{"product_id":"htd-8m-timing-belt-20mm-wide","title":"HTD 8M Timing Belt — 20mm Wide Closed Loop Rubber Drive Belt (8mm Pitch, Multiple Lengths)","description":"\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I choose the right belt length?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Measure the center-to-center distance between your two pulleys, then calculate: Belt Length = 2 × C-to-C + (π × pulley pitch diameter). If you know your tooth count, multiply by the pitch: for HTD 8M, Length (mm) = Teeth × 8. For example, 50 teeth × 8mm = 400mm belt. When in doubt, size up — a slightly longer belt can be tensioned; a short belt cannot be installed.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the load capacity of an HTD 8M timing belt?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"HTD 8M belts are generally rated for moderate-to-heavy power transmission. The 8mm pitch profile is designed for higher torque applications compared to smaller pitches like 3M or 5M. Actual load capacity depends on belt width, pulley diameter, and operating speed — for this 20mm-wide variant, typical tensile load ratings are in the range of several hundred Newtons. Consult your drive system's engineering specs to confirm suitability.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can this belt be used outdoors or in wet environments?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"These HTD 8M timing belts are made from neoprene rubber with fiberglass or steel cord reinforcement, which generally offers good resistance to moisture, mild oils, and temperature variation. They are typically suitable for light outdoor or damp-environment use. However, prolonged exposure to UV, harsh chemicals, or extreme temperatures may reduce belt life. For demanding outdoor applications, verify the specific material spec or contact us.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What pulley standard is compatible with HTD 8M belts?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"HTD 8M belts are designed to run on HTD (High Torque Drive) pulleys with an 8mm pitch. They are not interchangeable with trapezoidal (MXL, XL, L) or GT2\/GT3 profile pulleys of the same pitch. Always match the belt profile to the pulley tooth profile. HTD 8M pulleys are widely available in aluminum and steel for shaft diameters from roughly 6mm to 30mm+.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I decide between HTD 8M and other belt pitches like 5M or 14M?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Choose your pitch based on torque and speed requirements. HTD 5M (5mm pitch) suits lighter-duty or higher-speed applications such as 3D printers and small CNC axes. HTD 8M (8mm pitch) handles higher torque — ideal for conveyor drives, robotics, and mid-size CNC machines. HTD 14M is for heavy industrial drives. If your system currently uses 8M pulleys, this belt is the correct match.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is this a closed-loop belt or open-ended?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"This is a closed-loop (endless) timing belt — it forms a continuous loop with no joint or splice. Closed-loop belts provide consistent tension and are required for most synchronous drive applications. They must be installed by sliding over the pulleys before mounting shafts or by using a split\/removable pulley design.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What materials are used in this HTD 8M timing belt?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"HTD 8M timing belts of this type are typically constructed with a neoprene rubber body, fiberglass or steel tensile cord reinforcement, and nylon tooth facing fabric. This combination provides flexibility, dimensional stability under load, and resistance to wear on the tooth surface. Contact us to confirm the exact cord material for your specific length.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n\n\u003cdiv class=\"hdiy-desc\"\u003e\n\n  \u003ch2\u003eHTD 8M Timing Belt 20mm Wide — Reliable Closed Loop Drive for CNC, Robotics \u0026amp; Conveyor Systems\u003c\/h2\u003e\n\n  \u003cdiv class=\"hdiy-overview\"\u003e\n    \u003cp\u003eWhen a slipping or stretched drive belt causes positioning errors on your CNC router, missed steps on your 3D printer gantry, or uneven feed on your conveyor line, the root cause is almost always a belt that wasn't engineered for the load. Engineers, machine builders, and serious DIYers who need a synchronous drive solution with an 8mm pitch and 20mm working width will find this HTD 8M closed loop timing belt a direct, dependable replacement or upgrade component.\u003c\/p\u003e\n\n    \u003cp\u003eEach belt is a single closed-loop unit — no splices, no joints — constructed with a neoprene rubber body, reinforced tensile cord (typically fiberglass or steel), and a nylon tooth-facing fabric for reduced wear. The belt width is 20mm and the pitch is 8mm (HTD profile), with perimeter lengths available from 288mm (≈11.3\") to 5432mm (≈213.9\"), covering 114 size options so you can match your exact center-to-center distance without custom fabrication.\u003c\/p\u003e\n\n    \u003cp\u003eTypical applications include CNC router X\/Y axis drives, laser cutter gantry systems, conveyor belt synchronization, robotic arm joints, and automated packaging equipment — anywhere a synchronous HTD 8M closed loop rubber drive belt is required to maintain precise positional accuracy under moderate-to-high torque loads.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-compat\"\u003e\n    \u003cspan class=\"hdiy-compat-icon\"\u003e🔗\u003c\/span\u003e\n    \u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for use with HTD 8M profile pulleys only. Not compatible with trapezoidal (XL, L, H), GT2, or GT3 pulleys. Verify your pulley tooth profile before ordering.\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-note\"\u003e\n    \u003cspan class=\"hdiy-note-icon\"\u003e⚠️\u003c\/span\u003e\n    \u003cstrong\u003eSize confirmation:\u003c\/strong\u003e Belt length = number of teeth × 8mm. Double-check your required perimeter before selecting a variant. Closed-loop belts cannot be shortened after purchase.\n  \u003c\/div\u003e\n\n  \u003ch2\u003e✅ Key Features of These HTD 8M Closed Loop Timing Belts\u003c\/h2\u003e\n\n  \u003cul class=\"hdiy-features\"\u003e\n    \u003cli\u003e\n      \u003cspan class=\"hdiy-icon\"\u003e⚙️\u003c\/span\u003e\n      \u003cspan\u003e\u003cstrong\u003eHTD 8mm Pitch Profile\u003c\/strong\u003e — The rounded HTD tooth geometry distributes load across a larger contact area than trapezoidal profiles, reducing tooth shear stress in high-torque synchronous drive applications.\u003c\/span\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cspan class=\"hdiy-icon\"\u003e📏\u003c\/span\u003e\n      \u003cspan\u003e\u003cstrong\u003e20mm Working Width\u003c\/strong\u003e — A 20mm belt width provides substantially more tensile capacity than narrower 10mm or 15mm variants, making it suitable for conveyor drives, gantry systems, and multi-axis CNC machines.\u003c\/span\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cspan class=\"hdiy-icon\"\u003e🔄\u003c\/span\u003e\n      \u003cspan\u003e\u003cstrong\u003eClosed-Loop Construction\u003c\/strong\u003e — Endless, splice-free loop eliminates the weak point of joined belts, ensuring consistent tension and tooth engagement throughout the full rotation cycle.\u003c\/span\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cspan class=\"hdiy-icon\"\u003e🧱\u003c\/span\u003e\n      \u003cspan\u003e\u003cstrong\u003eReinforced Tensile Cord\u003c\/strong\u003e — Internal cord reinforcement (typically fiberglass or steel) resists elongation under dynamic loads, maintaining accurate positioning in closed-loop motion control systems.\u003c\/span\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cspan class=\"hdiy-icon\"\u003e🛡️\u003c\/span\u003e\n      \u003cspan\u003e\u003cstrong\u003eNylon Tooth Facing\u003c\/strong\u003e — The nylon fabric layer on the tooth surface reduces friction against pulley flanges and extends service life in continuous-duty drive systems.\u003c\/span\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cspan class=\"hdiy-icon\"\u003e📐\u003c\/span\u003e\n      \u003cspan\u003e\u003cstrong\u003e114 Length Options in One Listing\u003c\/strong\u003e — From 288mm (36 teeth) to 5432mm (679 teeth), you can find the exact perimeter for your drive without resorting to custom belt orders or open-ended belt splicing.\u003c\/span\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003e📐 Technical Specifications — HTD 8M Timing Belt\u003c\/h2\u003e\n\n  \u003cdiv class=\"hdiy-table-wrap\"\u003e\n    \u003ctable\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003cth\u003eBelt Profile\u003c\/th\u003e\n\u003ctd\u003eHTD (High Torque Drive)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003ePitch\u003c\/th\u003e\n\u003ctd\u003e8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eBelt Width\u003c\/th\u003e\n\u003ctd\u003e20mm (≈0.79\")\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eBelt Type\u003c\/th\u003e\n\u003ctd\u003eClosed loop (endless)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eAvailable Lengths\u003c\/th\u003e\n\u003ctd\u003e288mm (≈11.3\") to 5432mm (≈213.9\") — see variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eTooth Count Range\u003c\/th\u003e\n\u003ctd\u003e36 teeth to 679 teeth — see variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eBody Material\u003c\/th\u003e\n\u003ctd\u003eNeoprene rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eReinforcement\u003c\/th\u003e\n\u003ctd\u003eFiberglass or steel tensile cord (typically)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eTooth Facing\u003c\/th\u003e\n\u003ctd\u003eNylon fabric\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCompatible Pulley Profile\u003c\/th\u003e\n\u003ctd\u003eHTD 8M only\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eQuantity per Order\u003c\/th\u003e\n\u003ctd\u003e1 belt\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eOperating Temperature\u003c\/th\u003e\n\u003ctd\u003eContact us to confirm\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n\n  \u003cdiv class=\"hdiy-faq\"\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I choose the right belt length?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eMeasure the center-to-center distance between your two pulleys, then use the formula: \u003cstrong\u003eBelt Length = 2 × C-to-C + (π × pulley pitch diameter)\u003c\/strong\u003e. If you already know your tooth count, simply multiply by the pitch: for HTD 8M, Length (mm) = Teeth × 8. For example, 50 teeth × 8mm = 400mm belt (≈15.7\"). When in doubt, size up — a slightly longer belt can be tensioned; a short belt cannot be installed.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat is the load capacity of this HTD 8M timing belt?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eHTD 8M belts are generally rated for moderate-to-heavy power transmission. The 8mm pitch profile handles higher torque than smaller pitches like 3M or 5M. For this 20mm-wide variant, typical tensile load ratings are in the range of several hundred Newtons, though actual capacity depends on pulley diameter, wrap angle, and operating speed. Consult your drive system's engineering specs to confirm suitability for your application.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan this belt be used outdoors or in wet environments?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eThe neoprene rubber construction generally offers good resistance to moisture, mild oils, and moderate temperature variation, making these belts typically suitable for light outdoor or damp-environment use. Prolonged exposure to UV radiation, harsh chemicals, or extreme temperatures may reduce belt life. For demanding outdoor applications, contact us to confirm the specific material specification.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat pulley profile is compatible with HTD 8M belts?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eHTD 8M belts are designed exclusively for \u003cstrong\u003eHTD 8M profile pulleys\u003c\/strong\u003e. They are not interchangeable with trapezoidal (MXL, XL, L, H) pulleys or GT2\/GT3 pulleys, even if the pitch number appears similar. Always match belt profile to pulley tooth profile. HTD 8M pulleys are widely available in aluminum and steel for shaft diameters typically ranging from 6mm to 30mm+.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I decide between HTD 8M and other pitches like 5M or 14M?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eChoose your pitch based on torque and speed requirements. \u003cstrong\u003eHTD 5M\u003c\/strong\u003e suits lighter-duty or higher-speed applications such as 3D printer axes and small CNC machines. \u003cstrong\u003eHTD 8M\u003c\/strong\u003e handles higher torque — ideal for conveyor drives, robotics, and mid-size CNC routers. \u003cstrong\u003eHTD 14M\u003c\/strong\u003e is reserved for heavy industrial drives. If your existing pulleys are HTD 8M, this belt is the correct match.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eIs this a closed-loop belt or open-ended?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eThis is a \u003cstrong\u003eclosed-loop (endless) timing belt\u003c\/strong\u003e — it forms a continuous loop with no joint or splice. Closed-loop belts provide consistent tension and are required for most synchronous drive applications. Installation requires sliding the belt over pulleys before mounting shafts, or using a split\/removable pulley design. Open-ended belts are a separate product category.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat materials are used in this timing belt?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eHTD 8M timing belts of this type are typically constructed with a \u003cstrong\u003eneoprene rubber body\u003c\/strong\u003e, \u003cstrong\u003efiberglass or steel tensile cord\u003c\/strong\u003e reinforcement, and a \u003cstrong\u003enylon tooth-facing fabric\u003c\/strong\u003e. This combination provides flexibility, dimensional stability under load, and reduced tooth wear. Contact us to confirm the exact cord material for your specific length variant.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-cta\"\u003e\n    🛒 Select your \u003cstrong\u003elength and tooth count\u003c\/strong\u003e above, then add to cart — ships from our US warehouse.\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"HomeDIYer","offers":[{"title":"HTD-8M - 20mm(#8mm pitch) \/ 288mm (36 Teeth)","offer_id":52367292104978,"sku":"FAS062540x1","price":14.38,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 320mm (40 Teeth)","offer_id":52367292137746,"sku":"FAS062541x1","price":14.85,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 336mm (42 Teeth)","offer_id":52367292170514,"sku":"FAS062542x1","price":14.85,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 352mm (44 Teeth)","offer_id":52367292203282,"sku":"FAS062544x1","price":16.85,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 360mm (45 Teeth)","offer_id":52367292236050,"sku":"FAS062545x1","price":16.85,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 368mm (46 Teeth)","offer_id":52367292268818,"sku":"FAS062546x1","price":16.85,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 400mm (50 Teeth)","offer_id":52367292301586,"sku":"FAS062547x1","price":17.1,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 408mm (51 Teeth)","offer_id":52367292334354,"sku":"FAS062548x1","price":17.1,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 416mm (52 Teeth)","offer_id":52367292367122,"sku":"FAS062549x1","price":17.1,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 424mm (53 Teeth)","offer_id":52367292399890,"sku":"FAS062550x1","price":18.28,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 432mm (54 Teeth)","offer_id":52367292432658,"sku":"FAS062551x1","price":18.28,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 440mm (55 Teeth)","offer_id":52367292465426,"sku":"FAS062552x1","price":18.28,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 448mm (56 Teeth)","offer_id":52367292498194,"sku":"FAS062553x1","price":17.33,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 456mm (57 Teeth)","offer_id":52367292530962,"sku":"FAS062554x1","price":17.33,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 464mm (58 Teeth)","offer_id":52367292563730,"sku":"FAS062555x1","price":17.33,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 472mm (59 Teeth)","offer_id":52367292596498,"sku":"FAS062556x1","price":18.28,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 480mm (60 Teeth)","offer_id":52367292629266,"sku":"FAS062557x1","price":18.28,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 488mm (61 Teeth)","offer_id":52367292662034,"sku":"FAS062558x1","price":18.28,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 496mm (62 Teeth)","offer_id":52367292694802,"sku":"FAS062559x1","price":18.28,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 504mm (63 Teeth)","offer_id":52367292727570,"sku":"FAS062560x1","price":18.28,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 512mm (64 Teeth)","offer_id":52367292760338,"sku":"FAS062561x1","price":18.28,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 520mm (65 Teeth)","offer_id":52367292793106,"sku":"FAS062562x1","price":18.28,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 528mm (66 Teeth)","offer_id":52367292825874,"sku":"FAS062563x1","price":18.28,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 536mm (67 Teeth)","offer_id":52367292858642,"sku":"FAS062564x1","price":18.28,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 544mm (68 Teeth)","offer_id":52367292891410,"sku":"FAS062565x1","price":18.28,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 552mm (69 Teeth)","offer_id":52367292924178,"sku":"FAS062566x1","price":18.28,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 560mm (70 Teeth)","offer_id":52367292956946,"sku":"FAS062567x1","price":19.23,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 568mm (71 Teeth)","offer_id":52367292989714,"sku":"FAS062568x1","price":19.23,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 576mm (72 Teeth)","offer_id":52367293022482,"sku":"FAS062569x1","price":19.23,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 584mm (73 Teeth)","offer_id":52367293055250,"sku":"FAS062570x1","price":19.23,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 592mm (74 Teeth)","offer_id":52367293088018,"sku":"FAS062571x1","price":19.23,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 600mm (75 Teeth)","offer_id":52367293120786,"sku":"FAS062572x1","price":19.23,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 608mm (76 Teeth)","offer_id":52367293153554,"sku":"FAS062573x1","price":19.23,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 616mm (77 Teeth)","offer_id":52367293186322,"sku":"FAS062574x1","price":20.89,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 624mm (78 Teeth)","offer_id":52367293219090,"sku":"FAS062575x1","price":20.89,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 632mm (79 Teeth)","offer_id":52367293251858,"sku":"FAS062576x1","price":20.89,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 640mm (80 Teeth)","offer_id":52367293284626,"sku":"FAS062577x1","price":20.89,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 648mm (81 Teeth)","offer_id":52367293317394,"sku":"FAS062578x1","price":21.24,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 656mm (82 Teeth)","offer_id":52367293350162,"sku":"FAS062579x1","price":21.24,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 664mm (83 Teeth)","offer_id":52367293382930,"sku":"FAS062580x1","price":21.24,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 672mm (84 Teeth)","offer_id":52367293415698,"sku":"FAS062581x1","price":21.24,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 680mm (85 Teeth)","offer_id":52367293448466,"sku":"FAS062582x1","price":21.61,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 688mm (86 Teeth)","offer_id":52367293481234,"sku":"FAS062583x1","price":21.96,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 696mm (87 Teeth)","offer_id":52367293514002,"sku":"FAS062584x1","price":23.27,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 704mm (88 Teeth)","offer_id":52367293546770,"sku":"FAS062585x1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 712mm (89 Teeth)","offer_id":52367293579538,"sku":"FAS062586x1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 720mm (90 Teeth)","offer_id":52367293612306,"sku":"FAS062587x1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 728mm (91 Teeth)","offer_id":52367293645074,"sku":"FAS062588x1","price":24.22,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 736mm (92 Teeth)","offer_id":52367293677842,"sku":"FAS062589x1","price":24.22,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 744mm (93 Teeth)","offer_id":52367293710610,"sku":"FAS062590x1","price":24.22,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 752mm (94 Teeth)","offer_id":52367293743378,"sku":"FAS062591x1","price":25.65,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 760mm (95 Teeth)","offer_id":52367293776146,"sku":"FAS062592x1","price":25.65,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 768mm (96 Teeth)","offer_id":52367293808914,"sku":"FAS062593x1","price":25.65,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 776mm (97 Teeth)","offer_id":52367293841682,"sku":"FAS062594x1","price":26.36,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 784mm (98 Teeth)","offer_id":52367293874450,"sku":"FAS062595x1","price":26.36,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 792mm (99 Teeth)","offer_id":52367293907218,"sku":"FAS062596x1","price":26.36,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 800mm (100 Teeth)","offer_id":52367293939986,"sku":"FAS062597x1","price":27.08,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 808mm (101 Teeth)","offer_id":52367293972754,"sku":"FAS062598x1","price":27.8,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 816mm (100 Teeth)","offer_id":52367294005522,"sku":"FAS062599x1","price":27.8,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 824mm (103 Teeth)","offer_id":52367294038290,"sku":"FAS062600x1","price":29.21,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 832mm (104 Teeth)","offer_id":52367294071058,"sku":"FAS062601x1","price":29.21,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 840mm (105 Teeth)","offer_id":52367294103826,"sku":"FAS062602x1","price":29.21,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 848mm (106 Teeth)","offer_id":52367294136594,"sku":"FAS062603x1","price":29.21,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 856mm (107 Teeth)","offer_id":52367294169362,"sku":"FAS062604x1","price":29.21,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 864mm (108 Teeth)","offer_id":52367294202130,"sku":"FAS062605x1","price":29.93,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 872mm (109 Teeth)","offer_id":52367294234898,"sku":"FAS062606x1","price":29.93,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 880mm (110 Teeth)","offer_id":52367294267666,"sku":"FAS062607x1","price":29.93,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 888mm (111 Teeth)","offer_id":52367294300434,"sku":"FAS062608x1","price":29.93,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 896mm (112 Teeth)","offer_id":52367294333202,"sku":"FAS062609x1","price":29.93,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 904mm (113 Teeth)","offer_id":52367294365970,"sku":"FAS062610x1","price":29.93,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 912mm (114 Teeth)","offer_id":52367294398738,"sku":"FAS062611x1","price":30.12,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 920mm (115 Teeth)","offer_id":52367294431506,"sku":"FAS062612x1","price":32.07,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 928mm (116 Teeth)","offer_id":52367294464274,"sku":"FAS062613x1","price":32.07,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 936mm (117 Teeth)","offer_id":52367294497042,"sku":"FAS062614x1","price":32.07,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 992mm (124 Teeth)","offer_id":52367294529810,"sku":"FAS062615x1","price":34.22,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1000mm (125 Teeth)","offer_id":52367294562578,"sku":"FAS062616x1","price":34.92,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1008mm (126 Teeth)","offer_id":52367294595346,"sku":"FAS062617x1","price":34.92,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1184mm (148 Teeth)","offer_id":52367294628114,"sku":"FAS062618x1","price":42.77,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1192mm (149 Teeth)","offer_id":52367294660882,"sku":"FAS062619x1","price":42.77,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1200mm (150 Teeth)","offer_id":52367294693650,"sku":"FAS062620x1","price":42.77,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1208mm (151 Teeth)","offer_id":52367294726418,"sku":"FAS062621x1","price":42.77,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1216mm (152 Teeth)","offer_id":52367294759186,"sku":"FAS062622x1","price":43.72,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1224mm (153 Teeth)","offer_id":52367294791954,"sku":"FAS062623x1","price":43.72,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1232mm (154 Teeth)","offer_id":52367294824722,"sku":"FAS062624x1","price":43.72,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1360mm (170 Teeth)","offer_id":52367294857490,"sku":"FAS062625x1","price":48.48,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1440mm (180 Teeth)","offer_id":52367294890258,"sku":"FAS062626x1","price":52.05,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1448mm (181 Teeth)","offer_id":52367294923026,"sku":"FAS062627x1","price":52.05,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1456mm (182 Teeth)","offer_id":52367294955794,"sku":"FAS062628x1","price":52.05,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1464mm (183 Teeth)","offer_id":52367294988562,"sku":"FAS062629x1","price":52.05,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1472mm (184 Teeth)","offer_id":52367295021330,"sku":"FAS062630x1","price":52.05,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1480mm (185 Teeth)","offer_id":52367295054098,"sku":"FAS062631x1","price":52.05,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1488mm (186 Teeth)","offer_id":52367295086866,"sku":"FAS062632x1","price":52.05,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1496mm (187 Teeth)","offer_id":52367295119634,"sku":"FAS062633x1","price":52.05,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1504mm (188 Teeth)","offer_id":52367295152402,"sku":"FAS062634x1","price":53.48,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1512mm (189 Teeth)","offer_id":52367295185170,"sku":"FAS062635x1","price":53.48,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1520mm (190 Teeth)","offer_id":52367295217938,"sku":"FAS062636x1","price":53.48,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1528mm (191 Teeth)","offer_id":52367295250706,"sku":"FAS062637x1","price":54.67,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1536mm (192 Teeth)","offer_id":52367295283474,"sku":"FAS062638x1","price":54.67,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1544mm (193 Teeth)","offer_id":52367295316242,"sku":"FAS062639x1","price":55.38,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1552mm (194 Teeth)","offer_id":52367295349010,"sku":"FAS062640x1","price":55.38,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1560mm (195 Teeth)","offer_id":52367295381778,"sku":"FAS062641x1","price":55.62,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1576mm (197 Teeth)","offer_id":52367295414546,"sku":"FAS062642x1","price":57.05,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1584mm (198 Teeth)","offer_id":52367295447314,"sku":"FAS062643x1","price":57.05,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1600mm (200 Teeth)","offer_id":52367295480082,"sku":"FAS062644x1","price":57.05,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1608mm (201 Teeth)","offer_id":52367295512850,"sku":"FAS062645x1","price":57.05,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1616mm (202 Teeth)","offer_id":52367295545618,"sku":"FAS062646x1","price":57.05,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1624mm (203 Teeth)","offer_id":52367295578386,"sku":"FAS062647x1","price":58.71,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1632mm (204 Teeth)","offer_id":52367295611154,"sku":"FAS062648x1","price":58.71,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 1640mm (205 Teeth)","offer_id":52367295643922,"sku":"FAS062649x1","price":58.71,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 2056mm (257 Teeth)","offer_id":52367295676690,"sku":"FAS062650x1","price":70.6,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 2080mm (260 Teeth)","offer_id":52367295709458,"sku":"FAS062651x1","price":71.32,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 2104mm (263 Teeth)","offer_id":52367295742226,"sku":"FAS062652x1","price":71.32,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 4400mm (550 Teeth)","offer_id":52367295774994,"sku":"FAS062653x1","price":180.98,"currency_code":"USD","in_stock":true},{"title":"HTD-8M - 20mm(#8mm pitch) \/ 5432mm (679 Teeth)","offer_id":52367295807762,"sku":"FAS062654x1","price":203.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/Main-01_1649a66b-bb79-4f80-8a02-cff5fc66e4c8.jpg?v=1781246288","url":"https:\/\/homediyer.com\/products\/htd-8m-timing-belt-20mm-wide","provider":"HomeDIYer","version":"1.0","type":"link"}