{"product_id":"gt2-timing-belt-6mm-width-power-drive-belt-closed-rubber","title":"GT2 Timing Belt 6 mm Width Power Drive Belt 100 mm - 1220 mm Closed Rubber Belts","description":"\u003cdiv class=\"hdiy-desc\"\u003e\n\n\u003cdiv class=\"hdiy-overview\"\u003e\n\u003ch2\u003eGT2 Closed-Loop Rubber Timing Belt — Precise Power Transmission for Makers and Builders\u003c\/h2\u003e\n\u003cp\u003eWhen your 3D printer skips steps or your CNC axis loses position, the culprit is often a worn or mismatched drive belt. Makers, robotics engineers, and workshop builders who demand repeatable motion need a GT2 timing belt they can rely on. This 6 mm wide closed-loop rubber belt is engineered for consistent tooth engagement and minimal backlash, keeping your motion system on track run after run.\u003c\/p\u003e\n\u003cp\u003eEach belt is a continuous closed-loop construction made from neoprene rubber with fiberglass cord reinforcement, delivering flexibility without stretch under load. The belt width is 6 mm (approximately 0.24 in), with a 2 mm (0.079 in) GT2 tooth pitch. Available loop lengths range from 100 mm (3.94 in) to 1225 mm (48.2 in), covering a wide span of machine frame sizes and drive configurations.\u003c\/p\u003e\n\u003cp\u003eTypical applications include FDM 3D printer X\/Y axis drives, desktop CNC router feed systems, and lightweight robotic arm joint drives — anywhere a GT2 closed-loop timing belt for 3D printer or CNC linear motion is required. The standardized GT2 profile also makes these belts a direct replacement for worn belts in RepRap-style printers and laser engravers.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"hdiy-compat\"\u003e\n\u003cspan class=\"hdiy-compat-icon\"\u003e⚙️\u003c\/span\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits standard GT2 pulleys with 2 mm tooth pitch. Verify your pulley bore, tooth count, and belt loop length before ordering. Belt width: 6 mm.\n\u003c\/div\u003e\n\n\u003cdiv class=\"hdiy-features\"\u003e\n\u003ch2\u003e✅ Key Features of These GT2 Closed-Loop Rubber Timing Belts\u003c\/h2\u003e\n\u003cul class=\"hdiy-list\"\u003e\n\u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📐\u003c\/span\u003e\u003cstrong\u003e2 mm GT2 Tooth Pitch\u003c\/strong\u003e — Standardized GT2 profile ensures accurate tooth meshing with GT2 pulleys, minimizing positional error in motion systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📏\u003c\/span\u003e\u003cstrong\u003e6 mm Belt Width\u003c\/strong\u003e — Compact 6 mm (0.24 in) width fits narrow pulley grooves common in desktop 3D printers and small CNC machines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔄\u003c\/span\u003e\u003cstrong\u003eClosed-Loop Construction\u003c\/strong\u003e — Seamless loop eliminates splice points that can cause vibration or failure, delivering smooth, uninterrupted power transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🧱\u003c\/span\u003e\u003cstrong\u003eNeoprene Rubber with Fiberglass Reinforcement\u003c\/strong\u003e — Flexible neoprene body resists cracking under repeated flexing; fiberglass cord core limits elongation under tension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📦\u003c\/span\u003e\u003cstrong\u003eMultiple Length Options\u003c\/strong\u003e — Available in 22 loop lengths from 100 mm to 1225 mm, sold in 1, 5, or 10-piece quantities to suit prototyping or production needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔧\u003c\/span\u003e\u003cstrong\u003eDirect Replacement Fit\u003c\/strong\u003e — Drop-in replacement for GT2 belts in RepRap, Prusa-style, Ender-series, and similar open-frame 3D printers and laser engravers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"hdiy-table-wrap\"\u003e\n\u003ch2\u003e📐 Technical Specifications — GT2 Timing Belt\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBelt Type\u003c\/th\u003e\n\u003ctd\u003eGT2 Closed-Loop Timing Belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBelt Width\u003c\/th\u003e\n\u003ctd\u003e6 mm (0.24 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTooth Pitch\u003c\/th\u003e\n\u003ctd\u003e2 mm (0.079 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTooth Profile\u003c\/th\u003e\n\u003ctd\u003eGT2 (curvilinear)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoop Length Range\u003c\/th\u003e\n\u003ctd\u003e100 mm – 1225 mm (3.94 in – 48.2 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eNeoprene rubber with fiberglass cord reinforcement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSeamless closed loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Pulley Pitch\u003c\/th\u003e\n\u003ctd\u003e2 mm GT2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity Options\u003c\/th\u003e\n\u003ctd\u003e1 PCS \/ 5 PCS \/ 10 PCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating Temperature\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax Tension\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"hdiy-faq\"\u003e\n\u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow do I choose the correct loop length for my machine?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eMeasure the center-to-center distance between your two GT2 pulleys, then calculate the required belt loop length using the formula: Loop Length ≈ 2 × center distance + (π × pulley pitch diameter). Most 3D printer manufacturers publish the required belt length in their build documentation. When in doubt, select the next size up and adjust idler tension accordingly.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs this belt compatible with my 3D printer or CNC machine?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eThese belts use the standard GT2 tooth profile with a 2 mm pitch and 6 mm width, which is compatible with the vast majority of desktop FDM 3D printers (including Ender, Prusa, Anet, and similar RepRap-style machines) and small CNC routers that specify GT2 6mm belts. Always confirm your machine's required belt width and loop length before ordering.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between GT2 and other timing belt profiles (e.g., MXL, T2.5)?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eGT2 refers to a curvilinear (rounded) tooth profile with a 2 mm pitch. Compared to trapezoidal profiles like MXL or T2.5, the GT2 profile offers lower backlash and quieter operation at the speeds typical of 3D printer and light CNC applications. GT2 pulleys and belts are not interchangeable with MXL or T2.5 components.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow strong is this belt — will it stretch under normal use?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eThe fiberglass cord reinforcement in the belt core significantly limits elongation under the tension loads typical of desktop 3D printers and small CNC machines. Under normal operating tension, stretch is minimal. Avoid over-tensioning, which can accelerate wear on both the belt and pulley bearings.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eIs the belt resistant to heat or chemicals in a workshop environment?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eNeoprene rubber offers moderate resistance to oils, greases, and mild chemicals commonly found in workshop environments. It performs reliably across the temperature range typical of indoor 3D printing and CNC use. Avoid prolonged exposure to strong solvents or extreme heat sources beyond normal machine operating conditions.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eShould I buy 1 PCS, 5 PCS, or 10 PCS?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eIf you are replacing a single worn belt on one machine, the 1 PCS option is sufficient. The 5 PCS pack is a practical choice for makers who run multiple machines or want spares on hand for quick maintenance. The 10 PCS pack offers the best per-unit value for workshops, makerspaces, or small production environments that perform regular belt replacements.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eCan I use this belt for a laser engraver or robotic arm?\u003c\/summary\u003e\n\u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eYes. GT2 6mm closed-loop belts are widely used in desktop laser engravers (such as those using the same motion platform as common FDM printers) and in lightweight robotic arm joints where precise angular positioning is needed. Confirm the required loop length and pulley tooth count for your specific application before ordering.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"hdiy-cta\"\u003e\n🛒 Select your belt model (loop length) and quantity above, then add to cart.\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I choose the correct loop length for my machine?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Measure the center-to-center distance between your two GT2 pulleys, then calculate the required belt loop length using the formula: Loop Length ≈ 2 × center distance + (π × pulley pitch diameter). Most 3D printer manufacturers publish the required belt length in their build documentation. When in doubt, select the next size up and adjust idler tension accordingly.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is this belt compatible with my 3D printer or CNC machine?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"These belts use the standard GT2 tooth profile with a 2 mm pitch and 6 mm width, which is compatible with the vast majority of desktop FDM 3D printers (including Ender, Prusa, Anet, and similar RepRap-style machines) and small CNC routers that specify GT2 6mm belts. Always confirm your machine's required belt width and loop length before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the difference between GT2 and other timing belt profiles (e.g., MXL, T2.5)?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"GT2 refers to a curvilinear (rounded) tooth profile with a 2 mm pitch. Compared to trapezoidal profiles like MXL or T2.5, the GT2 profile offers lower backlash and quieter operation at the speeds typical of 3D printer and light CNC applications. GT2 pulleys and belts are not interchangeable with MXL or T2.5 components.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How strong is this belt — will it stretch under normal use?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The fiberglass cord reinforcement in the belt core significantly limits elongation under the tension loads typical of desktop 3D printers and small CNC machines. Under normal operating tension, stretch is minimal. Avoid over-tensioning, which can accelerate wear on both the belt and pulley bearings.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is the belt resistant to heat or chemicals in a workshop environment?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Neoprene rubber offers moderate resistance to oils, greases, and mild chemicals commonly found in workshop environments. It performs reliably across the temperature range typical of indoor 3D printing and CNC use. Avoid prolonged exposure to strong solvents or extreme heat sources beyond normal machine operating conditions.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Should I buy 1 PCS, 5 PCS, or 10 PCS?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"If you are replacing a single worn belt on one machine, the 1 PCS option is sufficient. The 5 PCS pack is a practical choice for makers who run multiple machines or want spares on hand for quick maintenance. The 10 PCS pack offers the best per-unit value for workshops, makerspaces, or small production environments that perform regular belt replacements.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I use this belt for a laser engraver or robotic arm?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. GT2 6mm closed-loop belts are widely used in desktop laser engravers and in lightweight robotic arm joints where precise angular positioning is needed. Confirm the required loop length and pulley tooth count for your specific application before ordering.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"HomeDIYer","offers":[{"title":"6 mm \/ 2GT - 140 mm \/ 1 PCS","offer_id":52368476668178,"sku":"GYJLTBJT00700x1","price":4.07,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 100 mm \/ 1 PCS","offer_id":52368476700946,"sku":"GYJLTBJT00701x1","price":4.2,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 110 mm \/ 1 PCS","offer_id":52368476733714,"sku":"GYJLTBJT00711x1","price":4.2,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 112 mm \/ 1 PCS","offer_id":52368476766482,"sku":"GYJLTBJT00699x1","price":4.2,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 122 mm \/ 1 PCS","offer_id":52368476799250,"sku":"GYJLTBJT00715x1","price":4.2,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 124 mm \/ 1 PCS","offer_id":52368476832018,"sku":"GYJLTBJT00703x1","price":4.2,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 158 mm \/ 1 PCS","offer_id":52368476864786,"sku":"GYJLTBJT00704x1","price":4.34,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 160 mm \/ 1 PCS","offer_id":52368476897554,"sku":"GYJLTBJT00716x1","price":4.47,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 180 mm \/ 1 PCS","offer_id":52368476930322,"sku":"GYJLTBJT00697x1","price":4.61,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 188 mm \/ 1 PCS","offer_id":52368476963090,"sku":"GYJLTBJT00707x1","price":4.61,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 190 mm \/ 1 PCS","offer_id":52368476995858,"sku":"GYJLTBJT00714x1","price":4.69,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 200 mm \/ 1 PCS","offer_id":52368477028626,"sku":"GYJLTBJT00712x1","price":4.69,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 220 mm \/ 1 PCS","offer_id":52368477061394,"sku":"GYJLTBJT00705x1","price":4.88,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 232 mm \/ 1 PCS","offer_id":52368477094162,"sku":"GYJLTBJT00695x1","price":5.1,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 280 mm \/ 1 PCS","offer_id":52368477126930,"sku":"GYJLTBJT00698x1","price":5.24,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 300 mm \/ 1 PCS","offer_id":52368477159698,"sku":"GYJLTBJT00709x1","price":5.56,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 610 mm \/ 1 PCS","offer_id":52368477192466,"sku":"GYJLTBJT00696x1","price":7.47,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 616 mm \/ 1 PCS","offer_id":52368477225234,"sku":"GYJLTBJT00706x1","price":7.74,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 752 mm \/ 1 PCS","offer_id":52368477258002,"sku":"GYJLTBJT00702x1","price":7.74,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 852 mm \/ 1 PCS","offer_id":52368477290770,"sku":"GYJLTBJT00708x1","price":7.87,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 1220 mm \/ 1 PCS","offer_id":52368477323538,"sku":"GYJLTBJT00713x1","price":8.28,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 1225 mm \/ 1 PCS","offer_id":52368477356306,"sku":"GYJLTBJT00710x1","price":8.77,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 140 mm \/ 5 PCS","offer_id":52368477389074,"sku":"GYJLTBJT00700x5","price":10.13,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 100 mm \/ 5 PCS","offer_id":52368477421842,"sku":"GYJLTBJT00701x5","price":10.13,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 110 mm \/ 5 PCS","offer_id":52368477454610,"sku":"GYJLTBJT00711x5","price":10.13,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 112 mm \/ 5 PCS","offer_id":52368477487378,"sku":"GYJLTBJT00699x5","price":10.13,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 122 mm \/ 5 PCS","offer_id":52368477520146,"sku":"GYJLTBJT00715x5","price":10.13,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 124 mm \/ 5 PCS","offer_id":52368477552914,"sku":"GYJLTBJT00703x5","price":10.13,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 158 mm \/ 5 PCS","offer_id":52368477585682,"sku":"GYJLTBJT00704x5","price":11.14,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 160 mm \/ 5 PCS","offer_id":52368477618450,"sku":"GYJLTBJT00716x5","price":11.68,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 180 mm \/ 5 PCS","offer_id":52368477651218,"sku":"GYJLTBJT00697x5","price":12.23,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 188 mm \/ 5 PCS","offer_id":52368477683986,"sku":"GYJLTBJT00707x5","price":12.5,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 190 mm \/ 5 PCS","offer_id":52368477716754,"sku":"GYJLTBJT00714x5","price":12.77,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 200 mm \/ 5 PCS","offer_id":52368477749522,"sku":"GYJLTBJT00712x5","price":12.77,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 220 mm \/ 5 PCS","offer_id":52368477782290,"sku":"GYJLTBJT00705x5","price":13.8,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 232 mm \/ 5 PCS","offer_id":52368477815058,"sku":"GYJLTBJT00695x5","price":14.62,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 280 mm \/ 5 PCS","offer_id":52368477847826,"sku":"GYJLTBJT00698x5","price":15.35,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 300 mm \/ 5 PCS","offer_id":52368477880594,"sku":"GYJLTBJT00709x5","price":17.26,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 610 mm \/ 5 PCS","offer_id":52368477913362,"sku":"GYJLTBJT00696x5","price":26.72,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 616 mm \/ 5 PCS","offer_id":52368477946130,"sku":"GYJLTBJT00706x5","price":28.08,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 752 mm \/ 5 PCS","offer_id":52368477978898,"sku":"GYJLTBJT00702x5","price":28.76,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 852 mm \/ 5 PCS","offer_id":52368478011666,"sku":"GYJLTBJT00708x5","price":29.58,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 1220 mm \/ 5 PCS","offer_id":52368478044434,"sku":"GYJLTBJT00713x5","price":32.49,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 1225 mm \/ 5 PCS","offer_id":52368478077202,"sku":"GYJLTBJT00710x5","price":35.21,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 140 mm \/ 10 PCS","offer_id":52368478109970,"sku":"GYJLTBJT00700x10","price":17.53,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 100 mm \/ 10 PCS","offer_id":52368478142738,"sku":"GYJLTBJT00701x10","price":17.53,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 110 mm \/ 10 PCS","offer_id":52368478175506,"sku":"GYJLTBJT00711x10","price":17.53,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 112 mm \/ 10 PCS","offer_id":52368478208274,"sku":"GYJLTBJT00699x10","price":17.53,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 122 mm \/ 10 PCS","offer_id":52368478241042,"sku":"GYJLTBJT00715x10","price":17.53,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 124 mm \/ 10 PCS","offer_id":52368478273810,"sku":"GYJLTBJT00703x10","price":17.53,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 158 mm \/ 10 PCS","offer_id":52368478306578,"sku":"GYJLTBJT00704x10","price":19.65,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 160 mm \/ 10 PCS","offer_id":52368478339346,"sku":"GYJLTBJT00716x10","price":20.66,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 180 mm \/ 10 PCS","offer_id":52368478372114,"sku":"GYJLTBJT00697x10","price":21.75,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 188 mm \/ 10 PCS","offer_id":52368478404882,"sku":"GYJLTBJT00707x10","price":22.29,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 190 mm \/ 10 PCS","offer_id":52368478437650,"sku":"GYJLTBJT00714x10","price":22.83,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 200 mm \/ 10 PCS","offer_id":52368478470418,"sku":"GYJLTBJT00712x10","price":22.83,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 220 mm \/ 10 PCS","offer_id":52368478503186,"sku":"GYJLTBJT00705x10","price":24.96,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 232 mm \/ 10 PCS","offer_id":52368478535954,"sku":"GYJLTBJT00695x10","price":26.51,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 280 mm \/ 10 PCS","offer_id":52368478568722,"sku":"GYJLTBJT00698x10","price":28.14,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 300 mm \/ 10 PCS","offer_id":52368478601490,"sku":"GYJLTBJT00709x10","price":32.03,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 610 mm \/ 10 PCS","offer_id":52368478634258,"sku":"GYJLTBJT00696x10","price":52.35,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 616 mm \/ 10 PCS","offer_id":52368478667026,"sku":"GYJLTBJT00706x10","price":55.07,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 752 mm \/ 10 PCS","offer_id":52368478699794,"sku":"GYJLTBJT00702x10","price":56.43,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 852 mm \/ 10 PCS","offer_id":52368478732562,"sku":"GYJLTBJT00708x10","price":58.06,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 1220 mm \/ 10 PCS","offer_id":52368478765330,"sku":"GYJLTBJT00713x10","price":63.91,"currency_code":"USD","in_stock":true},{"title":"6 mm \/ 2GT - 1225 mm \/ 10 PCS","offer_id":52368478798098,"sku":"GYJLTBJT00710x10","price":69.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/Picture1of8_a049ea11-54f3-4936-8246-8b45b98f54ba.jpg?v=1781591943","url":"https:\/\/homediyer.com\/products\/gt2-timing-belt-6mm-width-power-drive-belt-closed-rubber","provider":"HomeDIYer","version":"1.0","type":"link"}