{"product_id":"m5-t-bolt-square-head-screws-stainless-steel-304-t-slot-aluminum-extrusion","title":"M5 T-Bolt Square Head Screws — Stainless Steel 304 (A2) for T-Slot Aluminum Extrusion Profiles","description":"\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I choose the right bolt length for my T-slot extrusion project?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"A general rule is to select a bolt length equal to the thickness of the material you are clamping plus the depth of the T-slot channel. For most 20-series and 30-series aluminum extrusion profiles, lengths of 8mm–16mm (5\/16\\\"–5\/8\\\") are typically used for thin brackets, while 20mm–40mm (3\/4\\\"–1-9\/16\\\") suit thicker plates or stacked assemblies. When in doubt, measure your stack-up and add 2–3mm of thread engagement margin.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the tensile strength of these M5 stainless steel T-bolts?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"These bolts are made from 304 stainless steel (A2 grade), which generally provides a tensile strength of approximately 500–700 MPa depending on the specific lot and heat treatment. For structural or load-bearing assemblies, always verify the required clamping force against your application's safety factor. Contact us to confirm if you need certified mechanical property data.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Are these T-bolts suitable for outdoor or corrosive environments?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. 304 stainless steel (A2) offers good resistance to atmospheric corrosion, moisture, and mild chemicals, making it suitable for indoor and light outdoor use. For marine or highly chloride-rich environments, 316 stainless steel (A4) is generally recommended. These bolts are not coated, so their corrosion resistance comes from the alloy itself.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Which T-slot profile series are these M5 bolts compatible with?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"M5 T-bolts are most commonly used with 20-series (20×20, 20×40) and 30-series (30×30, 30×60) aluminum extrusion profiles that feature a 6mm slot width. They are also compatible with many 40-series profiles depending on the slot geometry. Always verify your profile's slot width and T-nut specification before ordering.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Do these bolts require a T-nut or hammer nut to install?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. T-bolts are designed to slide into the T-slot channel of an aluminum extrusion profile and are typically paired with a T-nut, hammer nut, or roll-in nut on the receiving end — or used in reverse with the square head captured in the slot. The square head prevents rotation inside the channel, allowing single-handed tightening with a standard hex wrench or socket.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How many bolts do I need for a typical CNC router or 3D printer frame build?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"This varies by frame size and design, but a typical 3D printer or small CNC router frame generally uses 20–60 M5 T-bolts. Larger gantry-style CNC machines or workstation frames may require 100 or more. We offer quantities from 1 to 200 pieces per order, so you can match your exact project needs without overstocking.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What thread pitch do these M5 T-bolts use?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"M5 bolts use a standard metric coarse thread pitch of 0.8mm per ISO 68-1, which is the universal standard for M5 fasteners. This is compatible with all standard M5 T-nuts, hex nuts, and threaded inserts designed for metric coarse thread.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n\n\u003cdiv class=\"hdiy-desc\"\u003e\n\n  \u003cdiv class=\"hdiy-overview\"\u003e\n    \u003ch2\u003eM5 T-Bolt Square Head Screws for T-Slot Aluminum Extrusion — Stainless Steel 304 A2\u003c\/h2\u003e\n    \u003cp\u003eIf you've ever tried to tighten a fastener inside a narrow aluminum extrusion channel only to have the bolt spin freely, you know exactly why T-bolts exist. Makers, fabricators, and machine builders working with T-slot aluminum extrusion profiles need a fastener whose head locks into the channel and stays put — letting you drive it home with one hand. These M5 square head T-bolts are built for that exact job.\u003c\/p\u003e\n    \u003cp\u003eEach bolt is machined from 304 stainless steel (A2 grade) — a corrosion-resistant alloy that holds up in workshop humidity, light outdoor exposure, and contact with cutting fluids. The square head profile is sized to slide into standard T-slot channels and resist rotation under torque. Available lengths run from 8mm (5\/16\") to 40mm (1-9\/16\"), and you can order in quantities from 1 piece up to 200 pieces to match your project scale exactly.\u003c\/p\u003e\n    \u003cp\u003eThese M5 T-slot profile screws are a go-to choice for 3D printer frame assembly, CNC router gantry builds, aluminum extrusion workbench construction, and modular fixture tables. Whether you're sourcing a handful for a repair or stocking up for a production run of machine frames, the quantity tiers let you buy what you actually need.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-compat\"\u003e\n    \u003cspan class=\"hdiy-compat-icon\"\u003e🔩\u003c\/span\u003e\n    \u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for standard 6mm T-slot aluminum extrusion profiles — commonly 20-series (20×20, 20×40) and 30-series (30×30, 30×60). Verify your profile's slot width before ordering. Thread: M5 × 0.8mm metric coarse (ISO standard).\n  \u003c\/div\u003e\n\n  \u003ch2\u003e✅ Key Features of These M5 T-Slot Square Head Bolts\u003c\/h2\u003e\n  \u003cul class=\"hdiy-features\"\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔲\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eAnti-Rotation Square Head\u003c\/strong\u003e — The square head geometry locks into the T-slot channel and prevents spinning during tightening, enabling single-handed installation in aluminum extrusion T-slot track assemblies.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🛡️\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e304 Stainless Steel (A2 Grade)\u003c\/strong\u003e — Resists rust, oxidation, and mild chemical exposure without surface coatings. Suitable for indoor workshops, light outdoor structures, and environments with occasional moisture contact.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📏\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e9 Length Options: 8mm–40mm\u003c\/strong\u003e — From 8mm (5\/16\") for thin bracket connections to 40mm (1-9\/16\") for thick plate stack-ups, so you can match the bolt length to your actual material thickness without cutting or shimming.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📦\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eFlexible Quantity Tiers\u003c\/strong\u003e — Order 1, 5, 10, 20, 30, 40, 50, 100, or 200 pieces. Useful for one-off repairs, prototype builds, or bulk stocking for CNC router frame kits and modular workstation projects.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e⚙️\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eStandard M5 × 0.8mm Metric Coarse Thread\u003c\/strong\u003e — Fully compatible with off-the-shelf M5 T-nuts, hammer nuts, roll-in nuts, and hex nuts. No proprietary tooling or adapters required for assembly.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🏗️\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eVersatile Across Extrusion Profiles\u003c\/strong\u003e — Works with 20-series and 30-series T-slot aluminum extrusion profiles used in 3D printer frames, CNC gantry systems, linear motion rails, and modular fixture tables.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003e📐 Technical Specifications — M5 Square Head T-Bolt\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-table-wrap\"\u003e\n    \u003ctable\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003cth\u003eThread Size\u003c\/th\u003e\n\u003ctd\u003eM5\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eThread Pitch\u003c\/th\u003e\n\u003ctd\u003e0.8mm (metric coarse, ISO 68-1)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eHead Type\u003c\/th\u003e\n\u003ctd\u003eSquare head (T-bolt \/ T-slot profile screw)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eAvailable Lengths\u003c\/th\u003e\n\u003ctd\u003e8mm (5\/16\"), 10mm (3\/8\"), 12mm (15\/32\"), 16mm (5\/8\"), 20mm (25\/32\"), 25mm (1\"), 30mm (1-3\/16\"), 35mm (1-3\/8\"), 40mm (1-9\/16\")\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304 (A2)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eNatural (uncoated stainless)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCompatible Slot Width\u003c\/th\u003e\n\u003ctd\u003eTypically 6mm T-slot (verify with your extrusion profile spec)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCompatible Profile Series\u003c\/th\u003e\n\u003ctd\u003eTypically 20-series and 30-series aluminum extrusion; see variant options for confirmation\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eDrive Type\u003c\/th\u003e\n\u003ctd\u003eSee variant options (contact us to confirm hex socket or external hex)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eQuantity Options\u003c\/th\u003e\n\u003ctd\u003e1 \/ 5 \/ 10 \/ 20 \/ 30 \/ 40 \/ 50 \/ 100 \/ 200 pcs per order\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eA2 stainless per ISO 3506\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eContact us to confirm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-note\"\u003e\n    \u003cspan class=\"hdiy-note-icon\"\u003e⚠️\u003c\/span\u003e\n    \u003cstrong\u003eHeads up:\u003c\/strong\u003e T-slot channel dimensions vary by extrusion manufacturer and series. Always measure your profile's slot opening width before ordering. If you're unsure, send us your profile spec and we'll confirm compatibility.\n  \u003c\/div\u003e\n\n  \u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-faq\"\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I choose the right bolt length for my T-slot extrusion project?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eA practical rule: select a bolt length equal to the thickness of the material you're clamping plus enough thread engagement for your nut (typically 5–8mm minimum). For example, if you're attaching a 10mm aluminum plate to an extrusion, a 16mm (5\/8\") or 20mm (25\/32\") bolt generally works well. For thin angle brackets, 8mm (5\/16\") or 10mm (3\/8\") is usually sufficient. When in doubt, go one size longer — you can always add a washer, but you can't add thread length after the fact.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat tensile strength can I expect from these M5 stainless steel T-bolts?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003e304 stainless steel (A2 grade) per ISO 3506 typically provides a tensile strength of around 500 MPa and a proof load stress of approximately 280 MPa for M5 bolts. This is generally adequate for structural connections in aluminum extrusion frames, CNC machine gantries, and fixture tables under normal operating loads. For safety-critical or high-vibration applications, contact us to confirm mechanical property certifications.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan I use these T-bolts outdoors or in humid environments?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eYes, in most cases. 304 stainless steel resists atmospheric corrosion, moisture, and mild chemical exposure well, making it suitable for covered outdoor structures, greenhouses, and workshop environments. It is not ideal for direct saltwater or marine exposure — for those conditions, 316 stainless (A4) is generally recommended. Since these bolts are uncoated, their corrosion resistance comes entirely from the alloy composition.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhich aluminum extrusion profile series are compatible with M5 T-bolts?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eM5 T-bolts are most commonly used with 20-series profiles (20×20mm, 20×40mm, 20×60mm) and 30-series profiles (30×30mm, 30×60mm) that feature a 6mm-wide T-slot. Many 40-series profiles also accept M5 hardware depending on the manufacturer's slot geometry. Always check your extrusion profile's datasheet for the slot width and T-nut specification — some European and Asian extrusion standards differ slightly in slot depth and head clearance.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eDo I need a T-nut or hammer nut to use these bolts?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eIt depends on your assembly method. In the most common configuration, the square head of the T-bolt slides into the T-slot channel (head captured in the slot), and an M5 T-nut or standard hex nut is threaded onto the exposed end to clamp your bracket or plate. The square head prevents the bolt from rotating, so you only need one wrench. Some builders also use these in reverse — threading into a pre-installed T-nut from outside the profile. Either way, no special tools are required beyond a standard hex wrench or socket set.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow many T-bolts do I typically need for a 3D printer or CNC router frame?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eFor a typical desktop 3D printer frame (e.g., CoreXY or Cartesian style), you'll generally need 20–50 M5 T-bolts depending on the design. A small CNC router with a gantry system typically uses 40–80 bolts. Larger workbench or modular fixture table builds can require 100 or more. We offer quantity tiers from 1 to 200 pieces so you can order exactly what your BOM calls for — or add a 10–15% buffer for spares.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat thread pitch do these M5 T-bolts use, and are they compatible with standard M5 nuts?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eThese use the standard M5 × 0.8mm metric coarse thread pitch per ISO 68-1 — the universal standard for M5 fasteners worldwide. They are fully compatible with any standard M5 T-nut, roll-in nut, hammer nut, hex nut, or flange nut. No adapters or special hardware are needed. If you're sourcing T-nuts separately, look for M5 T-nuts rated for your extrusion series (e.g., \"M5 T-nut for 2020 extrusion\").\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-cta\"\u003e\n    🛒 Select your \u003cstrong\u003elength and quantity\u003c\/strong\u003e above, then add to cart — ships from our US warehouse.\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"HomeDIYer","offers":[{"title":"M5*8mm \/ 1 pcs","offer_id":52310128165138,"sku":"PENGBRTQJD020620x1","price":5.43,"currency_code":"USD","in_stock":true},{"title":"M5*10mm \/ 1 pcs","offer_id":52310128197906,"sku":"PENGBRTQJD020621x1","price":5.43,"currency_code":"USD","in_stock":true},{"title":"M5*12mm \/ 1 pcs","offer_id":52310128230674,"sku":"PENGBRTQJD020622x1","price":5.43,"currency_code":"USD","in_stock":true},{"title":"M5*16mm \/ 1 pcs","offer_id":52310128263442,"sku":"PENGBRTQJD020623x1","price":5.43,"currency_code":"USD","in_stock":true},{"title":"M5*20mm \/ 1 pcs","offer_id":52310128296210,"sku":"PENGBRTQJD020624x1","price":5.56,"currency_code":"USD","in_stock":true},{"title":"M5*25mm \/ 1 pcs","offer_id":52310128328978,"sku":"PENGBRTQJD020625x1","price":5.56,"currency_code":"USD","in_stock":true},{"title":"M5*30mm \/ 1 pcs","offer_id":52310128361746,"sku":"PENGBRTQJD020626x1","price":5.56,"currency_code":"USD","in_stock":true},{"title":"M5*35mm \/ 1 pcs","offer_id":52310128394514,"sku":"PENGBRTQJD020627x1","price":5.78,"currency_code":"USD","in_stock":true},{"title":"M5*40mm \/ 1 pcs","offer_id":52310128427282,"sku":"PENGBRTQJD020628x1","price":5.92,"currency_code":"USD","in_stock":true},{"title":"M5*8mm \/ 5 pcs","offer_id":52310128460050,"sku":"PENGBRTQJD020620x5","price":6.87,"currency_code":"USD","in_stock":true},{"title":"M5*10mm \/ 5 pcs","offer_id":52310128492818,"sku":"PENGBRTQJD020621x5","price":6.87,"currency_code":"USD","in_stock":true},{"title":"M5*12mm \/ 5 pcs","offer_id":52310128525586,"sku":"PENGBRTQJD020622x5","price":7.06,"currency_code":"USD","in_stock":true},{"title":"M5*16mm \/ 5 pcs","offer_id":52310128558354,"sku":"PENGBRTQJD020623x5","price":7.14,"currency_code":"USD","in_stock":true},{"title":"M5*20mm \/ 5 pcs","offer_id":52310128591122,"sku":"PENGBRTQJD020624x5","price":7.47,"currency_code":"USD","in_stock":true},{"title":"M5*25mm \/ 5 pcs","offer_id":52310128623890,"sku":"PENGBRTQJD020625x5","price":7.74,"currency_code":"USD","in_stock":true},{"title":"M5*30mm \/ 5 pcs","offer_id":52310128656658,"sku":"PENGBRTQJD020626x5","price":8.09,"currency_code":"USD","in_stock":true},{"title":"M5*35mm \/ 5 pcs","offer_id":52310128689426,"sku":"PENGBRTQJD020627x5","price":8.91,"currency_code":"USD","in_stock":true},{"title":"M5*40mm \/ 5 pcs","offer_id":52310128722194,"sku":"PENGBRTQJD020628x5","price":9.64,"currency_code":"USD","in_stock":true},{"title":"M5*8mm \/ 10 pcs","offer_id":52310128754962,"sku":"PENGBRTQJD020620x10","price":8.42,"currency_code":"USD","in_stock":true},{"title":"M5*10mm \/ 10 pcs","offer_id":52310128787730,"sku":"PENGBRTQJD020621x10","price":8.69,"currency_code":"USD","in_stock":true},{"title":"M5*12mm \/ 10 pcs","offer_id":52310128820498,"sku":"PENGBRTQJD020622x10","price":9.23,"currency_code":"USD","in_stock":true},{"title":"M5*16mm \/ 10 pcs","offer_id":52310128853266,"sku":"PENGBRTQJD020623x10","price":10.27,"currency_code":"USD","in_stock":true},{"title":"M5*20mm \/ 10 pcs","offer_id":52310128886034,"sku":"PENGBRTQJD020624x10","price":11.22,"currency_code":"USD","in_stock":true},{"title":"M5*25mm \/ 10 pcs","offer_id":52310128918802,"sku":"PENGBRTQJD020625x10","price":11.14,"currency_code":"USD","in_stock":true},{"title":"M5*30mm \/ 10 pcs","offer_id":52310128951570,"sku":"PENGBRTQJD020626x10","price":12.23,"currency_code":"USD","in_stock":true},{"title":"M5*35mm \/ 10 pcs","offer_id":52310128984338,"sku":"PENGBRTQJD020627x10","price":13.59,"currency_code":"USD","in_stock":true},{"title":"M5*40mm \/ 10 pcs","offer_id":52310129017106,"sku":"PENGBRTQJD020628x10","price":14.95,"currency_code":"USD","in_stock":true},{"title":"M5*8mm \/ 20 pcs","offer_id":52310129049874,"sku":"PENGBRTQJD020620x20","price":12.23,"currency_code":"USD","in_stock":true},{"title":"M5*10mm \/ 20 pcs","offer_id":52310129082642,"sku":"PENGBRTQJD020621x20","price":13.18,"currency_code":"USD","in_stock":true},{"title":"M5*12mm \/ 20 pcs","offer_id":52310129115410,"sku":"PENGBRTQJD020622x20","price":14.13,"currency_code":"USD","in_stock":true},{"title":"M5*16mm \/ 20 pcs","offer_id":52310129148178,"sku":"PENGBRTQJD020623x20","price":16.03,"currency_code":"USD","in_stock":true},{"title":"M5*20mm \/ 20 pcs","offer_id":52310129180946,"sku":"PENGBRTQJD020624x20","price":17.67,"currency_code":"USD","in_stock":true},{"title":"M5*25mm \/ 20 pcs","offer_id":52310129213714,"sku":"PENGBRTQJD020625x20","price":20.39,"currency_code":"USD","in_stock":true},{"title":"M5*30mm \/ 20 pcs","offer_id":52310129246482,"sku":"PENGBRTQJD020626x20","price":22.7,"currency_code":"USD","in_stock":true},{"title":"M5*35mm \/ 20 pcs","offer_id":52310129279250,"sku":"PENGBRTQJD020627x20","price":25.28,"currency_code":"USD","in_stock":true},{"title":"M5*40mm \/ 20 pcs","offer_id":52310129312018,"sku":"PENGBRTQJD020628x20","price":28.0,"currency_code":"USD","in_stock":true},{"title":"M5*8mm \/ 30 pcs","offer_id":52310129344786,"sku":"PENGBRTQJD020620x30","price":17.39,"currency_code":"USD","in_stock":true},{"title":"M5*10mm \/ 30 pcs","offer_id":52310129377554,"sku":"PENGBRTQJD020621x30","price":18.75,"currency_code":"USD","in_stock":true},{"title":"M5*12mm \/ 30 pcs","offer_id":52310129410322,"sku":"PENGBRTQJD020622x30","price":20.25,"currency_code":"USD","in_stock":true},{"title":"M5*16mm \/ 30 pcs","offer_id":52310129443090,"sku":"PENGBRTQJD020623x30","price":22.97,"currency_code":"USD","in_stock":true},{"title":"M5*20mm \/ 30 pcs","offer_id":52310129475858,"sku":"PENGBRTQJD020624x30","price":25.55,"currency_code":"USD","in_stock":true},{"title":"M5*25mm \/ 30 pcs","offer_id":52310129508626,"sku":"PENGBRTQJD020625x30","price":29.63,"currency_code":"USD","in_stock":true},{"title":"M5*30mm \/ 30 pcs","offer_id":52310129541394,"sku":"PENGBRTQJD020626x30","price":33.03,"currency_code":"USD","in_stock":true},{"title":"M5*35mm \/ 30 pcs","offer_id":52310129574162,"sku":"PENGBRTQJD020627x30","price":36.98,"currency_code":"USD","in_stock":true},{"title":"M5*40mm \/ 30 pcs","offer_id":52310129606930,"sku":"PENGBRTQJD020628x30","price":41.06,"currency_code":"USD","in_stock":true},{"title":"M5*8mm \/ 40 pcs","offer_id":52310129639698,"sku":"PENGBRTQJD020620x40","price":22.56,"currency_code":"USD","in_stock":true},{"title":"M5*10mm \/ 40 pcs","offer_id":52310129672466,"sku":"PENGBRTQJD020621x40","price":24.47,"currency_code":"USD","in_stock":true},{"title":"M5*12mm \/ 40 pcs","offer_id":52310129705234,"sku":"PENGBRTQJD020622x40","price":26.37,"currency_code":"USD","in_stock":true},{"title":"M5*16mm \/ 40 pcs","offer_id":52310129738002,"sku":"PENGBRTQJD020623x40","price":30.04,"currency_code":"USD","in_stock":true},{"title":"M5*20mm \/ 40 pcs","offer_id":52310129770770,"sku":"PENGBRTQJD020624x40","price":33.44,"currency_code":"USD","in_stock":true},{"title":"M5*25mm \/ 40 pcs","offer_id":52310129803538,"sku":"PENGBRTQJD020625x40","price":38.88,"currency_code":"USD","in_stock":true},{"title":"M5*30mm \/ 40 pcs","offer_id":52310129836306,"sku":"PENGBRTQJD020626x40","price":43.37,"currency_code":"USD","in_stock":true},{"title":"M5*35mm \/ 40 pcs","offer_id":52310129869074,"sku":"PENGBRTQJD020627x40","price":48.67,"currency_code":"USD","in_stock":true},{"title":"M5*40mm \/ 40 pcs","offer_id":52310129901842,"sku":"PENGBRTQJD020628x40","price":54.11,"currency_code":"USD","in_stock":true},{"title":"M5*8mm \/ 50 pcs","offer_id":52310129934610,"sku":"PENGBRTQJD020620x50","price":27.73,"currency_code":"USD","in_stock":true},{"title":"M5*10mm \/ 50 pcs","offer_id":52310129967378,"sku":"PENGBRTQJD020621x50","price":30.18,"currency_code":"USD","in_stock":true},{"title":"M5*12mm \/ 50 pcs","offer_id":52310130000146,"sku":"PENGBRTQJD020622x50","price":32.35,"currency_code":"USD","in_stock":true},{"title":"M5*16mm \/ 50 pcs","offer_id":52310130032914,"sku":"PENGBRTQJD020623x50","price":37.11,"currency_code":"USD","in_stock":true},{"title":"M5*20mm \/ 50 pcs","offer_id":52310130065682,"sku":"PENGBRTQJD020624x50","price":41.33,"currency_code":"USD","in_stock":true},{"title":"M5*25mm \/ 50 pcs","offer_id":52310130098450,"sku":"PENGBRTQJD020625x50","price":48.13,"currency_code":"USD","in_stock":true},{"title":"M5*30mm \/ 50 pcs","offer_id":52310130131218,"sku":"PENGBRTQJD020626x50","price":53.71,"currency_code":"USD","in_stock":true},{"title":"M5*35mm \/ 50 pcs","offer_id":52310130163986,"sku":"PENGBRTQJD020627x50","price":60.51,"currency_code":"USD","in_stock":true},{"title":"M5*40mm \/ 50 pcs","offer_id":52310130196754,"sku":"PENGBRTQJD020628x50","price":67.17,"currency_code":"USD","in_stock":true},{"title":"M5*8mm \/ 100 pcs","offer_id":52310130229522,"sku":"PENGBRTQJD020620x100","price":53.57,"currency_code":"USD","in_stock":true},{"title":"M5*10mm \/ 100 pcs","offer_id":52310130262290,"sku":"PENGBRTQJD020621x100","price":58.33,"currency_code":"USD","in_stock":true},{"title":"M5*12mm \/ 100 pcs","offer_id":52310130295058,"sku":"PENGBRTQJD020622x100","price":62.95,"currency_code":"USD","in_stock":true},{"title":"M5*16mm \/ 100 pcs","offer_id":52310130327826,"sku":"PENGBRTQJD020623x100","price":72.34,"currency_code":"USD","in_stock":true},{"title":"M5*20mm \/ 100 pcs","offer_id":52310130360594,"sku":"PENGBRTQJD020624x100","price":80.91,"currency_code":"USD","in_stock":true},{"title":"M5*25mm \/ 100 pcs","offer_id":52310130393362,"sku":"PENGBRTQJD020625x100","price":94.37,"currency_code":"USD","in_stock":true},{"title":"M5*30mm \/ 100 pcs","offer_id":52310130426130,"sku":"PENGBRTQJD020626x100","price":105.52,"currency_code":"USD","in_stock":true},{"title":"M5*35mm \/ 100 pcs","offer_id":52310130458898,"sku":"PENGBRTQJD020627x100","price":118.99,"currency_code":"USD","in_stock":true},{"title":"M5*40mm \/ 100 pcs","offer_id":52310130491666,"sku":"PENGBRTQJD020628x100","price":132.31,"currency_code":"USD","in_stock":true},{"title":"M5*8mm \/ 200 pcs","offer_id":52310130524434,"sku":"PENGBRTQJD020620x200","price":105.25,"currency_code":"USD","in_stock":true},{"title":"M5*10mm \/ 200 pcs","offer_id":52310130557202,"sku":"PENGBRTQJD020621x200","price":114.63,"currency_code":"USD","in_stock":true},{"title":"M5*12mm \/ 200 pcs","offer_id":52310130589970,"sku":"PENGBRTQJD020622x200","price":124.02,"currency_code":"USD","in_stock":true},{"title":"M5*16mm \/ 200 pcs","offer_id":52310130622738,"sku":"PENGBRTQJD020623x200","price":142.51,"currency_code":"USD","in_stock":true},{"title":"M5*20mm \/ 200 pcs","offer_id":52310130655506,"sku":"PENGBRTQJD020624x200","price":159.92,"currency_code":"USD","in_stock":true},{"title":"M5*25mm \/ 200 pcs","offer_id":52310130688274,"sku":"PENGBRTQJD020625x200","price":186.71,"currency_code":"USD","in_stock":true},{"title":"M5*30mm \/ 200 pcs","offer_id":52310130721042,"sku":"PENGBRTQJD020626x200","price":209.15,"currency_code":"USD","in_stock":true},{"title":"M5*35mm \/ 200 pcs","offer_id":52310130753810,"sku":"PENGBRTQJD020627x200","price":236.08,"currency_code":"USD","in_stock":true},{"title":"M5*40mm \/ 200 pcs","offer_id":52310130786578,"sku":"PENGBRTQJD020628x200","price":262.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/Main-03_e678bdbb-1625-49db-a820-0c2f7bd5f4bf.jpg?v=1780406836","url":"https:\/\/homediyer.com\/products\/m5-t-bolt-square-head-screws-stainless-steel-304-t-slot-aluminum-extrusion","provider":"HomeDIYer","version":"1.0","type":"link"}