{"product_id":"pocket-hole-screws-1-1-4-inch-8-coarse-thread-zinc-plated-100pcs","title":"Pocket Hole Screws 1-1\/4\" #8 Coarse Thread Zinc Plated 100Pcs with Square Drive Bit","description":"\u003cdiv class=\"hdiy-desc\"\u003e\n\n  \u003cdiv class=\"hdiy-overview\"\u003e\n    \u003ch2\u003ePocket Hole Screws 1-1\/4\" — Tight Joints, Zero Stripped Heads\u003c\/h2\u003e\n    \u003cp\u003eCabinet doors that sag, face frames that split, furniture joints that loosen over time — these are the frustrations that stop DIYers mid-build. These \u003cstrong\u003e1-1\/4\" pocket hole screws\u003c\/strong\u003e are purpose-built for pocket hole joinery, giving woodworkers and weekend makers a reliable fastener that drives clean and holds firm. The zinc-plated carbon steel construction resists corrosion, while the washer head seats flush inside the counterbore every time.\u003c\/p\u003e\n    \u003cp\u003eEach screw features a smooth shank, aggressive coarse threads, and a sharp self-tapping point — the same three-part geometry visible in the product images. The pack includes 100 screws (#8 × 1-1\/4\") plus one 100 mm magnetic square drive bit with a standard 1\/4\" hex shank, so you can start driving immediately.\u003c\/p\u003e\n    \u003cp\u003eSized for 3\/4\" stock, these screws are the go-to choice for cabinet boxes, face frames, table aprons, bed rails, and closet shelving — anywhere a strong, hidden joint matters.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-compat\"\u003e\n    \u003cspan class=\"hdiy-compat-icon\"\u003e✅\u003c\/span\u003e Compatible with all pocket hole jigs (Kreg and similar) · Fits standard 1\/4\" hex drill\/driver and impact driver · Designed for 3\/4\" thick softwood and hardwood stock\n  \u003c\/div\u003e\n\n  \u003ch2\u003eKey Features\u003c\/h2\u003e\n  \u003cul class=\"hdiy-features\"\u003e\n    \u003cli\u003e\u003cspan\u003e🔘 \u003cstrong\u003eWasher Head — Flush Seating Every Time\u003c\/strong\u003e — The wide washer head is engineered specifically for pocket hole counterbores. It prevents over-driving, distributes clamping force evenly, and leaves a clean, professional surface without cracking the workpiece.\u003c\/span\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cspan\u003e🔲 \u003cstrong\u003eFour-Edge Square Drive — No Cam-Out\u003c\/strong\u003e — The deep four-edge square recess locks onto the included bit with four contact points, eliminating the sliding and stripping common with Phillips heads. Consistent torque transfer even at high drill speeds.\u003c\/span\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cspan\u003e🔩 \u003cstrong\u003eAggressive Coarse Thread + Smooth Shank\u003c\/strong\u003e — Coarse threads bite hard into wood fibers for maximum pull-out resistance, while the smooth shank above the threads prevents the joint from splitting as the screw seats. Confirmed by the close-up thread detail in the product images.\u003c\/span\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cspan\u003e⚡ \u003cstrong\u003eSharp Self-Tapping Point\u003c\/strong\u003e — The needle-sharp tip starts without wandering and drives smoothly into softwood and hardwood alike. A pocket hole (pilot hole) is still required — the self-tapping point eliminates the need for a separate pilot within the pocket itself.\u003c\/span\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cspan\u003e🛡️ \u003cstrong\u003eZinc-Plated Carbon Steel — Anti-Corrosion \u0026amp; Durable\u003c\/strong\u003e — Full zinc coating provides anti-corrosion protection for indoor projects. The carbon steel core resists bending and breakage under torque, keeping joints tight for years of use.\u003c\/span\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cspan\u003e🧲 \u003cstrong\u003e100 mm Magnetic Square Drive Bit Included\u003c\/strong\u003e — The free drive bit features a magnetic square tip that holds screws in place during positioning, plus a standard 1\/4\" magnetic hex shank compatible with all drills and impact drivers. The 100 mm length reaches deep into tight jig positions.\u003c\/span\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n  \u003cul class=\"hdiy-list\"\u003e\n    \u003cli\u003e100 × #8 × 1-1\/4\" pocket hole screws (zinc-plated carbon steel, washer head, coarse thread)\u003c\/li\u003e\n    \u003cli\u003e1 × 100 mm magnetic square drive bit (1\/4\" hex shank)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eWho Is This For\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-usecases\"\u003e\n    \u003cdiv class=\"hdiy-usecase-item\"\u003e\n      \u003cstrong\u003e🪑 Furniture Builders\u003c\/strong\u003e — Assemble dining tables, chairs, and bed frames with invisible pocket joints that hold under daily load. The 1-1\/4\" length is the standard choice for 3\/4\" thick legs and aprons.\n    \u003c\/div\u003e\n    \u003cdiv class=\"hdiy-usecase-item\"\u003e\n      \u003cstrong\u003e🗄️ Cabinet Makers\u003c\/strong\u003e — Join face frames, drawer fronts, and cabinet boxes cleanly and quickly. The washer head prevents blowout on plywood and MDF edges.\n    \u003c\/div\u003e\n    \u003cdiv class=\"hdiy-usecase-item\"\u003e\n      \u003cstrong\u003e🔧 Weekend DIYers\u003c\/strong\u003e — No need to buy a separate driver bit. Everything in one box means you can drill your pocket holes and start driving screws in the same session.\n    \u003c\/div\u003e\n    \u003cdiv class=\"hdiy-usecase-item\"\u003e\n      \u003cstrong\u003e🏠 Home Improvement Enthusiasts\u003c\/strong\u003e — Build closet shelving, wall-mounted storage, and trim work with strong 90° and flat joints that stay tight over time.\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-table-wrap\"\u003e\n    \u003ctable\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003cth\u003eScrew Size\u003c\/th\u003e\n\u003ctd\u003e#8 × 1-1\/4\" (31.75 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eHead Type\u003c\/th\u003e\n\u003ctd\u003eWasher head (pocket hole specific)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eDrive Type\u003c\/th\u003e\n\u003ctd\u003eSquare drive (Robertson) — 4-edge\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eThread Type\u003c\/th\u003e\n\u003ctd\u003eCoarse thread with smooth shank\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003ePoint Type\u003c\/th\u003e\n\u003ctd\u003eSharp self-tapping tip\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCarbon steel with zinc plating\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eZinc plated — anti-corrosion, waterproof coating\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eRecommended Stock Thickness\u003c\/th\u003e\n\u003ctd\u003e3\/4\" (19 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e100 screws\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eIncluded Accessories\u003c\/th\u003e\n\u003ctd\u003e1 × 100 mm magnetic square drive bit (1\/4\" hex shank)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eIndoor woodworking: cabinets, tables, beds, face frames, shelving\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eJoint Types\u003c\/th\u003e\n\u003ctd\u003e90° corner joints, flat butt joints\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003ePilot Hole Required\u003c\/th\u003e\n\u003ctd\u003eYes — use a pocket hole jig\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-faq\"\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eDo I need a pocket hole jig to use these screws?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003eYes. These screws are designed for pocket hole joinery, which requires a pocket hole jig to drill the angled counterbored hole. The self-tapping tip eliminates a separate pilot hole inside the pocket, but the pocket itself must be drilled with a jig first.\u003c\/div\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat material thickness are these screws designed for?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003eThe 1-1\/4\" length is optimized for joining 3\/4\" thick stock — the most common thickness for plywood, MDF, and solid wood used in cabinet and furniture builds. For thinner material (1\/2\"), shorter screws are recommended.\u003c\/div\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eIs the included drive bit magnetic?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003eYes. The 100 mm square drive bit has a magnetic tip that holds screws in place during positioning, and a magnetic 1\/4\" hex shank that locks into most drills and impact drivers. This is confirmed by the product image showing the magnetic square and hex head details.\u003c\/div\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eCan I use these screws with an impact driver?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003eYes. The included 100 mm bit has a standard 1\/4\" hex shank compatible with all impact drivers, drills, and screw guns. The four-edge square drive resists cam-out even at high impact torque.\u003c\/div\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eAre these screws suitable for outdoor use?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003eThese screws are zinc-plated for anti-corrosion and waterproof protection, making them suitable for indoor projects and protected outdoor spaces. For fully exposed exterior applications subject to direct rain, stainless steel screws are generally recommended.\u003c\/div\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat joint types can I make with these screws?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003eThese screws support both 90° corner joints (for cabinet boxes, face frames, and furniture corners) and flat butt joints (for edge-to-edge panel connections). Both joint types are illustrated in the product images.\u003c\/div\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eWill the coarse thread split my wood?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003eThe smooth shank above the thread zone is specifically designed to prevent splitting as the screw seats. The coarse threads engage only in the receiving board, not the clamped board, which is the standard pocket hole joinery technique that minimizes splitting risk.\u003c\/div\u003e\n    \u003c\/details\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-cta\"\u003e\n    100 screws + magnetic drive bit in one box — drill your pocket holes and start building today.\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"HomeDIYer","offers":[{"title":"Default Title","offer_id":52230468010258,"sku":"GBTST0229","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/61f-ayy2ZxL_3.jpg?v=1777450535","url":"https:\/\/homediyer.com\/products\/pocket-hole-screws-1-1-4-inch-8-coarse-thread-zinc-plated-100pcs","provider":"HomeDIYer","version":"1.0","type":"link"}