{"product_id":"brass-tube-pipe-300mm-05mm-wall-od-1-5-to-19mm","title":"Brass Tube Brass Pipe 300mm Length — 0.5mm Wall, OD 1.5mm to 19mm","description":"\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I choose the right outer diameter for my project?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Measure the opening or shaft your tube needs to fit over or inside. For a slip fit, choose an OD slightly smaller than the receiving hole. For a press fit, choose an OD equal to or just above the hole diameter. As a reference, 6mm OD is approximately 1\/4 inch, and 12mm OD is approximately 1\/2 inch. When in doubt, order one size up and one size down to test fit before committing.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What wall thickness do these brass tubes have?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"All tubes in this listing have a 0.5mm wall thickness. This is a thin-wall profile, making them well-suited for lightweight model making, jewelry fabrication, and decorative applications where weight and material savings matter.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How strong are these thin-wall brass tubes?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Brass (typically C260 or equivalent) generally offers good tensile strength for its weight, typically in the range of 300–500 MPa depending on temper. At 0.5mm wall thickness, these tubes are suitable for light structural, decorative, and hobby applications. They are not intended for high-pressure hydraulic or heavy load-bearing use.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can these brass tubes be used outdoors or in humid environments?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Brass is naturally corrosion-resistant and generally performs well in moderate outdoor and humid conditions. Over time, brass may develop a patina (oxidation layer) which can be left as-is or polished away. For prolonged outdoor exposure or marine environments, applying a clear lacquer or sealant is recommended to maintain appearance.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What thread or fitting standards are compatible with these tubes?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"These are plain, unthreaded round tubes. They are compatible with standard metric fittings, compression fittings, and push-fit connectors sized to match the outer diameter you select. For threaded connections, a die can typically be used to cut external threads on brass tube. Confirm fitting compatibility with your specific connector before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I cut, solder, or bend these brass tubes?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Brass is one of the most workable metals for hobbyists and professionals alike. These tubes can generally be cut with a tube cutter or fine-tooth saw, soldered with standard lead-free or silver solder, and bent using a tube bender or spring mandrel. At 0.5mm wall thickness, use a close-fitting mandrel when bending to avoid kinking.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the inner diameter (ID) of each tube?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Since wall thickness is 0.5mm on each side, the inner diameter is approximately OD minus 1mm. For example, a 6mm OD tube has an ID of approximately 5mm, and a 12mm OD tube has an ID of approximately 11mm. Confirm exact tolerances with us if your application requires tight ID specifications.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I decide between different OD sizes for model making or RC projects?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"For RC aircraft and model making, tube sizing is typically driven by the axle, rod, or structural member the tube must interface with. Common sizes used in RC and scale modeling are generally in the 2mm–8mm OD range. Larger ODs (10mm–19mm) are more commonly used for structural frames, antenna mounts, or decorative columns in architectural models.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n\n\u003cdiv class=\"hdiy-desc\"\u003e\n\n  \u003cdiv class=\"hdiy-overview\"\u003e\n    \u003ch2\u003eBrass Tube Pipe 300mm — Precision Thin-Wall Stock for Model Making, Jewelry \u0026amp; DIY Fabrication\u003c\/h2\u003e\n    \u003cp\u003eWhether you're building a scale model, fabricating a custom jewelry component, or need a reliable spacer for an RC project, finding the right thin-wall brass tube in the exact outer diameter you need shouldn't require a trip to a specialty metal supplier. This listing covers 31 outer diameter options — from 1.5mm (≈1\/16\") all the way up to 19mm (≈3\/4\") — so hobbyists, makers, and small-shop fabricators can get exactly what they need without buying bulk stock.\u003c\/p\u003e\n    \u003cp\u003eEach piece is a round brass tube with a consistent \u003cstrong\u003e0.5mm wall thickness\u003c\/strong\u003e and a fixed \u003cstrong\u003e300mm (≈11.8\") length\u003c\/strong\u003e. The inner diameter is approximately OD minus 1mm (e.g., a 6mm OD tube has an ID of ≈5mm). Material is brass alloy, offering a warm gold tone, good machinability, and natural corrosion resistance. Available outer diameters range from \u003cstrong\u003e1.5mm (≈1\/16\") to 19mm (≈3\/4\")\u003c\/strong\u003e in 0.5mm increments.\u003c\/p\u003e\n    \u003cp\u003eTypical use cases include: \u003cstrong\u003escale model structural tubing\u003c\/strong\u003e for architectural and RC builds, \u003cstrong\u003ejewelry tube settings and bail components\u003c\/strong\u003e for metalsmithing, \u003cstrong\u003eprecision spacers and standoffs\u003c\/strong\u003e in electronics and mechanical assemblies, and \u003cstrong\u003edecorative inlay tubing\u003c\/strong\u003e for woodworking and pen turning. The 300mm length is long enough for most hobby cuts while remaining easy to handle and ship.\u003c\/p\u003e\n    \u003cdiv class=\"hdiy-compat\"\u003e\n      \u003cspan class=\"hdiy-compat-icon\"\u003eℹ️\u003c\/span\u003e\n      \u003cstrong\u003eCompatibility note:\u003c\/strong\u003e These are plain, unthreaded metric round tubes. Inner diameter = OD − 1mm (0.5mm wall each side). Verify your required OD and ID before ordering — see the FAQ below for a sizing guide.\n    \u003c\/div\u003e\n    \u003cdiv class=\"hdiy-note\"\u003e\n      \u003cspan class=\"hdiy-note-icon\"\u003e⚠️\u003c\/span\u003e\n      \u003cstrong\u003eConfirm your size:\u003c\/strong\u003e With 31 OD options available, double-check your selection before adding to cart. If you need a size not listed or require a custom length, contact us to confirm availability.\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003e✅ Key Features of These Brass Tubes and Pipes\u003c\/h2\u003e\n  \u003cul class=\"hdiy-features\"\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📏\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e31 Outer Diameter Options\u003c\/strong\u003e — Covers 1.5mm (≈1\/16\") through 19mm (≈3\/4\") in 0.5mm steps, giving you the exact OD for tight-tolerance model making and fabrication work without cutting oversized stock.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔩\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eConsistent 0.5mm Wall Thickness\u003c\/strong\u003e — Uniform thin-wall profile across all sizes keeps weight low and material cost efficient, ideal for lightweight structural tubing in RC aircraft frames and scale architectural models.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📐\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e300mm Fixed Length\u003c\/strong\u003e — At approximately 11.8\", each tube is long enough for most hobby cuts and fits standard tube cutters, while remaining compact for safe shipping without distortion.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔧\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eMachinable and Solderable Brass Alloy\u003c\/strong\u003e — Brass cuts cleanly with a fine-tooth saw or tube cutter, accepts standard lead-free solder readily, and can be bent with a close-fitting mandrel — making it a go-to material for jewelry tube settings and precision spacer fabrication.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🌿\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eNatural Corrosion Resistance\u003c\/strong\u003e — Brass develops a protective oxide layer over time, making these tubes suitable for moderate indoor and outdoor decorative applications without additional coating in most environments.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e✂️\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eEasy to Work With Hand Tools\u003c\/strong\u003e — No CNC required. These tubes can be cut, filed, drilled, and polished with standard hobby tools, making them accessible for pen turning inlays, DIY electronics standoffs, and small-batch fabrication runs.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003e📐 Technical Specifications — Brass Round Tube\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-table-wrap\"\u003e\n    \u003ctable\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass alloy (copper-zinc, unbranded)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eOuter Diameter (OD) Range\u003c\/th\u003e\n\u003ctd\u003e1.5mm (≈1\/16\") — 19mm (≈3\/4\"), in 0.5mm increments; see variant selector\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eWall Thickness\u003c\/th\u003e\n\u003ctd\u003e0.5mm (each side)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eInner Diameter (ID)\u003c\/th\u003e\n\u003ctd\u003eOD − 1mm (e.g., 6mm OD → ≈5mm ID; 12mm OD → ≈11mm ID)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e300mm (≈11.8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eTube Profile\u003c\/th\u003e\n\u003ctd\u003eRound, seamless-style, plain ends (unthreaded)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMill finish brass (natural gold tone; may show minor surface marks)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eThread \/ Fitting Type\u003c\/th\u003e\n\u003ctd\u003eUnthreaded — compatible with metric compression fittings sized to OD\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eQuantity per Order\u003c\/th\u003e\n\u003ctd\u003e1 piece per variant selected\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eWorkability\u003c\/th\u003e\n\u003ctd\u003eCuttable, solderable, bendable (use mandrel for thin-wall bending)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eModel making, jewelry fabrication, RC builds, DIY spacers, pen turning inlays, decorative applications\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eHigh-Pressure \/ Structural Load Use\u003c\/th\u003e\n\u003ctd\u003eContact us to confirm — not rated for hydraulic or heavy load-bearing applications\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-faq\"\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I choose the right outer diameter for my project?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eMeasure the opening or shaft your tube needs to fit over or inside. For a slip fit, choose an OD slightly smaller than the receiving hole. For a press fit, choose an OD equal to or just above the hole diameter. As a quick reference: 6mm OD ≈ 1\/4\", 12mm OD ≈ 1\/2\", 19mm OD ≈ 3\/4\". When in doubt, order one size up and one size down to test fit before committing to a larger quantity.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat is the wall thickness, and how do I calculate the inner diameter?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eAll tubes in this listing have a \u003cstrong\u003e0.5mm wall thickness\u003c\/strong\u003e on each side. To find the inner diameter, subtract 1mm from the outer diameter you select. For example: a 6mm OD tube has an ID of approximately 5mm; a 10mm OD tube has an ID of approximately 9mm. If your application requires a tight ID tolerance, contact us to confirm before ordering.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow strong are these thin-wall brass tubes — can they support a load?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eBrass alloy generally offers tensile strength in the range of 300–500 MPa depending on temper and alloy composition. At 0.5mm wall thickness, these tubes are well-suited for light structural, decorative, and hobby applications — such as RC frame members, model building columns, and jewelry components. They are not intended for high-pressure hydraulic lines or heavy structural load-bearing use. Contact us if you need to confirm suitability for a specific application.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan I use these brass tubes outdoors or in humid environments?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eBrass is naturally corrosion-resistant and typically performs well in moderate outdoor and humid conditions. Over time, brass may develop a patina (a natural oxidation layer) which can be left as a protective finish or polished away with brass cleaner. For prolonged outdoor exposure or marine environments, applying a clear lacquer or sealant is generally recommended to maintain the original appearance and slow patina development.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eAre these tubes compatible with standard metric fittings or connectors?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eThese are plain, unthreaded round tubes. They are compatible with standard metric compression fittings, push-fit connectors, and collets sized to match the outer diameter you select. For threaded connections, an external die can typically be used to cut metric threads onto brass tube. Always confirm fitting compatibility with your specific connector or coupling before ordering, as tolerances vary by manufacturer.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan I cut, solder, or bend these brass tubes with standard tools?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eYes — brass is one of the most workable metals for hobbyists and small-shop fabricators. These tubes can generally be:\u003c\/p\u003e\n        \u003cul class=\"hdiy-list\"\u003e\n          \u003cli\u003e\n\u003cstrong\u003eCut\u003c\/strong\u003e with a rotary tube cutter or fine-tooth hacksaw\/jeweler's saw\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eSoldered\u003c\/strong\u003e with standard lead-free or silver solder using a torch or soldering iron\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eBent\u003c\/strong\u003e using a tube bender or close-fitting spring mandrel (important at 0.5mm wall to prevent kinking)\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eDrilled and filed\u003c\/strong\u003e with standard HSS drill bits and needle files\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003eNo CNC or specialized equipment is required for most hobby applications.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat sizes are most commonly used for RC aircraft and scale model building?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eFor RC aircraft and scale model making, tube sizing is typically driven by the axle, rod, or structural member the tube must interface with. Sizes in the \u003cstrong\u003e2mm–8mm OD range\u003c\/strong\u003e are most commonly used for RC linkages, pushrods, and lightweight frame members. Larger ODs (10mm–19mm) are more commonly used for structural columns, antenna mounts, or decorative elements in architectural scale models. If you're unsure, check your model's plans or the diameter of the rod or shaft the tube needs to slide over.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eIs one piece included per order, or is this a pack?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eEach order includes \u003cstrong\u003e1 piece\u003c\/strong\u003e of the selected outer diameter variant. If you need multiple pieces or multiple sizes, simply add each variant to your cart separately or adjust the quantity. Contact us if you need larger quantities — bulk pricing may be available.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-cta\"\u003e\n    🛒 Select your \u003cstrong\u003eouter diameter\u003c\/strong\u003e above, then add to cart — ships from our US warehouse.\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"HomeDIYer","offers":[{"title":"1.5mm \/ 0.5mm \/ 300mm","offer_id":52332680446226,"sku":"CFR02407x1","price":5.11,"currency_code":"USD","in_stock":true},{"title":"2mm \/ 0.5mm \/ 300mm","offer_id":52332680478994,"sku":"CFR02419x1","price":5.25,"currency_code":"USD","in_stock":true},{"title":"2.5mm \/ 0.5mm \/ 300mm","offer_id":52332680511762,"sku":"CFR02425x1","price":7.58,"currency_code":"USD","in_stock":true},{"title":"3mm \/ 0.5mm \/ 300mm","offer_id":52332680544530,"sku":"CFR02431x1","price":4.87,"currency_code":"USD","in_stock":true},{"title":"3.5mm \/ 0.5mm \/ 300mm","offer_id":52332680577298,"sku":"CFR02438x1","price":5.68,"currency_code":"USD","in_stock":true},{"title":"4mm \/ 0.5mm \/ 300mm","offer_id":52332680610066,"sku":"CFR02445x1","price":5.81,"currency_code":"USD","in_stock":true},{"title":"4.5mm \/ 0.5mm \/ 300mm","offer_id":52332680642834,"sku":"CFR02451x1","price":6.61,"currency_code":"USD","in_stock":true},{"title":"5mm \/ 0.5mm \/ 300mm","offer_id":52332680675602,"sku":"CFR02457x1","price":6.77,"currency_code":"USD","in_stock":true},{"title":"5.5mm \/ 0.5mm \/ 300mm","offer_id":52332680708370,"sku":"CFR02464x1","price":7.55,"currency_code":"USD","in_stock":true},{"title":"6mm \/ 0.5mm \/ 300mm","offer_id":52332680741138,"sku":"CFR02470x1","price":7.7,"currency_code":"USD","in_stock":true},{"title":"6.5mm \/ 0.5mm \/ 300mm","offer_id":52332680773906,"sku":"CFR02477x1","price":7.86,"currency_code":"USD","in_stock":true},{"title":"7mm \/ 0.5mm \/ 300mm","offer_id":52332680806674,"sku":"CFR02482x1","price":8.64,"currency_code":"USD","in_stock":true},{"title":"7.5mm \/ 0.5mm \/ 300mm","offer_id":52332680839442,"sku":"CFR02487x1","price":8.79,"currency_code":"USD","in_stock":true},{"title":"8mm \/ 0.5mm \/ 300mm","offer_id":52332680872210,"sku":"CFR02493x1","price":9.6,"currency_code":"USD","in_stock":true},{"title":"8.5mm \/ 0.5mm \/ 300mm","offer_id":52332680904978,"sku":"CFR02500x1","price":9.1,"currency_code":"USD","in_stock":true},{"title":"9mm \/ 0.5mm \/ 300mm","offer_id":52332680937746,"sku":"CFR02505x1","price":11.18,"currency_code":"USD","in_stock":true},{"title":"9.5mm \/ 0.5mm \/ 300mm","offer_id":52332680970514,"sku":"CFR02511x1","price":10.04,"currency_code":"USD","in_stock":true},{"title":"10mm \/ 0.5mm \/ 300mm","offer_id":52332681003282,"sku":"CFR02517x1","price":10.2,"currency_code":"USD","in_stock":true},{"title":"10.5mm \/ 0.5mm \/ 300mm","offer_id":52332681036050,"sku":"CFR02525x1","price":11.02,"currency_code":"USD","in_stock":true},{"title":"11mm \/ 0.5mm \/ 300mm","offer_id":52332681068818,"sku":"CFR02529x1","price":11.14,"currency_code":"USD","in_stock":true},{"title":"12mm \/ 0.5mm \/ 300mm","offer_id":52332681101586,"sku":"CFR02538x1","price":11.45,"currency_code":"USD","in_stock":true},{"title":"12.5mm \/ 0.5mm \/ 300mm","offer_id":52332681134354,"sku":"CFR02545x1","price":13.49,"currency_code":"USD","in_stock":true},{"title":"13mm \/ 0.5mm \/ 300mm","offer_id":52332681167122,"sku":"CFR02546x1","price":11.72,"currency_code":"USD","in_stock":true},{"title":"13.5mm \/ 0.5mm \/ 300mm","offer_id":52332681199890,"sku":"CFR02550x1","price":13.14,"currency_code":"USD","in_stock":true},{"title":"14mm \/ 0.5mm \/ 300mm","offer_id":52332681232658,"sku":"CFR02551x1","price":12.04,"currency_code":"USD","in_stock":true},{"title":"14.2mm \/ 0.5mm \/ 300mm","offer_id":52332681265426,"sku":"CFR02552x1","price":13.38,"currency_code":"USD","in_stock":true},{"title":"15mm \/ 0.5mm \/ 300mm","offer_id":52332681298194,"sku":"CFR02557x1","price":10.85,"currency_code":"USD","in_stock":true},{"title":"16mm \/ 0.5mm \/ 300mm","offer_id":52332681330962,"sku":"CFR02563x1","price":13.23,"currency_code":"USD","in_stock":true},{"title":"17mm \/ 0.5mm \/ 300mm","offer_id":52332681363730,"sku":"CFR02568x1","price":13.56,"currency_code":"USD","in_stock":true},{"title":"18mm \/ 0.5mm \/ 300mm","offer_id":52332681396498,"sku":"CFR02572x1","price":13.84,"currency_code":"USD","in_stock":true},{"title":"19mm \/ 0.5mm \/ 300mm","offer_id":52332681429266,"sku":"CFR02577x1","price":12.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/Picture1of3_87ebb179-8e35-42c8-adb0-ea136067ffce.jpg?v=1781096944","url":"https:\/\/homediyer.com\/products\/brass-tube-pipe-300mm-05mm-wall-od-1-5-to-19mm","provider":"HomeDIYer","version":"1.0","type":"link"}