{"product_id":"copper-return-bend-end-feed-fitting-6mm-to-76mm","title":"Copper Return Bend End Feed Fitting — Φ6mm to Φ76mm U-Bend Plumbing Connector","description":"\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I choose the right pipe size and center distance?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Match the fitting's outer diameter (Φ) to your copper pipe's nominal outside diameter. The center distance determines how far apart the two parallel pipe runs will sit — for example, a 25mm center distance suits tightly spaced runs, while 200mm suits wider loops. When in doubt, measure the gap between your pipe centerlines before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What wall thickness should I choose?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Thicker walls (e.g., 1.5mm or 2.2mm) generally provide greater pressure tolerance and are preferred for heating systems or higher-pressure domestic water lines. Thinner walls (0.8mm–1mm) are typically sufficient for low-pressure or gravity-fed systems. Confirm with your system's pressure rating before selecting.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can these fittings be used outdoors or in corrosive environments?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Copper has naturally good corrosion resistance and is generally suitable for outdoor plumbing when properly installed and protected from mechanical damage. In highly acidic water conditions, consult a plumber before use.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Are these compatible with standard UK\/EU copper pipe sizes?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The metric sizes (6mm, 8mm, 10mm, 12mm, 16mm, 22mm, 28mm, 35mm, 42mm, 54mm, 67mm, 76mm) align with EN 1057 copper tube standards commonly used in the UK and EU. The 12.7mm, 19mm, 25.4mm sizes also correspond to common imperial-equivalent dimensions used in North America.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How are end feed fittings installed?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"End feed fittings are soldered (sweated) onto copper pipe. Clean the pipe end and fitting socket, apply flux, insert the pipe, and apply heat with a torch until solder flows into the joint by capillary action. Always follow local plumbing codes and safety guidelines when soldering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the pressure rating of these return bends?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Pressure ratings vary by pipe size and wall thickness. Copper end feed fittings typically handle working pressures of 10–16 bar for standard domestic plumbing applications. For exact ratings, contact us to confirm based on your selected size and wall thickness.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I use these for both hot and cold water systems?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Copper is suitable for both hot and cold water supply lines as well as central heating systems. It is generally rated for temperatures up to 110°C in standard plumbing applications.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n\n\u003cdiv class=\"hdiy-desc\"\u003e\n\n  \u003cdiv class=\"hdiy-overview\"\u003e\n    \u003ch2\u003eCopper Return Bend End Feed Fittings — Reliable U-Bend Connectors for Plumbing Loops\u003c\/h2\u003e\n    \u003cp\u003eWhen you need to reverse the direction of a copper pipe run — whether in a tight boiler cupboard, a radiator loop, or an underfloor heating circuit — a poorly fitted return bend can mean leaks, pressure drops, and costly rework. These end feed copper return bend fittings are designed for plumbers, heating engineers, and confident DIYers who need a clean, soldered U-bend connection that holds up under pressure.\u003c\/p\u003e\n    \u003cp\u003eEach fitting is a single-piece copper return bend (U-bend) with two end feed sockets. Available in pipe sizes from Φ6mm (≈1\/4\") to Φ76mm (≈3\"), with wall thicknesses ranging from 0.8mm to 2.2mm and center distances from 25mm (≈1\") to 200mm (≈7.9\") to suit different pipe spacing requirements. Sold individually or in packs of 2, 5, or 10 pieces for project and trade quantities.\u003c\/p\u003e\n    \u003cp\u003eTypical applications include domestic hot and cold water supply loops, central heating return circuits, solar thermal panel connections, and underfloor heating manifold runs — anywhere a copper-to-copper 180° directional change is needed with a soldered end feed joint.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-compat\"\u003e\n    \u003cspan class=\"hdiy-compat-icon\"\u003e🔵\u003c\/span\u003e\n    \u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for use with EN 1057 copper tube (metric sizes) and equivalent imperial-dimension copper pipe. Sizes from Φ6mm to Φ76mm. End feed sockets require soldering — not suitable for push-fit or compression systems without additional adapters.\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-note\"\u003e\n    \u003cspan class=\"hdiy-note-icon\"\u003e⚠️\u003c\/span\u003e\n    \u003cstrong\u003eNote:\u003c\/strong\u003e Center distance and wall thickness vary by size variant. Please confirm your pipe OD, required center distance, and system pressure rating before ordering. See variant options for full size details.\n  \u003c\/div\u003e\n\n  \u003ch2\u003e✅ Key Features of These Copper Return Bend End Feed Fittings\u003c\/h2\u003e\n  \u003cul class=\"hdiy-features\"\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔄\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e180° U-Bend Design\u003c\/strong\u003e — Provides a clean directional reversal in copper pipe runs, ideal for plumbing return loops and heating circuits where space-efficient routing is needed.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔥\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eEnd Feed Solder Sockets\u003c\/strong\u003e — Both ends accept standard capillary soldering, creating a leak-resistant, mechanically strong joint that meets typical domestic plumbing installation requirements.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📏\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eWide Size Range\u003c\/strong\u003e — Available from Φ6mm to Φ76mm outer diameter, covering small instrumentation lines up to large commercial pipe runs, with multiple wall thickness options per size.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🏗️\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ePrecise Center Distance Specification\u003c\/strong\u003e — Each variant lists the exact center-to-center distance (25mm–200mm), so you can match the fitting to your pipe spacing without guesswork or on-site modification.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🌡️\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eCopper Construction\u003c\/strong\u003e — Copper's thermal conductivity and corrosion resistance make these return bends suitable for hot and cold water supply, central heating, and solar thermal applications.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📦\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eFlexible Pack Quantities\u003c\/strong\u003e — Order 1, 2, 5, or 10 pieces per size to match your project scope, whether you need a single replacement fitting or a trade quantity for a full heating system installation.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003e📐 Technical Specifications — Copper Return Bend End Feed Fittings\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-table-wrap\"\u003e\n    \u003ctable\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003cth\u003eFitting Type\u003c\/th\u003e\n\u003ctd\u003eReturn Bend (U-Bend), End Feed\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eConnection Method\u003c\/th\u003e\n\u003ctd\u003eCapillary solder (end feed) — both ends\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCopper\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003ePipe Size Range (OD)\u003c\/th\u003e\n\u003ctd\u003eΦ6mm (≈1\/4\") to Φ76mm (≈3\")\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eWall Thickness Range\u003c\/th\u003e\n\u003ctd\u003e0.8mm to 2.2mm (see variant options)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCenter Distance Range\u003c\/th\u003e\n\u003ctd\u003e25mm (≈1\") to 200mm (≈7.9\") (see variant options)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eBend Angle\u003c\/th\u003e\n\u003ctd\u003e180°\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCompatible Pipe Standard\u003c\/th\u003e\n\u003ctd\u003eEN 1057 copper tube (metric); imperial-equivalent sizes available\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eSuitable Applications\u003c\/th\u003e\n\u003ctd\u003eHot \u0026amp; cold water supply, central heating, solar thermal, underfloor heating\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eTemperature Rating\u003c\/th\u003e\n\u003ctd\u003eTypically up to 110°C for standard plumbing use\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003ePressure Rating\u003c\/th\u003e\n\u003ctd\u003eContact us to confirm by size and wall thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003ePack Quantities Available\u003c\/th\u003e\n\u003ctd\u003e1 Pcs, 2 Pcs, 5 Pcs, 10 Pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eNatural copper\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-faq\"\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I choose the right pipe size and center distance?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eMatch the fitting's outer diameter (Φ) to your copper pipe's nominal outside diameter. The center distance determines how far apart the two parallel pipe runs will sit — for example, a 25mm (≈1\") center distance suits tightly spaced runs, while 200mm (≈7.9\") suits wider loops. Measure the gap between your pipe centerlines before ordering to select the correct variant.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat wall thickness should I choose for my system?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eThicker walls (e.g., 1.5mm or 2.2mm) generally provide greater pressure tolerance and are preferred for central heating systems or higher-pressure domestic water lines. Thinner walls (0.8mm–1mm) are typically sufficient for low-pressure or gravity-fed systems. Confirm with your system's pressure rating before selecting a variant.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat is the pressure rating of these copper return bends?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eCopper end feed fittings typically handle working pressures of 10–16 bar for standard domestic plumbing applications, though the exact rating varies by pipe size and wall thickness. For specific pressure requirements, please contact us with your selected size and wall thickness to confirm suitability.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan these fittings be used outdoors or in corrosive environments?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eCopper has naturally good corrosion resistance and is generally suitable for outdoor plumbing installations when properly installed and protected from mechanical damage. In areas with highly acidic water (low pH), consult a qualified plumber before use, as acidic water can accelerate copper corrosion over time.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eAre these compatible with standard UK and EU copper pipe sizes?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eYes. The metric sizes (6mm, 8mm, 10mm, 12mm, 16mm, 22mm, 28mm, 35mm, 42mm, 54mm, 67mm, 76mm) align with EN 1057 copper tube standards commonly used in the UK and EU. The 12.7mm, 19mm, and 25.4mm sizes also correspond to common imperial-equivalent dimensions used in North America. If you are unsure, check your pipe's outside diameter with calipers before ordering.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow are end feed fittings installed — do I need special tools?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eEnd feed fittings are soldered (sweated) onto copper pipe using a torch, flux, and solder. Clean the pipe end and fitting socket with emery cloth, apply flux, insert the pipe fully into the socket, and apply heat until solder flows into the joint by capillary action. You will need a plumber's torch, lead-free solder, and flux. Always follow local plumbing codes and safety guidelines when soldering.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan I use these for both hot and cold water systems?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eYes. Copper is suitable for both hot and cold water supply lines as well as central heating and solar thermal systems. It is generally rated for temperatures up to approximately 110°C in standard plumbing applications, making it compatible with most domestic heating circuits.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I convert between mm and inch pipe sizes?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eCommon conversions for reference: 6mm ≈ 1\/4\", 8mm ≈ 5\/16\", 10mm ≈ 3\/8\", 12.7mm = 1\/2\", 15mm ≈ 9\/16\" (note: 15mm metric ≠ 1\/2\" nominal in all standards), 19mm ≈ 3\/4\", 22mm ≈ 7\/8\", 25.4mm = 1\", 28mm ≈ 1-1\/8\", 35mm ≈ 1-3\/8\", 42mm ≈ 1-5\/8\", 54mm ≈ 2-1\/8\", 67mm ≈ 2-5\/8\", 76mm ≈ 3\". Always verify with your pipe's actual outside diameter measurement.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-cta\"\u003e\n    🛒 Select your pipe size and pack quantity above, then add to cart — ships from our US warehouse.\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"HomeDIYer","offers":[{"title":"Φ6mm x 0.8mm Wall Thick\u002625mm Center Distance \/ 1 Pcs","offer_id":52335650275602,"sku":"GYZKJGY-NFZL-255490x1","price":2.03,"currency_code":"USD","in_stock":true},{"title":"Φ8mm x 0.8mm Wall Thick\u002625mm Center Distance \/ 1 Pcs","offer_id":52335650308370,"sku":"GYZKJGY-NFZL-255491x1","price":3.21,"currency_code":"USD","in_stock":true},{"title":"Φ10mm x 0.8mm Wall Thick\u002625mm Center Distance \/ 1 Pcs","offer_id":52335650341138,"sku":"GYZKJGY-NFZL-255492x1","price":3.33,"currency_code":"USD","in_stock":true},{"title":"Φ12.7mm x 0.8mm Wall Thick\u002636mm Center Distance \/ 1 Pcs","offer_id":52335650373906,"sku":"GYZKJGY-NFZL-255493x1","price":3.81,"currency_code":"USD","in_stock":true},{"title":"Φ16mm x 1mm Wall Thick\u002648mm Center Distance \/ 1 Pcs","offer_id":52335650406674,"sku":"GYZKJGY-NFZL-255494x1","price":5.07,"currency_code":"USD","in_stock":true},{"title":"Φ19mm x 1mm Wall Thick\u002643mm Center Distance \/ 1 Pcs","offer_id":52335650439442,"sku":"GYZKJGY-NFZL-255495x1","price":5.62,"currency_code":"USD","in_stock":true},{"title":"Φ19mm x 1mm Wall Thick\u002650mm Center Distance \/ 1 Pcs","offer_id":52335650472210,"sku":"GYZKJGY-NFZL-255496x1","price":6.3,"currency_code":"USD","in_stock":true},{"title":"Φ19mm x 1.1mm Wall Thick\u002660mm Center Distance \/ 1 Pcs","offer_id":52335650504978,"sku":"GYZKJGY-NFZL-255497x1","price":6.3,"currency_code":"USD","in_stock":true},{"title":"Φ22mm x 1mm Wall Thick\u002670mm Center Distance \/ 1 Pcs","offer_id":52335650537746,"sku":"GYZKJGY-NFZL-255498x1","price":7.86,"currency_code":"USD","in_stock":true},{"title":"Φ25.4mm x 1mm Wall Thick\u002676mm Center Distance \/ 1 Pcs","offer_id":52335650570514,"sku":"GYZKJGY-NFZL-255499x1","price":9.18,"currency_code":"USD","in_stock":true},{"title":"Φ25.4mm x 1.5mm Wall Thick\u002676mm Center Distance \/ 1 Pcs","offer_id":52335650603282,"sku":"GYZKJGY-NFZL-255500x1","price":12.89,"currency_code":"USD","in_stock":true},{"title":"Φ28.6mm x 1mm Wall Thick\u002692mm Center Distance \/ 1 Pcs","offer_id":52335650636050,"sku":"GYZKJGY-NFZL-255501x1","price":10.92,"currency_code":"USD","in_stock":true},{"title":"Φ28.6mm x 1.5mm Wall Thick\u002692mm Center Distance \/ 1 Pcs","offer_id":52335650668818,"sku":"GYZKJGY-NFZL-255502x1","price":15.48,"currency_code":"USD","in_stock":true},{"title":"Φ32mm x 1.2mm Wall Thick\u0026110mm Center Distance \/ 1 Pcs","offer_id":52335650701586,"sku":"GYZKJGY-NFZL-255503x1","price":16.5,"currency_code":"USD","in_stock":true},{"title":"Φ32mm x 1.5mm Wall Thick\u0026110mm Center Distance \/ 1 Pcs","offer_id":52335650734354,"sku":"GYZKJGY-NFZL-255504x1","price":20.44,"currency_code":"USD","in_stock":true},{"title":"Φ35mm x 1.2mm Wall Thick\u0026110mm Center Distance \/ 1 Pcs","offer_id":52335650767122,"sku":"GYZKJGY-NFZL-255505x1","price":18.67,"currency_code":"USD","in_stock":true},{"title":"Φ35mm x 1.5mm Wall Thick\u0026110mm Center Distance \/ 1 Pcs","offer_id":52335650799890,"sku":"GYZKJGY-NFZL-255506x1","price":22.75,"currency_code":"USD","in_stock":true},{"title":"Φ38mm x 1.3mm Wall Thick\u0026111mm Center Distance \/ 1 Pcs","offer_id":52335650832658,"sku":"GYZKJGY-NFZL-255507x1","price":19.99,"currency_code":"USD","in_stock":true},{"title":"Φ38mm x 1.5mm Wall Thick\u0026111mm Center Distance \/ 1 Pcs","offer_id":52335650865426,"sku":"GYZKJGY-NFZL-255508x1","price":24.82,"currency_code":"USD","in_stock":true},{"title":"Φ42mm x 1.5mm Wall Thick\u002692mm Center Distance \/ 1 Pcs","offer_id":52335650898194,"sku":"GYZKJGY-NFZL-255509x1","price":24.25,"currency_code":"USD","in_stock":true},{"title":"Φ45mm x 1.5mm Wall Thick\u0026115mm Center Distance \/ 1 Pcs","offer_id":52335650930962,"sku":"GYZKJGY-NFZL-255510x1","price":30.45,"currency_code":"USD","in_stock":true},{"title":"Φ50mm x 1.5mm Wall Thick\u0026152mm Center Distance \/ 1 Pcs","offer_id":52335650963730,"sku":"GYZKJGY-NFZL-255511x1","price":43.63,"currency_code":"USD","in_stock":true},{"title":"Φ54mm x 1.5mm Wall Thick\u0026155mm Center Distance \/ 1 Pcs","offer_id":52335650996498,"sku":"GYZKJGY-NFZL-255512x1","price":45.91,"currency_code":"USD","in_stock":true},{"title":"Φ67mm x 1.8mm Wall Thick\u0026180mm Center Distance \/ 1 Pcs","offer_id":52335651029266,"sku":"GYZKJGY-NFZL-255513x1","price":74.64,"currency_code":"USD","in_stock":true},{"title":"Φ76mm x 2.2mm Wall Thick\u0026200mm Center Distance \/ 1 Pcs","offer_id":52335651062034,"sku":"GYZKJGY-NFZL-255514x1","price":119.34,"currency_code":"USD","in_stock":true},{"title":"Φ6mm x 0.8mm Wall Thick\u002625mm Center Distance \/ 2 Pcs","offer_id":52335651094802,"sku":"GYZKJGY-NFZL-255490x2","price":4.15,"currency_code":"USD","in_stock":true},{"title":"Φ8mm x 0.8mm Wall Thick\u002625mm Center Distance \/ 2 Pcs","offer_id":52335651127570,"sku":"GYZKJGY-NFZL-255491x2","price":4.47,"currency_code":"USD","in_stock":true},{"title":"Φ10mm x 0.8mm Wall Thick\u002625mm Center Distance \/ 2 Pcs","offer_id":52335651160338,"sku":"GYZKJGY-NFZL-255492x2","price":4.8,"currency_code":"USD","in_stock":true},{"title":"Φ12.7mm x 0.8mm Wall Thick\u002636mm Center Distance \/ 2 Pcs","offer_id":52335651193106,"sku":"GYZKJGY-NFZL-255493x2","price":5.82,"currency_code":"USD","in_stock":true},{"title":"Φ16mm x 1mm Wall Thick\u002648mm Center Distance \/ 2 Pcs","offer_id":52335651225874,"sku":"GYZKJGY-NFZL-255494x2","price":8.28,"currency_code":"USD","in_stock":true},{"title":"Φ19mm x 1mm Wall Thick\u002643mm Center Distance \/ 2 Pcs","offer_id":52335651258642,"sku":"GYZKJGY-NFZL-255495x2","price":9.38,"currency_code":"USD","in_stock":true},{"title":"Φ19mm x 1mm Wall Thick\u002650mm Center Distance \/ 2 Pcs","offer_id":52335651291410,"sku":"GYZKJGY-NFZL-255496x2","price":10.78,"currency_code":"USD","in_stock":true},{"title":"Φ19mm x 1.1mm Wall Thick\u002660mm Center Distance \/ 2 Pcs","offer_id":52335651324178,"sku":"GYZKJGY-NFZL-255497x2","price":10.78,"currency_code":"USD","in_stock":true},{"title":"Φ22mm x 1mm Wall Thick\u002670mm Center Distance \/ 2 Pcs","offer_id":52335651356946,"sku":"GYZKJGY-NFZL-255498x2","price":13.87,"currency_code":"USD","in_stock":true},{"title":"Φ25.4mm x 1mm Wall Thick\u002676mm Center Distance \/ 2 Pcs","offer_id":52335651389714,"sku":"GYZKJGY-NFZL-255499x2","price":16.52,"currency_code":"USD","in_stock":true},{"title":"Φ25.4mm x 1.5mm Wall Thick\u002676mm Center Distance \/ 2 Pcs","offer_id":52335651422482,"sku":"GYZKJGY-NFZL-255500x2","price":23.98,"currency_code":"USD","in_stock":true},{"title":"Φ6mm x 0.8mm Wall Thick\u002625mm Center Distance \/ 5 Pcs","offer_id":52335651455250,"sku":"GYZKJGY-NFZL-255490x5","price":7.62,"currency_code":"USD","in_stock":true},{"title":"Φ8mm x 0.8mm Wall Thick\u002625mm Center Distance \/ 5 Pcs","offer_id":52335651488018,"sku":"GYZKJGY-NFZL-255491x5","price":8.47,"currency_code":"USD","in_stock":true},{"title":"Φ10mm x 0.8mm Wall Thick\u002625mm Center Distance \/ 5 Pcs","offer_id":52335651520786,"sku":"GYZKJGY-NFZL-255492x5","price":9.29,"currency_code":"USD","in_stock":true},{"title":"Φ12.7mm x 0.8mm Wall Thick\u002636mm Center Distance \/ 5 Pcs","offer_id":52335651553554,"sku":"GYZKJGY-NFZL-255493x5","price":11.76,"currency_code":"USD","in_stock":true},{"title":"Φ16mm x 1mm Wall Thick\u002648mm Center Distance \/ 5 Pcs","offer_id":52335651586322,"sku":"GYZKJGY-NFZL-255494x5","price":17.99,"currency_code":"USD","in_stock":true},{"title":"Φ19mm x 1mm Wall Thick\u002643mm Center Distance \/ 5 Pcs","offer_id":52335651619090,"sku":"GYZKJGY-NFZL-255495x5","price":20.71,"currency_code":"USD","in_stock":true},{"title":"Φ19mm x 1mm Wall Thick\u002650mm Center Distance \/ 5 Pcs","offer_id":52335651651858,"sku":"GYZKJGY-NFZL-255496x5","price":24.18,"currency_code":"USD","in_stock":true},{"title":"Φ19mm x 1.1mm Wall Thick\u002660mm Center Distance \/ 5 Pcs","offer_id":52335651684626,"sku":"GYZKJGY-NFZL-255497x5","price":24.18,"currency_code":"USD","in_stock":true},{"title":"Φ22mm x 1mm Wall Thick\u002670mm Center Distance \/ 5 Pcs","offer_id":52335651717394,"sku":"GYZKJGY-NFZL-255498x5","price":31.96,"currency_code":"USD","in_stock":true},{"title":"Φ25.4mm x 1mm Wall Thick\u002676mm Center Distance \/ 5 Pcs","offer_id":52335651750162,"sku":"GYZKJGY-NFZL-255499x5","price":38.6,"currency_code":"USD","in_stock":true},{"title":"Φ25.4mm x 1.5mm Wall Thick\u002676mm Center Distance \/ 5 Pcs","offer_id":52335651782930,"sku":"GYZKJGY-NFZL-255500x5","price":57.19,"currency_code":"USD","in_stock":true},{"title":"Φ6mm x 0.8mm Wall Thick\u002625mm Center Distance \/ 10 Pcs","offer_id":52335651815698,"sku":"GYZKJGY-NFZL-255490x10","price":13.41,"currency_code":"USD","in_stock":true},{"title":"Φ8mm x 0.8mm Wall Thick\u002625mm Center Distance \/ 10 Pcs","offer_id":52335651848466,"sku":"GYZKJGY-NFZL-255491x10","price":15.14,"currency_code":"USD","in_stock":true},{"title":"Φ10mm x 0.8mm Wall Thick\u002625mm Center Distance \/ 10 Pcs","offer_id":52335651881234,"sku":"GYZKJGY-NFZL-255492x10","price":16.73,"currency_code":"USD","in_stock":true},{"title":"Φ12.7mm x 0.8mm Wall Thick\u002636mm Center Distance \/ 10 Pcs","offer_id":52335651914002,"sku":"GYZKJGY-NFZL-255493x10","price":21.73,"currency_code":"USD","in_stock":true},{"title":"Φ16mm x 1mm Wall Thick\u002648mm Center Distance \/ 10 Pcs","offer_id":52335651946770,"sku":"GYZKJGY-NFZL-255494x10","price":34.12,"currency_code":"USD","in_stock":true},{"title":"Φ19mm x 1mm Wall Thick\u002643mm Center Distance \/ 10 Pcs","offer_id":52335651979538,"sku":"GYZKJGY-NFZL-255495x10","price":39.62,"currency_code":"USD","in_stock":true},{"title":"Φ19mm x 1mm Wall Thick\u002650mm Center Distance \/ 10 Pcs","offer_id":52335652012306,"sku":"GYZKJGY-NFZL-255496x10","price":46.51,"currency_code":"USD","in_stock":true},{"title":"Φ19mm x 1.1mm Wall Thick\u002660mm Center Distance \/ 10 Pcs","offer_id":52335652045074,"sku":"GYZKJGY-NFZL-255497x10","price":46.51,"currency_code":"USD","in_stock":true},{"title":"Φ22mm x 1mm Wall Thick\u002670mm Center Distance \/ 10 Pcs","offer_id":52335652077842,"sku":"GYZKJGY-NFZL-255498x10","price":62.08,"currency_code":"USD","in_stock":true},{"title":"Φ25.4mm x 1mm Wall Thick\u002676mm Center Distance \/ 10 Pcs","offer_id":52335652110610,"sku":"GYZKJGY-NFZL-255499x10","price":75.38,"currency_code":"USD","in_stock":true},{"title":"Φ25.4mm x 1.5mm Wall Thick\u002676mm Center Distance \/ 10 Pcs","offer_id":52335652143378,"sku":"GYZKJGY-NFZL-255500x10","price":112.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/Picture9of9_95ba2e6f-c9fb-4ebc-8694-8a39315e970b.jpg?v=1781079892","url":"https:\/\/homediyer.com\/products\/copper-return-bend-end-feed-fitting-6mm-to-76mm","provider":"HomeDIYer","version":"1.0","type":"link"}