{"product_id":"phillips-flat-head-machine-screws-m2-m3-m5-m6-carbon-stainless-brass","title":"Phillips Flat Head Machine Screws M2.3 to M6 — Carbon Steel, Stainless \u0026 Brass, 7 Finishes","description":"\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I choose the right flat head screw length for my application?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"For countersunk flat head screws, the length is measured from the top of the head to the tip of the threads (total length including the head). Select a length so that the threaded portion engages at least 1.5\\u20132 times the thread diameter in the mating material. For example, an M3 flat head screw fastening a 2mm panel into a 6mm aluminum block would typically use an M3 x 8mm screw: 2mm for the panel plus at least 4.5mm of thread engagement. For through-hole applications with a nut, the screw should extend 2\\u20133 full threads past the nut face.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the difference between a flat head and a pan head machine screw?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"A flat head (countersunk) screw has a tapered underside that seats flush with the surface when installed in a countersunk hole, leaving no protrusion above the material. A pan head screw has a rounded top and a flat underside that sits on top of the surface. Flat head screws are used when a flush or recessed finish is required \\u2014 such as in furniture, electronics enclosures, and structural panels. Pan head screws are used when a flush finish is not required and the raised head provides a larger bearing surface.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Are these flat head screws suitable for outdoor or corrosive environments?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It depends on the finish selected. Stainless Steel offers good general corrosion resistance for outdoor and mildly humid environments. Carbon Steel with zinc plating (Black Zinc, White Zinc, Blue-White Zinc) provides moderate corrosion protection for indoor or sheltered use. Bright Chrome and Bright Nickel finishes are primarily decorative with moderate indoor corrosion resistance. Brass \/ Bright Nickel offers good corrosion resistance in non-marine environments and is commonly used in decorative and electrical applications. For marine or highly corrosive environments, stainless steel is generally the better choice.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What thread standards are M2.3, M2.5, M3, M5, and M6 compatible with?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"All sizes use ISO metric thread standards. Standard coarse pitches are: M2.3 (0.4mm pitch), M2.5 (0.45mm pitch), M3 (0.5mm pitch), M5 (0.8mm pitch), M6 (1.0mm pitch). These screws are compatible with standard metric nuts, threaded inserts, and tapped holes of the corresponding size and pitch. They are not compatible with UNC or UNF inch-standard threads. If you are tapping your own holes, use the corresponding metric tap for each size.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What countersink angle do these flat head screws use?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Phillips flat head machine screws typically use an 82\\u00b0 or 90\\u00b0 countersink angle depending on the manufacturing standard (DIN 965 uses 90\\u00b0; some US-style metric screws use 82\\u00b0). Contact us to confirm the countersink angle for your specific variant before machining countersunk holes, especially for precision applications where flush fit is critical.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How strong are these Phillips flat head machine screws?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Carbon steel flat head machine screws are generally rated to property class 4.8 or higher, with tensile strengths typically ranging from 420 MPa to 800 MPa depending on the specific grade. Stainless steel variants are generally rated to A2-70, with a tensile strength of approximately 700 MPa. Brass screws are generally softer, with tensile strengths typically in the range of 300\\u2013500 MPa, and are suited for light-duty fastening in decorative, electrical, and non-structural applications. Contact us to confirm the exact property class for your application.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"When should I choose Brass \/ Bright Nickel over Carbon Steel or Stainless Steel?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Brass \/ Bright Nickel flat head screws are a good choice when you need non-magnetic fasteners, good electrical conductivity, or a warm gold-toned decorative appearance. They are commonly used in electrical panels, musical instruments, decorative woodworking, and applications where galvanic corrosion between dissimilar metals is a concern. Brass is softer than carbon or stainless steel, so it is not suitable for high-load structural applications. The Bright Nickel plating adds a silver-toned decorative finish over the brass base.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n\n\u003cdiv class=\"hdiy-desc\"\u003e\n\n  \u003cdiv class=\"hdiy-overview\"\u003e\n    \u003ch2\u003ePhillips Flat Head Machine Screws M2.3 to M6 — Flush-Mount Fasteners in 7 Finishes Including Brass\u003c\/h2\u003e\n    \u003cp\u003eFinding Phillips flat head machine screws in the exact thread size, length, and finish you need — without ordering from multiple suppliers or settling for a generic assortment that skips the sizes your project actually requires — is a recurring frustration for furniture makers, electronics assemblers, woodworkers, and structural fabricators. These Phillips countersunk flat head machine screws are available across five thread diameters from M2.3 to M6, 18 size combinations from 4mm to 30mm, and 7 material and finish options including Brass \/ Bright Nickel, Bright Chrome, and Blue-White Zinc.\u003c\/p\u003e\n    \u003cp\u003eEach pack contains Phillips flat head (countersunk) machine screws in your selected material, finish, thread size, length, and quantity. Thread diameters span M2.3, M2.5, M3, M5, and M6 with ISO metric coarse pitch threading. Lengths range from 4mm (≈5\/32\") to 30mm (≈1-3\/16\") depending on the thread size selected. The flat head design features a tapered underside that seats flush with the surface when installed in a properly countersunk hole. Materials include Carbon Steel with Black Zinc, White Zinc, Blue-White Zinc, Bright Chrome, or Bright Nickel plating; Stainless Steel; and Brass with Bright Nickel plating. Packs are available in 100 or 200 pieces.\u003c\/p\u003e\n    \u003cp\u003eTypical use cases include furniture and cabinetry assembly where Phillips flat head screws in M3 to M6 sizes provide flush-mount fastening in wood, MDF, and plywood panels without protruding hardware; electronics and enclosure manufacturing where M2.3 to M3 countersunk screws secure PCB mounting plates, access panels, and chassis covers flush with the outer surface; and decorative or electrical applications where Brass \/ Bright Nickel flat head machine screws offer a non-magnetic, corrosion-resistant fastener with a warm metallic appearance for visible hardware in musical instruments, electrical panels, and architectural millwork.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-compat\"\u003e\n    \u003cspan class=\"hdiy-compat-icon\"\u003eℹ️\u003c\/span\u003e\n    \u003cstrong\u003eCompatibility:\u003c\/strong\u003e ISO metric coarse pitch threading — M2.3 (0.4mm), M2.5 (0.45mm), M3 (0.5mm), M5 (0.8mm), M6 (1.0mm). Flat head design requires a countersunk hole in the mating material for flush installation. Countersink angle is typically 90° (DIN 965) — contact us to confirm before machining precision countersinks.\n  \u003c\/div\u003e\n\n  \u003ch2\u003e✅ Key Features of These Phillips Flat Head Machine Screws\u003c\/h2\u003e\n  \u003cul class=\"hdiy-features\"\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔧\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eFlush-Mount Countersunk Head Design\u003c\/strong\u003e — The tapered flat head seats fully flush with the surface when installed in a countersunk hole, eliminating protrusion above the material — essential for furniture panels, electronics enclosures, and structural assemblies where a clean, snag-free surface finish is required.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🎺\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eBrass \/ Bright Nickel Option\u003c\/strong\u003e — The Brass \/ Bright Nickel variant provides a non-magnetic, electrically conductive flat head screw with a warm decorative finish — suited for electrical panels, musical instruments, architectural millwork, and applications where galvanic compatibility with brass or copper components is needed.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📐\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eFive Thread Diameters, 18 Size Combinations\u003c\/strong\u003e — Covering M2.3, M2.5, M3, M5, and M6 with lengths from 4mm (≈5\/32\") to 30mm (≈1-3\/16\"), this listing consolidates a wide range of Phillips countersunk machine screw sizes into a single source — reducing the number of separate orders needed for multi-size projects.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e✨\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eBright Chrome \u0026amp; Blue-White Zinc Finishes\u003c\/strong\u003e — The Bright Chrome finish delivers a mirror-like, scratch-resistant surface for visible flat head screws in consumer electronics and decorative assemblies. The Blue-White Zinc finish provides a dual-tone zinc coating with enhanced corrosion resistance compared to standard single-layer zinc plating.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🪨\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eStainless Steel for Corrosion-Resistant Applications\u003c\/strong\u003e — The Stainless Steel variant (available in M2.3 x 6mm and M6 x 8mm) provides corrosion resistance for outdoor, humid, or food-adjacent environments where carbon steel zinc-plated screws would be unsuitable — without the cost of full stainless hardware kits.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📦\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e100 or 200-Piece Bulk Packs\u003c\/strong\u003e — Available in 100 or 200-piece packs, these Phillips flat head machine screws are practical for production assembly, workshop stock replenishment, and project kits where buying individual screws from a hardware store is inefficient and cost-prohibitive.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003e📐 Technical Specifications — Phillips Flat Head Countersunk Machine Screws\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-table-wrap\"\u003e\n    \u003ctable\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003cth\u003eHead Style\u003c\/th\u003e\n\u003ctd\u003eFlat Head (Countersunk), Phillips Drive\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eDrive Type\u003c\/th\u003e\n\u003ctd\u003ePhillips — PH1 (M2.3, M2.5, M3) or PH2 (M5, M6) typically\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eThread Sizes Available\u003c\/th\u003e\n\u003ctd\u003eM2.3, M2.5, M3, M5, M6 (ISO metric coarse pitch)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eThread Pitch\u003c\/th\u003e\n\u003ctd\u003eM2.3: 0.4mm | M2.5: 0.45mm | M3: 0.5mm | M5: 0.8mm | M6: 1.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eAvailable Lengths\u003c\/th\u003e\n\u003ctd\u003eM2.3: 6mm (≈1\/4\") | M2.5: 16mm (≈5\/8\") | M3: 4mm, 6mm, 8mm, 25mm | M5: 8–30mm | M6: 6mm, 8mm, 13.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCountersink Angle\u003c\/th\u003e\n\u003ctd\u003eTypically 90° (DIN 965) — contact us to confirm\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eMaterial Options\u003c\/th\u003e\n\u003ctd\u003eCarbon Steel or Stainless Steel or Brass — see variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eFinish Options\u003c\/th\u003e\n\u003ctd\u003eBlack Zinc \/ White Zinc \/ Blue-White Zinc \/ Bright Chrome \/ Bright Nickel (Carbon Steel); Plain (Stainless Steel); Bright Nickel (Brass)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eTensile Strength\u003c\/th\u003e\n\u003ctd\u003eTypically 420–800 MPa (Carbon Steel); typically ≥700 MPa (Stainless A2-70); typically 300–500 MPa (Brass)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003ePack Quantities\u003c\/th\u003e\n\u003ctd\u003e100 or 200 pieces — see variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eContact us to confirm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-note\"\u003e\n    \u003cspan class=\"hdiy-note-icon\"\u003e⚠️\u003c\/span\u003e\n    \u003cstrong\u003eNote:\u003c\/strong\u003e Flat head screws require a countersunk hole in the mating material for flush installation — they will not sit flush in a standard through-hole. Countersink angle is typically 90° but verify before machining precision countersinks. Brass variants are softer than carbon or stainless steel — do not use in high-load structural applications. Use a correctly sized Phillips driver (PH1 for M2.3–M3, PH2 for M5–M6) to avoid cam-out.\n  \u003c\/div\u003e\n\n  \u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-faq\"\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I choose the right flat head screw length for my application?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eFor countersunk flat head screws, the length is measured from the top of the head to the tip of the threads (total length including the head). Select a length so that the threaded portion engages at least 1.5–2 times the thread diameter in the mating material. For example, an M3 flat head screw fastening a 2mm panel into a 6mm aluminum block would typically use an M3 x 8mm screw: 2mm for the panel plus at least 4.5mm of thread engagement. For through-hole applications with a nut, the screw should extend 2–3 full threads past the nut face. In inches: M3 x 8mm is approximately 5\/16\"; M5 x 20mm is approximately 25\/32\"; M6 x 25mm is approximately 1\".\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat is the difference between a flat head and a pan head machine screw?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eA flat head (countersunk) screw has a tapered underside that seats flush with the surface when installed in a countersunk hole, leaving no protrusion above the material. A pan head screw has a rounded top and a flat underside that sits on top of the surface. Flat head screws are used when a flush or recessed finish is required — such as in furniture, electronics enclosures, and structural panels. Pan head screws are used when a flush finish is not required and the raised head provides a larger bearing surface. If your application does not have a countersunk hole, use a pan head or button head screw instead.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eAre these flat head screws suitable for outdoor or corrosive environments?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eIt depends on the finish selected. Stainless Steel offers good general corrosion resistance for outdoor and mildly humid environments. Carbon Steel with zinc plating (Black Zinc, White Zinc, Blue-White Zinc) provides moderate corrosion protection for indoor or sheltered use. Bright Chrome and Bright Nickel finishes are primarily decorative with moderate indoor corrosion resistance. Brass \/ Bright Nickel offers good corrosion resistance in non-marine environments and is commonly used in decorative and electrical applications. For marine or highly corrosive environments, stainless steel is generally the better choice.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat thread standards are M2.3, M2.5, M3, M5, and M6 compatible with?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eAll sizes use ISO metric coarse pitch threading: M2.3 (0.4mm pitch), M2.5 (0.45mm pitch), M3 (0.5mm pitch), M5 (0.8mm pitch), M6 (1.0mm pitch). These screws are compatible with standard metric nuts, threaded inserts, and tapped holes of the corresponding size and pitch. They are \u003cem\u003enot\u003c\/em\u003e compatible with UNC or UNF inch-standard threads. If you are tapping your own holes, use the corresponding metric tap for each size. M2.3 is a less common size primarily used in miniature electronics and optical instruments — verify your existing hardware before ordering.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat countersink angle do these flat head screws use?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003ePhillips flat head machine screws typically use an 82° or 90° countersink angle depending on the manufacturing standard. DIN 965 (the most common metric standard for flat head machine screws) specifies a 90° countersink angle. Some US-style metric screws use 82°. Contact us to confirm the countersink angle for your specific variant before machining countersunk holes, especially for precision applications where a flush fit is critical. Using the wrong countersink angle will result in the head either sitting proud of the surface or sinking below it.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow strong are these Phillips flat head machine screws?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eCarbon steel flat head machine screws are generally rated to property class 4.8 or higher, with tensile strengths typically ranging from 420 MPa to 800 MPa depending on the specific grade. Stainless steel variants are generally rated to A2-70, with a tensile strength of approximately 700 MPa. Brass screws are generally softer, with tensile strengths typically in the range of 300–500 MPa, and are suited for light-duty fastening in decorative, electrical, and non-structural applications. Contact us to confirm the exact property class if your application has specific strength requirements.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhen should I choose Brass \/ Bright Nickel over Carbon Steel or Stainless Steel?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eBrass \/ Bright Nickel flat head screws are a good choice when you need non-magnetic fasteners, good electrical conductivity, or a warm gold-toned decorative appearance with a silver nickel finish. They are commonly used in electrical panels, musical instruments, decorative woodworking, and applications where galvanic corrosion between dissimilar metals is a concern. Brass is softer than carbon or stainless steel, so it is not suitable for high-load structural applications. The Bright Nickel plating adds a silver-toned decorative finish over the brass base, making these screws visually distinct from standard carbon steel nickel-plated variants.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-cta\"\u003e\n    🛒 Select your material, size, and quantity above, then add to cart — ships from our US warehouse.\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"HomeDIYer","offers":[{"title":"Stainless Steel \/ M2.3 x 6 mm \/ 100 PCS","offer_id":52285322887442,"sku":"GYJLTJLWJ05132x1","price":7.47,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ White Zinc \/ M2.5 x 16 mm \/ 100 PCS","offer_id":52285322920210,"sku":"GYJLTJLWJ05133x1","price":10.01,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Black Zinc \/ M3 x 4 mm \/ 100 PCS","offer_id":52285322952978,"sku":"GYJLTJLWJ05134x1","price":7.77,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Bright Chrome \/ M3 x 4 mm \/ 100 PCS","offer_id":52285322985746,"sku":"GYJLTJLWJ05135x1","price":8.31,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Black Zinc \/ M3 x 6 mm \/ 100 PCS","offer_id":52285323018514,"sku":"GYJLTJLWJ05136x1","price":8.36,"currency_code":"USD","in_stock":true},{"title":"Brass \/ Bright Nickel \/ M3 x 6 mm \/ 100 PCS","offer_id":52285323051282,"sku":"GYJLTJLWJ05137x1","price":11.15,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Bright Chrome \/ M3 x 8 mm \/ 100 PCS","offer_id":52285323084050,"sku":"GYJLTJLWJ05139x1","price":9.51,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Blue-White Zinc \/ M3 x 25 mm \/ 100 PCS","offer_id":52285323116818,"sku":"GYJLTJLWJ05140x1","price":15.84,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Bright Chrome \/ M5 x 8 mm \/ 100 PCS","offer_id":52285323149586,"sku":"GYJLTJLWJ05120x1","price":28.51,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Black Zinc \/ M5 x 10 mm \/ 100 PCS","offer_id":52285323182354,"sku":"GYJLTJLWJ05121x1","price":29.91,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Bright Chrome \/ M5 x 12 mm \/ 100 PCS","offer_id":52285323215122,"sku":"GYJLTJLWJ05122x1","price":35.74,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Bright Nickel \/ M5 x 15 mm \/ 100 PCS","offer_id":52285323247890,"sku":"GYJLTJLWJ05123x1","price":36.04,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Black Zinc \/ M5 x 16 mm \/ 100 PCS","offer_id":52285323280658,"sku":"GYJLTJLWJ05124x1","price":39.48,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Black Zinc \/ M5 x 20 mm \/ 100 PCS","offer_id":52285323313426,"sku":"GYJLTJLWJ05125x1","price":41.58,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Bright Nickel \/ M5 x 22 mm \/ 100 PCS","offer_id":52285323346194,"sku":"GYJLTJLWJ05126x1","price":42.02,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Black Zinc \/ M5 x 25 mm \/ 100 PCS","offer_id":52285323378962,"sku":"GYJLTJLWJ05127x1","price":46.96,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Black Zinc \/ M5 x 30 mm \/ 100 PCS","offer_id":52285323411730,"sku":"GYJLTJLWJ05128x1","price":52.89,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Bright Nickel \/ M6 x 6 mm \/ 100 PCS","offer_id":52285323444498,"sku":"GYJLTJLWJ05129x1","price":33.59,"currency_code":"USD","in_stock":true},{"title":"Stainless Steel \/ M6 x 8 mm \/ 100 PCS","offer_id":52285323477266,"sku":"GYJLTJLWJ05130x1","price":34.54,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Black Zinc \/ M6 x 13.5 mm \/ 100 PCS","offer_id":52285323510034,"sku":"GYJLTJLWJ05131x1","price":53.24,"currency_code":"USD","in_stock":true},{"title":"Stainless Steel \/ M2.3 x 6 mm \/ 200 PCS","offer_id":52285323542802,"sku":"GYJLTJLWJ05132x2","price":14.05,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ White Zinc \/ M2.5 x 16 mm \/ 200 PCS","offer_id":52285323575570,"sku":"GYJLTJLWJ05133x2","price":18.63,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Black Zinc \/ M3 x 4 mm \/ 200 PCS","offer_id":52285323608338,"sku":"GYJLTJLWJ05134x2","price":14.05,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Bright Chrome \/ M3 x 4 mm \/ 200 PCS","offer_id":52285323641106,"sku":"GYJLTJLWJ05135x2","price":15.19,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Black Zinc \/ M3 x 6 mm \/ 200 PCS","offer_id":52285323673874,"sku":"GYJLTJLWJ05136x2","price":15.34,"currency_code":"USD","in_stock":true},{"title":"Brass \/ Bright Nickel \/ M3 x 6 mm \/ 200 PCS","offer_id":52285323706642,"sku":"GYJLTJLWJ05137x2","price":20.88,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Bright Chrome \/ M3 x 8 mm \/ 200 PCS","offer_id":52285323739410,"sku":"GYJLTJLWJ05139x2","price":17.64,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Blue-White Zinc \/ M3 x 25 mm \/ 200 PCS","offer_id":52285323772178,"sku":"GYJLTJLWJ05140x2","price":30.36,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Bright Chrome \/ M5 x 8 mm \/ 200 PCS","offer_id":52285323804946,"sku":"GYJLTJLWJ05120x2","price":55.64,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Black Zinc \/ M5 x 10 mm \/ 200 PCS","offer_id":52285323837714,"sku":"GYJLTJLWJ05121x2","price":58.33,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Bright Chrome \/ M5 x 12 mm \/ 200 PCS","offer_id":52285323870482,"sku":"GYJLTJLWJ05122x2","price":70.0,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Bright Nickel \/ M5 x 15 mm \/ 200 PCS","offer_id":52285323903250,"sku":"GYJLTJLWJ05123x2","price":70.6,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Black Zinc \/ M5 x 16 mm \/ 200 PCS","offer_id":52285323936018,"sku":"GYJLTJLWJ05124x2","price":77.48,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Black Zinc \/ M5 x 20 mm \/ 200 PCS","offer_id":52285323968786,"sku":"GYJLTJLWJ05125x2","price":81.67,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Bright Nickel \/ M5 x 22 mm \/ 200 PCS","offer_id":52285324001554,"sku":"GYJLTJLWJ05126x2","price":82.57,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Black Zinc \/ M5 x 25 mm \/ 200 PCS","offer_id":52285324034322,"sku":"GYJLTJLWJ05127x2","price":92.44,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Black Zinc \/ M5 x 30 mm \/ 200 PCS","offer_id":52285324067090,"sku":"GYJLTJLWJ05128x2","price":104.35,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Bright Nickel \/ M6 x 6 mm \/ 200 PCS","offer_id":52285324099858,"sku":"GYJLTJLWJ05129x2","price":65.76,"currency_code":"USD","in_stock":true},{"title":"Stainless Steel \/ M6 x 8 mm \/ 200 PCS","offer_id":52285324132626,"sku":"GYJLTJLWJ05130x2","price":67.61,"currency_code":"USD","in_stock":true},{"title":"Carbon Steel \/ Black Zinc \/ M6 x 13.5 mm \/ 200 PCS","offer_id":52285324165394,"sku":"GYJLTJLWJ05131x2","price":105.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/Picture1of22_60393258-4b88-4774-bd2e-83b6809acd01.jpg?v=1780502946","url":"https:\/\/homediyer.com\/products\/phillips-flat-head-machine-screws-m2-m3-m5-m6-carbon-stainless-brass","provider":"HomeDIYer","version":"1.0","type":"link"}