{"product_id":"outboard-throttle-shift-control-cable-yamaha-suzuki-honda-4m-6-5m","title":"Outboard Throttle \u0026 Shift Control Cable – Yamaha Suzuki Honda Tohatsu, 4m–6.5m, Japanese Import","description":"\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I measure the correct cable length for my boat?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Route a length of rope or flexible tape along the exact path the cable will follow from the helm control box to the outboard motor, following all bends and routing points without pulling tight around corners. Measure the total routed length. Add approximately 300\\u2013500mm (12\\u201320\\\") of slack to allow for installation and adjustment. Select the next available cable length above that total. For example, if your routed measurement is 4.2m, select the 4.5m variant.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Will this cable fit my specific Yamaha outboard model?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"This cable is designed to be compatible with Yamaha outboard motors that use the standard Japanese-specification throttle and shift cable end fitting (approximately 10.5mm diameter tip). It is also compatible with Suzuki, Honda Marine, and Tohatsu outboards that use the same cable interface standard. To confirm compatibility with your specific motor model and year, check your motor\\u2019s service manual for the cable part number and end fitting specification, or contact us with your motor\\u2019s make, model, and year.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is this cable suitable for saltwater use?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The cable outer jacket is made from UV-resistant and moisture-resistant materials designed for marine use in both freshwater and saltwater environments. The inner wire core is generally stainless steel or galvanized steel with a low-friction liner. Rinse the cable and end fittings with fresh water after saltwater use and apply a light coat of marine-grade cable lubricant periodically to maintain smooth operation and extend service life.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I know when my throttle or shift cable needs replacing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Replace the cable if you notice any of the following: stiff or jerky throttle or shift lever movement that does not improve with lubrication; visible kinking, fraying, or corrosion on the cable jacket or end fittings; the motor does not respond smoothly or fully to helm control input; or the cable has been kinked during installation or storage. A worn or kinked cable is a safety hazard and should be replaced before the next outing.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I use this cable for both throttle and shift functions?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. This is a universal-specification outboard control cable compatible with both throttle (engine speed) and shift (forward\/neutral\/reverse) control functions on single-lever and dual-lever helm control boxes. The cable end fitting and jacket specification are the same for both functions on most Japanese outboard motor brands.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the end fitting diameter on this cable?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The end fitting tip diameter is approximately 10.5mm (0.41\\\"), as measured by caliper. This matches the standard Japanese outboard control cable specification used by Yamaha, Suzuki, Honda Marine, and Tohatsu. If your existing cable has a different end fitting diameter or profile, contact us before ordering to confirm compatibility.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What lengths are available and which should I choose?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Available lengths are 4m (13.1\\'), 4.5m (14.8\\'), 5m (16.4\\'), 5.5m (18.0\\'), 6m (19.7\\'), and 6.5m (21.3\\'). Measure the routed cable path from your helm control box to the outboard motor, add 300\\u2013500mm of slack, and select the next length above that measurement. For most center console and tiller-extension setups, 4m to 5m is generally sufficient. For larger boats with the helm positioned far from the motor, 5.5m to 6.5m is typically required.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I cut this cable to a shorter length if needed?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"No. Outboard control cables should not be cut, as the end fittings are factory-crimped and the inner wire core requires specific termination to function correctly. Always select the correct length for your installation. If the cable is slightly longer than needed, route the excess in a gentle loop with a minimum bend radius of approximately 200mm (8\\\") to avoid kinking.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n\n\u003cdiv class=\"hdiy-desc\"\u003e\n\n  \u003ch2\u003eOutboard Throttle \u0026amp; Shift Control Cable — Japanese Import Specification, 4m–6.5m, for Yamaha, Suzuki, Honda \u0026amp; Tohatsu\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-overview\"\u003e\n    \u003cp\u003eA stiff, kinked, or corroded throttle and shift cable doesn’t just make your boat harder to control — it creates a genuine safety risk when the motor doesn’t respond cleanly to helm input at speed or in reverse. For boat owners, marine mechanics, and DIY riggers replacing worn control cables on Yamaha, Suzuki, Honda Marine, or Tohatsu outboards, this \u003cstrong\u003eoutboard throttle and shift control cable\u003c\/strong\u003e delivers smooth, consistent actuation from the helm to the motor with a Japanese-import specification end fitting that seats correctly in the OEM cable socket without modification.\u003c\/p\u003e\n    \u003cp\u003eEach unit is a single cable assembly sold individually. The cable consists of a \u003cstrong\u003estainless steel or galvanized steel inner wire core\u003c\/strong\u003e inside a \u003cstrong\u003elow-friction polymer liner\u003c\/strong\u003e, enclosed in a \u003cstrong\u003eUV-resistant marine-grade outer jacket\u003c\/strong\u003e. The end fitting tip diameter measures approximately \u003cstrong\u003e10.5mm (0.41\")\u003c\/strong\u003e, matching the standard Japanese outboard control cable specification. Available in six lengths: \u003cstrong\u003e4m (13.1’)\u003c\/strong\u003e, \u003cstrong\u003e4.5m (14.8’)\u003c\/strong\u003e, \u003cstrong\u003e5m (16.4’)\u003c\/strong\u003e, \u003cstrong\u003e5.5m (18.0’)\u003c\/strong\u003e, \u003cstrong\u003e6m (19.7’)\u003c\/strong\u003e, and \u003cstrong\u003e6.5m (21.3’)\u003c\/strong\u003e. To select the correct length, route a tape measure along the actual cable path from the helm control box to the motor, add \u003cstrong\u003e300–500mm (12–20\")\u003c\/strong\u003e of slack, and choose the next available length above that measurement.\u003c\/p\u003e\n    \u003cp\u003eThis cable is the right replacement for a \u003cstrong\u003eYamaha outboard throttle cable replacement\u003c\/strong\u003e on a center console fishing boat where the original cable has developed stiff spots or visible jacket cracking after years of saltwater exposure; a \u003cstrong\u003eHonda Marine shift cable replacement\u003c\/strong\u003e on a rigid inflatable boat (RIB) where the shift lever has become notchy and the motor is slow to engage forward or reverse; and a \u003cstrong\u003eTohatsu or Suzuki outboard control cable rerig\u003c\/strong\u003e on a boat where the helm has been relocated and a longer cable run is needed to reach the motor.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-compat\"\u003e\n    \u003cspan class=\"hdiy-compat-icon\"\u003e⛵\u003c\/span\u003e\n    \u003cstrong\u003eCompatible with:\u003c\/strong\u003e Yamaha, Suzuki Marine, Honda Marine, and Tohatsu outboard motors using the standard Japanese-specification control cable end fitting (approximately 10.5mm tip diameter). Compatible with single-lever and dual-lever helm control boxes for both throttle and shift functions. Select your required length from the Length option above.\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-note\"\u003e\n    \u003cspan class=\"hdiy-note-icon\"\u003e⚠️\u003c\/span\u003e\n    \u003cstrong\u003eLength Selection:\u003c\/strong\u003e Always measure the \u003cstrong\u003erouted cable path\u003c\/strong\u003e — not the straight-line distance — from helm to motor before selecting a length. A cable that is too short cannot be installed safely; a cable that is too long can be looped gently but \u003cstrong\u003emust not be kinked\u003c\/strong\u003e. Do not cut this cable.\n  \u003c\/div\u003e\n\n  \u003ch2\u003e✅ Key Features of These Outboard Throttle \u0026amp; Shift Control Cables\u003c\/h2\u003e\n  \u003cul class=\"hdiy-features\"\u003e\n    \u003cli\u003e\n      \u003cspan class=\"hdiy-icon\"\u003e🇯🇵\u003c\/span\u003e\n      \u003cspan\u003e\u003cstrong\u003eJapanese Import Specification End Fitting\u003c\/strong\u003e — The end fitting tip diameter of approximately \u003cstrong\u003e10.5mm (0.41\")\u003c\/strong\u003e matches the OEM cable socket specification used by Yamaha, Suzuki, Honda Marine, and Tohatsu, ensuring a secure, rattle-free seat in the control box and motor cable socket without adapters or modification.\u003c\/span\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cspan class=\"hdiy-icon\"\u003e🌊\u003c\/span\u003e\n      \u003cspan\u003e\u003cstrong\u003eLow-Friction Polymer Liner\u003c\/strong\u003e — The inner wire core runs inside a low-friction polymer liner that reduces actuation effort and eliminates the metal-on-metal wear that causes stiff spots in older cables — giving you smooth, consistent throttle and shift response on a \u003cstrong\u003eYamaha outboard single-lever control cable replacement\u003c\/strong\u003e.\u003c\/span\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cspan class=\"hdiy-icon\"\u003e🛡️\u003c\/span\u003e\n      \u003cspan\u003e\u003cstrong\u003eUV-Resistant Marine-Grade Outer Jacket\u003c\/strong\u003e — The outer jacket is formulated to resist UV degradation, moisture absorption, and saltwater exposure, maintaining flexibility and jacket integrity over multiple seasons of use on \u003cstrong\u003esaltwater fishing boat outboard control cables\u003c\/strong\u003e exposed to direct sun and spray.\u003c\/span\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cspan class=\"hdiy-icon\"\u003e📐\u003c\/span\u003e\n      \u003cspan\u003e\u003cstrong\u003eSix Lengths: 4m to 6.5m\u003c\/strong\u003e — Available in 0.5m increments from 4m (13.1’) to 6.5m (21.3’), covering the full range of helm-to-motor distances from compact center console boats to larger vessels with the helm positioned well forward of the transom — including \u003cstrong\u003elong-run outboard shift cable replacements\u003c\/strong\u003e for pontoon boats and walkarounds.\u003c\/span\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cspan class=\"hdiy-icon\"\u003e🔄\u003c\/span\u003e\n      \u003cspan\u003e\u003cstrong\u003eThrottle \u0026amp; Shift Dual-Function Compatible\u003c\/strong\u003e — The cable specification is the same for both throttle (engine speed) and shift (forward\/neutral\/reverse) control functions, so a single cable type covers both positions on a dual-cable helm control box — simplifying sourcing for a \u003cstrong\u003ecomplete outboard control cable set replacement\u003c\/strong\u003e.\u003c\/span\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cspan class=\"hdiy-icon\"\u003e🔧\u003c\/span\u003e\n      \u003cspan\u003e\u003cstrong\u003eDirect OEM-Style Replacement\u003c\/strong\u003e — Designed to replace the original equipment control cables supplied with Japanese outboard motors, restoring helm-to-motor response to factory specification without requiring modification to the control box, cable guide tubes, or motor cable socket on a \u003cstrong\u003eSuzuki or Honda Marine outboard cable rerig\u003c\/strong\u003e.\u003c\/span\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003e📐 Technical Specifications — Outboard Throttle \u0026amp; Shift Control Cable\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-table-wrap\"\u003e\n    \u003ctable\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eOutboard motor throttle and shift control cable\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCompatible Brands\u003c\/th\u003e\n\u003ctd\u003eYamaha, Suzuki Marine, Honda Marine, Tohatsu\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eEnd Fitting Tip Diameter\u003c\/th\u003e\n\u003ctd\u003eApproximately 10.5mm (0.41\")\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCable Specification\u003c\/th\u003e\n\u003ctd\u003eJapanese import specification (standard Japanese outboard control cable)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eInner Core Material\u003c\/th\u003e\n\u003ctd\u003eStainless steel or galvanized steel wire\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eLiner Material\u003c\/th\u003e\n\u003ctd\u003eLow-friction polymer\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eOuter Jacket Material\u003c\/th\u003e\n\u003ctd\u003eUV-resistant marine-grade polymer\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eAvailable Lengths\u003c\/th\u003e\n\u003ctd\u003e4m (13.1’) \/ 4.5m (14.8’) \/ 5m (16.4’) \/ 5.5m (18.0’) \/ 6m (19.7’) \/ 6.5m (21.3’)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eFunction Compatibility\u003c\/th\u003e\n\u003ctd\u003eThrottle control and shift control (both functions)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eHelm Control Box Compatibility\u003c\/th\u003e\n\u003ctd\u003eSingle-lever and dual-lever helm control boxes\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eEnvironment Rating\u003c\/th\u003e\n\u003ctd\u003eFreshwater and saltwater marine use\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCuttable\u003c\/th\u003e\n\u003ctd\u003eNo — factory-crimped end fittings; do not cut\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eSold As\u003c\/th\u003e\n\u003ctd\u003eSingle cable per order (select length above)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-faq\"\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I measure the correct cable length for my boat?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eRoute a length of rope or flexible tape along the \u003cstrong\u003eexact path the cable will follow\u003c\/strong\u003e from the helm control box to the outboard motor, following all bends and routing points without pulling tight around corners. Measure the total routed length. Add approximately \u003cstrong\u003e300–500mm (12–20\")\u003c\/strong\u003e of slack to allow for installation and adjustment. Select the next available cable length above that total. For example, if your routed measurement is 4.2m, select the \u003cstrong\u003e4.5m variant\u003c\/strong\u003e.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWill this cable fit my specific Yamaha outboard model?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eThis cable is designed to be compatible with Yamaha outboard motors that use the standard Japanese-specification throttle and shift cable end fitting (approximately \u003cstrong\u003e10.5mm diameter tip\u003c\/strong\u003e). It is also compatible with Suzuki, Honda Marine, and Tohatsu outboards that use the same cable interface standard. To confirm compatibility with your specific motor model and year, check your motor’s service manual for the cable part number and end fitting specification, or \u003cstrong\u003econtact us with your motor’s make, model, and year\u003c\/strong\u003e before ordering.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eIs this cable suitable for saltwater use?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eYes. The cable outer jacket is made from UV-resistant and moisture-resistant materials designed for marine use in both freshwater and saltwater environments. Rinse the cable and end fittings with fresh water after saltwater use and apply a light coat of \u003cstrong\u003emarine-grade cable lubricant\u003c\/strong\u003e periodically to maintain smooth operation and extend service life. Inspect the jacket annually for cracking or stiffness and replace if degradation is visible.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I know when my throttle or shift cable needs replacing?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eReplace the cable if you notice any of the following: \u003cstrong\u003estiff or jerky throttle or shift lever movement\u003c\/strong\u003e that does not improve with lubrication; visible kinking, fraying, or cracking on the cable jacket or end fittings; the motor does not respond smoothly or fully to helm control input; or the cable has been kinked during installation or storage. A worn or kinked cable is a safety hazard and should be replaced before the next outing.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan I use this cable for both throttle and shift functions?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eYes. This is a universal-specification outboard control cable compatible with both \u003cstrong\u003ethrottle (engine speed)\u003c\/strong\u003e and \u003cstrong\u003eshift (forward\/neutral\/reverse)\u003c\/strong\u003e control functions on single-lever and dual-lever helm control boxes. The cable end fitting and jacket specification are the same for both functions on most Japanese outboard motor brands, so one cable type covers both positions on a dual-cable control box.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat is the end fitting diameter on this cable?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eThe end fitting tip diameter is approximately \u003cstrong\u003e10.5mm (0.41\")\u003c\/strong\u003e, as measured by caliper. This matches the standard Japanese outboard control cable specification used by Yamaha, Suzuki, Honda Marine, and Tohatsu. If your existing cable has a different end fitting diameter or profile, contact us before ordering to confirm compatibility.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat lengths are available and which should I choose?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eAvailable lengths and their imperial equivalents:\u003c\/p\u003e\n        \u003cul class=\"hdiy-list\"\u003e\n          \u003cli\u003e\n\u003cstrong\u003e4m\u003c\/strong\u003e — 13.1’ — suitable for compact boats with helm close to the transom\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003e4.5m\u003c\/strong\u003e — 14.8’\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003e5m\u003c\/strong\u003e — 16.4’ — most common for center console and tiller-extension setups\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003e5.5m\u003c\/strong\u003e — 18.0’\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003e6m\u003c\/strong\u003e — 19.7’\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003e6.5m\u003c\/strong\u003e — 21.3’ — for larger boats with helm positioned well forward of the transom\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp\u003eMeasure the routed cable path, add 300–500mm of slack, and select the next length above that measurement.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan I cut this cable to a shorter length if needed?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003e\u003cstrong\u003eNo.\u003c\/strong\u003e Outboard control cables should not be cut, as the end fittings are factory-crimped and the inner wire core requires specific termination to function correctly. Always select the correct length for your installation. If the cable is slightly longer than needed, route the excess in a gentle loop with a \u003cstrong\u003eminimum bend radius of approximately 200mm (8\")\u003c\/strong\u003e to avoid kinking. Never fold or sharply bend the excess cable.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-cta\"\u003e\n    🛒 Select your cable length above, then add to cart.\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"HomeDIYer","offers":[{"title":"4m","offer_id":52371711459602,"sku":"HKTBCLA570001","price":180.0,"currency_code":"USD","in_stock":true},{"title":"4.5m","offer_id":52371711492370,"sku":"HKTBCLA570002","price":240.0,"currency_code":"USD","in_stock":true},{"title":"5m","offer_id":52371711525138,"sku":"HKTBCLA570003","price":245.0,"currency_code":"USD","in_stock":true},{"title":"5.5m","offer_id":52371711557906,"sku":"HKTBCLA570004","price":250.0,"currency_code":"USD","in_stock":true},{"title":"6m","offer_id":52371711590674,"sku":"HKTBCLA570005","price":255.0,"currency_code":"USD","in_stock":true},{"title":"6.5m","offer_id":52371711623442,"sku":"HKTBCLA570006","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/O1CN01WIFklU1DOqk9iZNhj__2213031320207.jpg?v=1781254783","url":"https:\/\/homediyer.com\/products\/outboard-throttle-shift-control-cable-yamaha-suzuki-honda-4m-6-5m","provider":"HomeDIYer","version":"1.0","type":"link"}