e\u003cstrong\u003e1000mm Standard Roll Length\u003c\/strong\u003e — Each roll provides a full 1000mm (39.4 in) of usable material, giving you enough length for most single-project applications.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e✂️\u003c\/span\u003e\u003cstrong\u003eClean, Workable Brass Alloy\u003c\/strong\u003e — Brass is easy to cut with scissors or a craft knife, bends without cracking at this gauge, and can be soldered or bonded with adhesive.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🛡️\u003c\/span\u003e\u003cstrong\u003eModerate Corrosion Resistance\u003c\/strong\u003e — Brass naturally resists oxidation in typical indoor environments, making it suitable for decorative and light mechanical applications.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🎨\u003c\/span\u003e\u003cstrong\u003eWarm Golden Finish\u003c\/strong\u003e — The natural brass tone suits decorative inlay, model detailing, and visible metalwork where appearance matters alongside function.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-table-wrap\"\u003e\n    \u003ch2\u003e📐 Technical Specifications — Brass Foil Roll\u003c\/h2\u003e\n    \u003ctable\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass alloy (copper-zinc)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e0.02mm (0.0008 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eWidth Range\u003c\/th\u003e\n\u003ctd\u003e10mm – 200mm (0.39 in – 7.87 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1000mm (39.4 in) per roll\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eNatural brass (golden tone)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eTemper \/ Hardness\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eTensile Strength\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eForm\u003c\/th\u003e\n\u003ctd\u003eRolled strip \/ foil band\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCorrosion Resistance\u003c\/th\u003e\n\u003ctd\u003eModerate (suitable for indoor use)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eSolderable\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eQuantity per Order\u003c\/th\u003e\n\u003ctd\u003e1 roll\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-faq\"\u003e\n    \u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I choose the right width for my project?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eSelect the width that matches or slightly exceeds the area you need to cover. For shimming applications, match the width to the gap or bearing surface. For decorative inlay, measure the channel or groove width first. All widths are 1000mm long, so you can trim to length as needed.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eIs 0.02mm brass foil strong enough for mechanical shimming?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eAt 0.02mm, this foil is designed for light-duty shimming where very small gap adjustments are needed — such as fine-tuning bearing clearances, aligning precision instruments, or stacking multiple layers to achieve a target thickness. It is not intended for heavy load-bearing applications.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWill this brass foil rust or corrode over time?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eBrass resists rust (it contains no iron) and offers moderate resistance to oxidation in typical indoor environments. Over time it may develop a natural patina. For humid or outdoor environments, consider applying a clear lacquer coat to preserve the finish.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan I solder or glue this brass foil?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eYes. Brass is solderable with standard rosin-core solder and a suitable flux. It also bonds well with cyanoacrylate (super glue), epoxy, and contact cement. Clean the surface with isopropyl alcohol before bonding for best adhesion.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan I cut this foil with regular scissors or a craft knife?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eYes. At 0.02mm thickness, this brass foil cuts cleanly with sharp scissors, a craft knife, or metal shears. For straight cuts, use a metal ruler as a guide. Avoid tearing — always cut with a smooth, continuous motion.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eIs this the same as copper foil or aluminum foil tape?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eNo. This is a brass alloy foil (copper-zinc), which differs from pure copper foil (higher conductivity, redder tone) and aluminum foil (lighter, softer, silver tone). Brass offers a balance of workability, corrosion resistance, and a warm golden appearance that neither copper nor aluminum provides.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow many layers do I need to stack to reach a specific shim thickness?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eSince each layer is 0.02mm thick, divide your target gap by 0.02 to find the number of layers. For example, a 0.1mm shim requires 5 layers. Layers can be stacked and held in place with a small amount of adhesive or simply compressed between components.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-cta\"\u003e\n    🛒 Select your \u003cstrong\u003eThick x Width x Length\u003c\/strong\u003e above, then add to cart.\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I choose the right width for my project?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Select the width that matches or slightly exceeds the area you need to cover. For shimming applications, match the width to the gap or bearing surface. For decorative inlay, measure the channel or groove width first. All widths are 1000mm long, so you can trim to length as needed.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is 0.02mm brass foil strong enough for mechanical shimming?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"At 0.02mm, this foil is designed for light-duty shimming where very small gap adjustments are needed — such as fine-tuning bearing clearances, aligning precision instruments, or stacking multiple layers to achieve a target thickness. It is not intended for heavy load-bearing applications.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Will this brass foil rust or corrode over time?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Brass resists rust (it contains no iron) and offers moderate resistance to oxidation in typical indoor environments. Over time it may develop a natural patina. For humid or outdoor environments, consider applying a clear lacquer coat to preserve the finish.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I solder or glue this brass foil?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Brass is solderable with standard rosin-core solder and a suitable flux. It also bonds well with cyanoacrylate (super glue), epoxy, and contact cement. Clean the surface with isopropyl alcohol before bonding for best adhesion.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I cut this foil with regular scissors or a craft knife?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. At 0.02mm thickness, this brass foil cuts cleanly with sharp scissors, a craft knife, or metal shears. For straight cuts, use a metal ruler as a guide. Avoid tearing — always cut with a smooth, continuous motion.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is this the same as copper foil or aluminum foil tape?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"No. This is a brass alloy foil (copper-zinc), which differs from pure copper foil (higher conductivity, redder tone) and aluminum foil (lighter, softer, silver tone). Brass offers a balance of workability, corrosion resistance, and a warm golden appearance that neither copper nor aluminum provides.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How many layers do I need to stack to reach a specific shim thickness?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Since each layer is 0.02mm thick, divide your target gap by 0.02 to find the number of layers. For example, a 0.1mm shim requires 5 layers. Layers can be stacked and held in place with a small amount of adhesive or simply compressed between components.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"HomeDIYer","offers":[{"title":"0.02mm x 10mm x 1000mm","offer_id":52410905624850,"sku":"PENGSHBLDJ1033x1","price":5.83,"currency_code":"USD","in_stock":true},{"title":"0.02mm x 15mm x 1000mm","offer_id":52410905657618,"sku":"PENGSHBLDJ1034x1","price":5.92,"currency_code":"USD","in_stock":true},{"title":"0.02mm x 20mm x 1000mm","offer_id":52410905690386,"sku":"PENGSHBLDJ1035x1","price":5.97,"currency_code":"USD","in_stock":true},{"title":"0.02mm x 25mm x 1000mm","offer_id":52410905723154,"sku":"PENGSHBLDJ1036x1","price":6.19,"currency_code":"USD","in_stock":true},{"title":"0.02mm x 30mm x 1000mm","offer_id":52410905755922,"sku":"PENGSHBLDJ1037x1","price":6.32,"currency_code":"USD","in_stock":true},{"title":"0.02mm x 35mm x 1000mm","offer_id":52410905788690,"sku":"PENGSHBLDJ1038x1","price":6.32,"currency_code":"USD","in_stock":true},{"title":"0.02mm x 40mm x 1000mm","offer_id":52410905821458,"sku":"PENGSHBLDJ1039x1","price":6.32,"currency_code":"USD","in_stock":true},{"title":"0.02mm x 50mm x 1000mm","offer_id":52410905854226,"sku":"PENGSHBLDJ1040x1","price":6.32,"currency_code":"USD","in_stock":true},{"title":"0.02mm x 60mm x 1000mm","offer_id":52410905886994,"sku":"PENGSHBLDJ1041x1","price":6.46,"currency_code":"USD","in_stock":true},{"title":"0.02mm x 80mm x 1000mm","offer_id":52410905919762,"sku":"PENGSHBLDJ1042x1","price":8.01,"currency_code":"USD","in_stock":true},{"title":"0.02mm x 100mm x 1000mm","offer_id":52410905952530,"sku":"PENGSHBLDJ1043x1","price":7.96,"currency_code":"USD","in_stock":true},{"title":"0.02mm x 120mm x 1000mm","offer_id":52410905985298,"sku":"PENGSHBLDJ1044x1","price":9.04,"currency_code":"USD","in_stock":true},{"title":"0.02mm x 200mm x 1000mm","offer_id":52410906018066,"sku":"PENGSHBLDJ1045x1","price":11.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/Main-02_2e2368f3-0bf3-4372-a555-f5c865c59f72.jpg?v=1782305973","url":"https:\/\/homediyer.com\/products\/brass-foil-roll-0-02mm-thick-metal-sheet-strip-band","provider":"HomeDIYer","version":"1.0","type":"link"}