{"product_id":"brass-sheet-roll-0-1mm-thick-metal-foil-strip-10-300mm-width-500mm-1000mm-length","title":"Brass Sheet Roll 0.1mm Thick Metal Foil Strip 10-300mm Width 500mm 1000mm Length","description":"\u003cdiv class=\"hdiy-desc\"\u003e\n\n  \u003cdiv class=\"hdiy-overview\"\u003e\n    \u003ch2\u003eBrass Sheet Roll 0.1mm Thick — Flexible Metal Foil Strip for Precision DIY Work\u003c\/h2\u003e\n    \u003cp\u003eWhen your project demands a thin, workable metal layer that cuts cleanly, bends without cracking, and holds its shape, a 0.1mm brass foil strip is the go-to solution for makers, hobbyists, and repair technicians alike. Whether you're shimming a tight mechanical fit, lining a decorative surface, or crafting custom metalwork, finding the right width and length in one ready-to-use roll saves time and reduces waste.\u003c\/p\u003e\n    \u003cp\u003eThis brass sheet roll is made from copper-zinc alloy (brass), offering a warm golden tone with moderate hardness and excellent workability. At 0.1mm (approximately 0.004 inches) thick, the foil is flexible enough to cut with scissors or a craft knife yet rigid enough to hold formed shapes. Available widths range from 10mm to 300mm (roughly 0.39 in to 11.81 in), with length options of 500mm (~19.7 in) or 1000mm (~39.4 in) per roll.\u003c\/p\u003e\n    \u003cp\u003eTypical applications include EMI\/RF shielding in electronics enclosures, decorative inlay work on woodworking and furniture projects, thin shim stock for mechanical gap-filling, and craft or model-making where a thin brass sheet metal strip is needed for fine detail work.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-compat\"\u003e\n    \u003cspan class=\"hdiy-compat-icon\"\u003e🔧\u003c\/span\u003e\n    Compatible with hand tools, rotary cutters, and standard metalworking equipment. Suitable for soldering, bonding with epoxy, and mechanical fastening.\n  \u003c\/div\u003e\n\n  \u003cul class=\"hdiy-list\"\u003e\n    \u003ch2\u003e✅ Key Features of These Brass Sheet Roll Foil Strips\u003c\/h2\u003e\n    \u003cli\u003e\n      \u003cspan class=\"hdiy-icon\"\u003e📏\u003c\/span\u003e\n      \u003cstrong\u003eUltra-Thin 0.1mm Profile\u003c\/strong\u003e — At just 0.1mm thick (≈0.004 in), this brass metal foil strip fits into tight clearances and layered assemblies without adding bulk, making it ideal for precision shimming and fine inlay work.\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cspan class=\"hdiy-icon\"\u003e📐\u003c\/span\u003e\n      \u003cstrong\u003eWide Size Selection\u003c\/strong\u003e — Choose from widths of 10mm, 15mm, 20mm, 25mm, 30mm, 40mm, 45mm, 50mm, 60mm, 100mm, 120mm, 150mm, 200mm, or 300mm, paired with 500mm or 1000mm lengths, so you get exactly the strip size your project requires.\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cspan class=\"hdiy-icon\"\u003e⚡\u003c\/span\u003e\n      \u003cstrong\u003eGood Electrical Conductivity\u003c\/strong\u003e — Brass conducts electricity reliably, making this foil strip a practical choice for EMI shielding, grounding straps, and electrical contact applications in DIY electronics builds.\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cspan class=\"hdiy-icon\"\u003e🛡️\u003c\/span\u003e\n      \u003cstrong\u003eCorrosion-Resistant Alloy\u003c\/strong\u003e — The copper-zinc composition provides natural resistance to oxidation and moisture, keeping the surface stable in typical indoor workshop and craft environments without additional coating.\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cspan class=\"hdiy-icon\"\u003e✂️\u003c\/span\u003e\n      \u003cstrong\u003eEasy to Cut and Form\u003c\/strong\u003e — The 0.1mm gauge cuts cleanly with scissors, a utility knife, or tin snips, and can be bent, rolled, or shaped by hand without cracking, reducing tool requirements for hobbyist and maker projects.\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cspan class=\"hdiy-icon\"\u003e🔩\u003c\/span\u003e\n      \u003cstrong\u003eSolderable and Bondable Surface\u003c\/strong\u003e — The brass surface accepts solder readily and bonds well with metal-compatible epoxy adhesives, expanding its use in electronics repair, decorative metalwork, and structural laminate applications.\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cdiv class=\"hdiy-table-wrap\"\u003e\n    \u003ch2\u003e📐 Technical Specifications — Brass Sheet Roll Foil Strip\u003c\/h2\u003e\n    \u003ctable\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass (Copper-Zinc Alloy)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e0.1mm (≈0.004 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eWidth Options\u003c\/th\u003e\n\u003ctd\u003e10mm \/ 15mm \/ 20mm \/ 25mm \/ 30mm \/ 40mm \/ 45mm \/ 50mm \/ 60mm \/ 100mm \/ 120mm \/ 150mm \/ 200mm \/ 300mm\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eLength Options\u003c\/th\u003e\n\u003ctd\u003e500mm (≈19.7 in) \/ 1000mm (≈39.4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eSurface Finish\u003c\/th\u003e\n\u003ctd\u003eMill finish (natural brass tone)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eTemper\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eQuantity per Order\u003c\/th\u003e\n\u003ctd\u003e1 roll per variant selected\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eShimming, EMI shielding, decorative inlay, crafts, model making, electronics repair\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-faq\"\u003e\n    \u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I choose the right width for my project?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eMeasure the area you need to cover or the slot you need to fill, then select the next width up to ensure full coverage. For shimming applications, match the width to the bearing or joint width. For decorative inlay, choose a width that matches your routed channel. Use the variant selector above to compare all available widths from 10mm to 300mm.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eIs 0.1mm brass foil strong enough for structural shimming?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eAt 0.1mm, this foil is well-suited for light-duty shimming where small gap adjustments are needed — such as aligning machine parts, leveling fixtures, or filling minor clearances. For heavy load-bearing applications requiring significant compressive strength, a thicker shim stock would be more appropriate. Stack multiple layers if a slightly thicker shim is needed.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWill this brass strip rust or corrode over time?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eBrass is naturally resistant to rust because it contains no iron. Over time, exposure to air and moisture may cause the surface to develop a patina (slight darkening or greenish tinge), which is a normal characteristic of copper-zinc alloys. For indoor workshop, craft, or electronics use, this is generally not a concern. If a bright finish is required long-term, a clear lacquer coat can be applied.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan I solder directly to this brass foil?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eYes. Brass accepts solder well when the surface is clean and flux is applied. Use a standard rosin-core or acid-core flux appropriate for brass, and a soldering iron with sufficient wattage to heat the foil evenly. Clean the surface with isopropyl alcohol before soldering to remove any oils or oxidation for the best bond.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat tools do I need to cut this brass sheet roll?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eAt 0.1mm thickness, this foil cuts easily with household scissors, a sharp utility knife and straight edge, or tin snips for wider strips. A rotary cutter on a cutting mat works well for long straight cuts. No power tools are required for most applications, making it accessible for hobbyists and DIY makers without a full metalworking shop.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eIs this the same as copper foil tape, and can it be used for EMI shielding?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eThis is a plain brass foil strip, not an adhesive-backed tape. Brass is a copper-zinc alloy and provides good electrical conductivity suitable for EMI\/RF shielding applications. To use it for shielding, you would secure it mechanically or with conductive adhesive. For applications requiring adhesive-backed foil, additional bonding material will be needed.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I decide between the 500mm and 1000mm length options?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eChoose 500mm if your project requires a shorter run or you want to test the material before committing to a longer piece. The 1000mm roll is more economical per millimeter and suits projects needing continuous coverage, longer shim runs, or multiple cuts from a single piece. Both lengths are available for the 200mm width; other widths are offered in 1000mm length.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-cta\"\u003e\n    🛒 Select your Thick x Width x Length above, then add to cart.\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I choose the right width for my project?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Measure the area you need to cover or the slot you need to fill, then select the next width up to ensure full coverage. For shimming applications, match the width to the bearing or joint width. For decorative inlay, choose a width that matches your routed channel. Use the variant selector above to compare all available widths from 10mm to 300mm.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is 0.1mm brass foil strong enough for structural shimming?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"At 0.1mm, this foil is well-suited for light-duty shimming where small gap adjustments are needed. For heavy load-bearing applications, a thicker shim stock would be more appropriate. Stack multiple layers if a slightly thicker shim is needed.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Will this brass strip rust or corrode over time?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Brass is naturally resistant to rust because it contains no iron. Over time, exposure to air and moisture may cause the surface to develop a patina, which is normal for copper-zinc alloys. For indoor use, this is generally not a concern.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I solder directly to this brass foil?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Brass accepts solder well when the surface is clean and flux is applied. Use a standard rosin-core or acid-core flux appropriate for brass, and clean the surface with isopropyl alcohol before soldering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What tools do I need to cut this brass sheet roll?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"At 0.1mm thickness, this foil cuts easily with household scissors, a sharp utility knife and straight edge, or tin snips for wider strips. A rotary cutter on a cutting mat works well for long straight cuts.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is this the same as copper foil tape, and can it be used for EMI shielding?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"This is a plain brass foil strip, not an adhesive-backed tape. Brass provides good electrical conductivity suitable for EMI\/RF shielding. To use it for shielding, secure it mechanically or with conductive adhesive.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I decide between the 500mm and 1000mm length options?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Choose 500mm for shorter projects or to test the material. The 1000mm roll suits projects needing continuous coverage or multiple cuts from a single piece. Both lengths are available for the 200mm width; other widths are offered in 1000mm length.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"HomeDIYer","offers":[{"title":"0.1mm x 10mm x 1000mm","offer_id":52410905133330,"sku":"PENGSHBLDJ1080x1","price":6.11,"currency_code":"USD","in_stock":true},{"title":"0.1mm x 15mm x 1000mm","offer_id":52410905166098,"sku":"PENGSHBLDJ1081x1","price":6.46,"currency_code":"USD","in_stock":true},{"title":"0.1mm x 20mm x 1000mm","offer_id":52410905198866,"sku":"PENGSHBLDJ1082x1","price":6.65,"currency_code":"USD","in_stock":true},{"title":"0.1mm x 25mm x 1000mm","offer_id":52410905231634,"sku":"PENGSHBLDJ1083x1","price":7.33,"currency_code":"USD","in_stock":true},{"title":"0.1mm x 30mm x 1000mm","offer_id":52410905264402,"sku":"PENGSHBLDJ1084x1","price":8.01,"currency_code":"USD","in_stock":true},{"title":"0.1mm x 40mm x 1000mm","offer_id":52410905297170,"sku":"PENGSHBLDJ1085x1","price":8.69,"currency_code":"USD","in_stock":true},{"title":"0.1mm x 45mm x 1000mm","offer_id":52410905329938,"sku":"PENGSHBLDJ1086x1","price":9.37,"currency_code":"USD","in_stock":true},{"title":"0.1mm x 50mm x 1000mm","offer_id":52410905362706,"sku":"PENGSHBLDJ1087x1","price":10.54,"currency_code":"USD","in_stock":true},{"title":"0.1mm x 60mm x 1000mm","offer_id":52410905395474,"sku":"PENGSHBLDJ1088x1","price":12.58,"currency_code":"USD","in_stock":true},{"title":"0.1mm x 100mm x 1000mm","offer_id":52410905428242,"sku":"PENGSHBLDJ1089x1","price":15.35,"currency_code":"USD","in_stock":true},{"title":"0.1mm x 120mm x 1000mm","offer_id":52410905461010,"sku":"PENGSHBLDJ1090x1","price":18.16,"currency_code":"USD","in_stock":true},{"title":"0.1mm x 150mm x 1000mm","offer_id":52410905493778,"sku":"PENGSHBLDJ1091x1","price":21.69,"currency_code":"USD","in_stock":true},{"title":"0.1mm x 200mm x 1000mm","offer_id":52410905526546,"sku":"PENGSHBLDJ1092x1","price":26.32,"currency_code":"USD","in_stock":true},{"title":"0.1mm x 200mm x 500mm","offer_id":52410905559314,"sku":"PENGSHBLDJ1160x1","price":14.76,"currency_code":"USD","in_stock":true},{"title":"0.1mm x 300mm x 1000mm","offer_id":52410905592082,"sku":"PENGSHBLDJ1093x1","price":39.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/Main-02_6c0a7e03-0c04-4ce1-9087-5ae201f9a682.jpg?v=1782305938","url":"https:\/\/homediyer.com\/products\/brass-sheet-roll-0-1mm-thick-metal-foil-strip-10-300mm-width-500mm-1000mm-length","provider":"HomeDIYer","version":"1.0","type":"link"}