{"product_id":"m2-2280-ssd-heatsink-dual-layer-alloy-thermal-pads-2-pack","title":"M.2 2280 SSD Heatsink — Dual-Layer Alloy Cooler with Thermal Pads, 2-Pack","description":"\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What SSD form factor does this heatsink fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"This heatsink is designed specifically for M.2 2280 SSDs — the most common M.2 size, measuring 80mm (approximately 3.15\\u2033) in length. It is not compatible with M.2 2242 or M.2 22110 drives. Check your SSD label or motherboard manual to confirm your drive is the 2280 size before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How much does this heatsink reduce SSD temperatures?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Based on testing, this heatsink can reduce SSD operating temperatures by approximately 5\\u00b0C to 30\\u00b0C depending on the environment, airflow inside the case, SSD workload, and ambient temperature. Results will vary. In a well-ventilated mid-tower case under sustained read\/write workloads, temperature reductions of 10\\u00b0C to 20\\u00b0C are generally achievable.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is included in each order?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Each order includes 2 complete heatsink sets. Each set contains: 1 \\u00d7 dual-layer magnesium-aluminum alloy heatsink (top cover + base), 1 \\u00d7 top thermal pad, 1 \\u00d7 bottom thermal pad, and mounting screws. Thermal paste is not required — the included thermal pads handle heat transfer between the SSD and the heatsink.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Will this heatsink fit if my motherboard already has an M.2 shield or cover?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"If your motherboard already has a factory M.2 heatsink or shield installed over the M.2 slot, you will need to remove it before installing this aftermarket heatsink. Most motherboard M.2 shields are held in place by one or two screws and can be removed easily. Check your motherboard manual for instructions.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the adjustable screw position accommodate both single-sided and double-sided SSDs?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The heatsink features an adjustable screw hole position (3mm \/ 0.12\\u2033 adjustment range) that allows it to clamp securely onto both single-sided (thinner) and double-sided (thicker) M.2 2280 SSDs. This ensures consistent thermal pad contact regardless of drive thickness.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is this heatsink compatible with NVMe and SATA M.2 SSDs?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. This heatsink is a passive thermal solution that works with any M.2 2280 drive regardless of interface — NVMe (PCIe Gen 3 or Gen 4) or SATA. NVMe drives, especially Gen 4 models, typically run hotter and benefit more from active heatsink cooling.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I install this heatsink on my M.2 SSD?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Installation takes approximately 2 minutes: (1) Open the heatsink and remove the base. (2) Place the bottom thermal pad on the base. (3) Seat your M.2 2280 SSD on the base. (4) Place the top thermal pad on the SSD. (5) Align the top cover and secure with the included screws. (6) Install the assembled unit into your motherboard\\u2019s M.2 slot as normal.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does this heatsink require any tools or thermal paste to install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"A small Phillips-head screwdriver is needed to tighten the mounting screws. No thermal paste is required — the included thermal pads are pre-cut to size and handle heat transfer between the SSD chips and the alloy heatsink body. Do not apply additional thermal paste on top of the thermal pads.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n\n\u003cdiv class=\"hdiy-desc\"\u003e\n\n  \u003cdiv class=\"hdiy-overview\"\u003e\n    \u003ch2\u003eM.2 2280 SSD Heatsink — Keep Your Drive Cool Under Sustained Workloads\u003c\/h2\u003e\n    \u003cp\u003eNVMe SSDs — especially PCIe Gen 4 drives — generate significant heat during sustained reads and writes. When temperatures climb too high, drives throttle their speeds to protect themselves, turning a fast storage upgrade into a bottleneck. This \u003cstrong\u003eM.2 2280 SSD heatsink\u003c\/strong\u003e is built for PC builders, gamers, and content creators who want to keep their drive running at full speed without thermal throttling. The open-channel alloy design dissipates heat passively without adding bulk or requiring any cables.\u003c\/p\u003e\n    \u003cp\u003eEach order includes \u003cstrong\u003e2 complete heatsink sets\u003c\/strong\u003e. Each set contains: 1 × dual-layer magnesium-aluminum alloy heatsink (top cover + base), 1 × top thermal pad, 1 × bottom thermal pad, and mounting screws — everything needed for a clean installation. The heatsink measures \u003cstrong\u003e73.5 × 23.1 × 10.5mm (2.89\" × 0.91\" × 0.41\")\u003c\/strong\u003e and weighs 23.5g per unit. An adjustable screw hole position (3mm \/ 0.12\" range) accommodates both single-sided and double-sided M.2 2280 drives. Available in Blue, Pink, Orange, and Red.\u003c\/p\u003e\n    \u003cp\u003eThis heatsink is ideal for \u003cstrong\u003ehigh-performance NVMe SSD cooling\u003c\/strong\u003e in gaming PCs and workstations where Gen 4 drives run hot under load, as a \u003cstrong\u003epassive M.2 cooler for compact ITX builds\u003c\/strong\u003e where airflow is limited, and as a straightforward \u003cstrong\u003eSSD temperature management upgrade\u003c\/strong\u003e for any desktop that lacks a factory M.2 shield. Testing shows temperature reductions of 5°C–30°C depending on environment and workload.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-compat\"\u003e\n    \u003cspan class=\"hdiy-compat-icon\"\u003e🔌\u003c\/span\u003e\n    \u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits \u003cstrong\u003eM.2 2280 SSDs only\u003c\/strong\u003e (80mm length). Compatible with NVMe (PCIe Gen 3 \u0026amp; Gen 4) and SATA M.2 drives. Not compatible with M.2 2242 or M.2 22110 form factors. Remove any existing motherboard M.2 shield before installation.\n  \u003c\/div\u003e\n\n  \u003ch2\u003e✅ Key Features of These M.2 2280 SSD Heatsinks\u003c\/h2\u003e\n  \u003cul class=\"hdiy-features\"\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🧲\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eDual-Layer Magnesium-Aluminum Alloy Construction\u003c\/strong\u003e — The two-layer alloy body (top cover + base) increases total contact surface area compared to a single-plate design, drawing heat away from the SSD chips more effectively. Magnesium-aluminum alloy is lighter than pure aluminum while maintaining strong thermal conductivity.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e💨\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eOmnidirectional Airflow Channel Design\u003c\/strong\u003e — The open lattice pattern on the top cover creates multi-directional airflow channels across the fin surface. Heat dissipates in all directions rather than accumulating in a single zone, improving passive cooling efficiency in both open-air and enclosed case environments.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🌡️\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e5°C–30°C Temperature Reduction\u003c\/strong\u003e — Tested temperature reductions range from 5°C to 30°C depending on case airflow, ambient temperature, and SSD workload. For Gen 4 NVMe drives that throttle above 70°C, keeping temperatures in the 50°C–60°C range under load helps maintain consistent read\/write speeds.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔧\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eAdjustable Screw Position for Variable SSD Thickness\u003c\/strong\u003e — The 3mm (0.12\") adjustable screw hole range allows the heatsink to clamp securely onto both single-sided and double-sided M.2 2280 SSDs. This ensures consistent thermal pad compression and contact regardless of drive thickness.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📦\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e2-Pack with Complete Installation Hardware\u003c\/strong\u003e — Each order includes 2 full heatsink sets. Each set comes with pre-cut top and bottom thermal pads and mounting screws. No thermal paste, no additional purchases, and no tools beyond a small Phillips screwdriver are needed. Installation takes approximately 2 minutes per drive.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🎨\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eFour Color Options for Build Aesthetics\u003c\/strong\u003e — Available in Blue, Pink, Orange, and Red anodized finishes. The geometric lattice top cover adds a mechanical-style visual element to your motherboard without requiring RGB lighting or additional power connections.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003e📐 Technical Specifications — M.2 2280 SSD Heatsink\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-table-wrap\"\u003e\n    \u003ctable\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eDazzcold-006 (GM-SR006)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCompatible SSD Form Factor\u003c\/th\u003e\n\u003ctd\u003eM.2 2280 (80mm length)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCompatible SSD Interface\u003c\/th\u003e\n\u003ctd\u003eNVMe PCIe Gen 3 \/ Gen 4, SATA M.2\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eHeatsink Dimensions\u003c\/th\u003e\n\u003ctd\u003e73.5 × 23.1 × 10.5mm (2.89\" × 0.91\" × 0.41\")\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eWeight (per unit)\u003c\/th\u003e\n\u003ctd\u003e23.5g (≈0.83 oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMagnesium-Aluminum Alloy (top cover + base)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCooling Method\u003c\/th\u003e\n\u003ctd\u003ePassive Heatsink (no fan)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eThermal Interface Material\u003c\/th\u003e\n\u003ctd\u003ePre-cut thermal pads (top + bottom, included)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eScrew Hole Adjustment Range\u003c\/th\u003e\n\u003ctd\u003e3mm (0.12\") — accommodates single-sided and double-sided SSDs\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eTemperature Reduction\u003c\/th\u003e\n\u003ctd\u003e5°C–30°C (varies by environment and workload)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eAvailable Colors\u003c\/th\u003e\n\u003ctd\u003eBlue \/ Pink \/ Orange \/ Red\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eQuantity per Order\u003c\/th\u003e\n\u003ctd\u003e2 heatsink sets (2 × top cover + 2 × base + thermal pads + screws)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003ePackage\u003c\/th\u003e\n\u003ctd\u003eRetail box\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-note\"\u003e\n    \u003cspan class=\"hdiy-note-icon\"\u003e⚠️\u003c\/span\u003e\n    \u003cstrong\u003eBefore ordering:\u003c\/strong\u003e Confirm your SSD is the M.2 2280 (80mm) form factor. If your motherboard has a factory M.2 heatsink installed, remove it before fitting this cooler. Do not apply additional thermal paste on top of the included thermal pads.\n  \u003c\/div\u003e\n\n  \u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-faq\"\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat SSD form factor does this heatsink fit?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eThis heatsink is designed specifically for \u003cstrong\u003eM.2 2280 SSDs\u003c\/strong\u003e — the most common M.2 size, measuring 80mm (approximately 3.15\") in length. It is not compatible with M.2 2242 or M.2 22110 drives. Check your SSD label or motherboard manual to confirm your drive is the 2280 size before ordering.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow much does this heatsink reduce SSD temperatures?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eBased on testing, this heatsink can reduce SSD operating temperatures by approximately \u003cstrong\u003e5°C to 30°C\u003c\/strong\u003e depending on case airflow, SSD workload, and ambient temperature. In a well-ventilated mid-tower case under sustained read\/write workloads, temperature reductions of 10°C to 20°C are generally achievable. Results will vary by system configuration.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat is included in each order?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eEach order includes \u003cstrong\u003e2 complete heatsink sets\u003c\/strong\u003e. Each set contains: 1 × dual-layer alloy heatsink (top cover + base), 1 × top thermal pad, 1 × bottom thermal pad, and mounting screws. No thermal paste is required — the included thermal pads handle heat transfer between the SSD and the heatsink body.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWill this heatsink fit if my motherboard already has an M.2 shield or cover?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eIf your motherboard has a factory M.2 heatsink or shield installed, you will need to remove it before fitting this aftermarket cooler. Most motherboard M.2 shields are held by one or two screws and can be removed in under a minute. Refer to your motherboard manual for the correct removal procedure.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eDoes the adjustable screw position accommodate both single-sided and double-sided SSDs?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eYes. The adjustable screw hole position (3mm \/ 0.12\" range) allows the heatsink to clamp securely onto both \u003cstrong\u003esingle-sided (thinner)\u003c\/strong\u003e and \u003cstrong\u003edouble-sided (thicker)\u003c\/strong\u003e M.2 2280 SSDs. This ensures consistent thermal pad compression and contact regardless of drive thickness.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eIs this heatsink compatible with NVMe and SATA M.2 SSDs?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eYes. This is a passive thermal solution that works with any \u003cstrong\u003eM.2 2280 drive\u003c\/strong\u003e regardless of interface — NVMe (PCIe Gen 3 or Gen 4) or SATA. NVMe Gen 4 drives typically run the hottest and benefit most from aftermarket heatsink cooling.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I install this heatsink on my M.2 SSD?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eInstallation takes approximately 2 minutes: \u003cstrong\u003e(1)\u003c\/strong\u003e Open the heatsink and remove the base. \u003cstrong\u003e(2)\u003c\/strong\u003e Place the bottom thermal pad on the base. \u003cstrong\u003e(3)\u003c\/strong\u003e Seat your M.2 2280 SSD on the base. \u003cstrong\u003e(4)\u003c\/strong\u003e Place the top thermal pad on the SSD. \u003cstrong\u003e(5)\u003c\/strong\u003e Align the top cover and tighten the included screws. \u003cstrong\u003e(6)\u003c\/strong\u003e Install the assembled unit into your motherboard’s M.2 slot as normal.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eDoes this heatsink require thermal paste or any special tools?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eA small \u003cstrong\u003ePhillips-head screwdriver\u003c\/strong\u003e is the only tool needed. No thermal paste is required — the included pre-cut thermal pads handle heat transfer between the SSD chips and the alloy body. Do not apply additional thermal paste on top of the thermal pads, as this can reduce contact quality.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-cta\"\u003e\n    🛒 Select your color above, then add to cart.\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"HomeDIYer","offers":[{"title":"Blue*2","offer_id":52381152903442,"sku":"HKTBSMA740001","price":38.0,"currency_code":"USD","in_stock":true},{"title":"Pink*2","offer_id":52381152936210,"sku":"HKTBSMA740002","price":38.0,"currency_code":"USD","in_stock":true},{"title":"Orange*2","offer_id":52381152968978,"sku":"HKTBSMA740003","price":38.0,"currency_code":"USD","in_stock":true},{"title":"Red*2","offer_id":52381153001746,"sku":"HKTBSMA740004","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/08_7da4b20a-6759-46bc-a66d-674c798fbac6.jpg?v=1781595797","url":"https:\/\/homediyer.com\/products\/m2-2280-ssd-heatsink-dual-layer-alloy-thermal-pads-2-pack","provider":"HomeDIYer","version":"1.0","type":"link"}