{"product_id":"pvc-tee-drain-pipe-connector-inspection-port-50mm-200mm","title":"PVC Tee Drain Pipe Connector With Inspection Port Fittings Adapters 50mm-200mm","description":"\u003cdiv class=\"hdiy-desc\"\u003e\n\n  \u003cdiv class=\"hdiy-overview\"\u003e\n    \u003ch2\u003ePVC Tee Drain Pipe Connector with Inspection Port — Reliable Access for Every Drain System\u003c\/h2\u003e\n    \u003cp\u003eWhen a blocked drain turns a routine maintenance call into a costly excavation, the right fitting makes all the difference. This PVC tee drain pipe connector with inspection port is designed for plumbers, contractors, and serious DIYers who need dependable access points built directly into their drainage runs — without cutting into finished pipework later.\u003c\/p\u003e\n    \u003cp\u003eEach connector is molded from rigid PVC (polyvinyl chloride), offering a smooth internal bore and consistent wall thickness across all sizes. Available in five diameters — 50mm (approx. 2 in), 75mm (approx. 3 in), 110mm (approx. 4 in), 160mm (approx. 6 in), and 200mm (approx. 8 in) — these tee fittings accommodate the most common residential and commercial drain pipe sizes. The integrated inspection port accepts a standard screw cap for sealed, odor-free operation between service intervals.\u003c\/p\u003e\n    \u003cp\u003eTypical applications include underground soil and waste drain lines, horizontal drain runs beneath concrete slabs, stormwater drainage systems requiring periodic rodding access, and commercial kitchen or bathroom drain manifolds where inspection port tee fittings for PVC drain pipe are essential for code compliance and long-term serviceability.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-compat\"\u003e\n    \u003cspan class=\"hdiy-compat-icon\"\u003e🔗\u003c\/span\u003e\n    \u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed to fit standard PVC drain pipe systems. Confirm your pipe's outer diameter before ordering. Solvent-weld or push-fit connection method — see variant options for your size.\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-features\"\u003e\n    \u003ch2\u003e✅ Key Features of These PVC Tee Drain Pipe Connectors with Inspection Port\u003c\/h2\u003e\n    \u003cul class=\"hdiy-list\"\u003e\n      \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔍\u003c\/span\u003e\u003cstrong\u003eIntegrated Inspection Port\u003c\/strong\u003e — Built-in access cap allows rodding and inspection without cutting into the pipe, saving time on maintenance and blockage clearance.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📐\u003c\/span\u003e\u003cstrong\u003eFive Size Options (50mm–200mm)\u003c\/strong\u003e — Covers the full range of standard residential and commercial drain diameters from 50mm (2 in) up to 200mm (8 in) for versatile installation.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🧱\u003c\/span\u003e\u003cstrong\u003eRigid PVC Construction\u003c\/strong\u003e — Molded from durable PVC for resistance to common drain chemicals, root intrusion pressure, and long-term underground burial conditions.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e💧\u003c\/span\u003e\u003cstrong\u003eSmooth Internal Bore\u003c\/strong\u003e — Consistent internal diameter minimizes flow restriction and reduces debris accumulation at the tee junction.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔒\u003c\/span\u003e\u003cstrong\u003eSealed Cap Design\u003c\/strong\u003e — Screw-type inspection port cap provides an odor-tight seal between service intervals, maintaining system integrity.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🏗️\u003c\/span\u003e\u003cstrong\u003eSuitable for Buried and Above-Ground Runs\u003c\/strong\u003e — Rated for both underground soil drain installations and exposed above-slab drain manifold configurations.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-table-wrap\"\u003e\n    \u003ch2\u003e📐 Technical Specifications — PVC Tee Drain Pipe Connector\u003c\/h2\u003e\n    \u003ctable\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRigid PVC (Polyvinyl Chloride)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eAvailable Sizes\u003c\/th\u003e\n\u003ctd\u003e50mm \/ 75mm \/ 110mm \/ 160mm \/ 200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eApproximate Inch Equivalents\u003c\/th\u003e\n\u003ctd\u003e2 in \/ 3 in \/ 4 in \/ 6 in \/ 8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eFitting Type\u003c\/th\u003e\n\u003ctd\u003eTee with Inspection Port\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eConnection Method\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eWall Thickness\u003c\/th\u003e\n\u003ctd\u003eSee variant options\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eInspection Port Cap\u003c\/th\u003e\n\u003ctd\u003eScrew-type, included\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eWhite \/ Grey (see variant options)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eSoil, waste, and stormwater drain systems\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eInstallation Environment\u003c\/th\u003e\n\u003ctd\u003eUnderground burial and above-ground\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eQuantity per Order\u003c\/th\u003e\n\u003ctd\u003e1 Pc\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-faq\"\u003e\n    \u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I choose the right size for my drain pipe?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eMeasure the outer diameter (OD) of your existing drain pipe. Match it to the available sizes: 50mm (~2 in), 75mm (~3 in), 110mm (~4 in), 160mm (~6 in), or 200mm (~8 in). If you are unsure, check the pipe markings or consult your local plumbing code for standard drain sizes in your application.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan this fitting be used for underground burial?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eYes. Rigid PVC is widely used for underground drain and soil pipe installations. The material resists moisture, common drain chemicals, and moderate soil pressure. Ensure proper bedding and backfill practices are followed per your local installation standards.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eIs the inspection port cap included, and is it watertight?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eYes, a screw-type inspection port cap is included with each fitting. When properly tightened, it provides an odor-tight and water-resistant seal suitable for standard drain system operating pressures. It is not rated for pressurized water supply lines.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat is the chemical resistance of PVC drain fittings?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003ePVC offers good resistance to most household and commercial drain chemicals including diluted acids, alkalis, detergents, and common cleaning agents. It is not recommended for use with concentrated solvents or high-temperature discharge above approximately 60°C (140°F).\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eIs this compatible with both solvent-weld and push-fit pipe systems?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eConnection compatibility depends on the specific variant. Please check the product variant details or contact us to confirm whether your size is available in solvent-weld, push-fit, or both configurations before purchasing.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan I use this fitting for stormwater drainage as well as soil\/waste?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eYes. This PVC tee connector with inspection port is suitable for stormwater drainage, soil and waste drain runs, and general surface water management systems. Verify that the selected size matches your stormwater pipe specification and that local codes permit PVC for your intended application.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I access the inspection port for rodding or blockage clearance?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\u003cp\u003eUnscrew the inspection port cap by hand or with a strap wrench if it has been in service for an extended period. Insert a drain rod or inspection camera through the port opening to clear blockages or inspect the downstream pipe. Replace and hand-tighten the cap after servicing.\u003c\/p\u003e\u003c\/div\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-cta\"\u003e\n    🛒 Select your size (50mm–200mm) above, then add to cart.\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I choose the right size for my drain pipe?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Measure the outer diameter (OD) of your existing drain pipe. Match it to the available sizes: 50mm (~2 in), 75mm (~3 in), 110mm (~4 in), 160mm (~6 in), or 200mm (~8 in). If you are unsure, check the pipe markings or consult your local plumbing code for standard drain sizes in your application.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can this fitting be used for underground burial?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. Rigid PVC is widely used for underground drain and soil pipe installations. The material resists moisture, common drain chemicals, and moderate soil pressure. Ensure proper bedding and backfill practices are followed per your local installation standards.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is the inspection port cap included, and is it watertight?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, a screw-type inspection port cap is included with each fitting. When properly tightened, it provides an odor-tight and water-resistant seal suitable for standard drain system operating pressures. It is not rated for pressurized water supply lines.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the chemical resistance of PVC drain fittings?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"PVC offers good resistance to most household and commercial drain chemicals including diluted acids, alkalis, detergents, and common cleaning agents. It is not recommended for use with concentrated solvents or high-temperature discharge above approximately 60°C (140°F).\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is this compatible with both solvent-weld and push-fit pipe systems?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Connection compatibility depends on the specific variant. Please check the product variant details or contact us to confirm whether your size is available in solvent-weld, push-fit, or both configurations before purchasing.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I use this fitting for stormwater drainage as well as soil\/waste?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. This PVC tee connector with inspection port is suitable for stormwater drainage, soil and waste drain runs, and general surface water management systems. Verify that the selected size matches your stormwater pipe specification and that local codes permit PVC for your intended application.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I access the inspection port for rodding or blockage clearance?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Unscrew the inspection port cap by hand or with a strap wrench if it has been in service for an extended period. Insert a drain rod or inspection camera through the port opening to clear blockages or inspect the downstream pipe. Replace and hand-tighten the cap after servicing.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"HomeDIYer","offers":[{"title":"50mm \/ 1 Pcs","offer_id":52332011651346,"sku":"GLFBQLWGLBZSJ021011x1","price":8.69,"currency_code":"USD","in_stock":true},{"title":"75mm \/ 1 Pcs","offer_id":52332011684114,"sku":"GLFBQLWGLBZSJ021012x1","price":17.8,"currency_code":"USD","in_stock":true},{"title":"110mm \/ 1 Pcs","offer_id":52332011716882,"sku":"GLFBQLWGLBZSJ021013x1","price":36.84,"currency_code":"USD","in_stock":true},{"title":"160mm \/ 1 Pcs","offer_id":52332011749650,"sku":"GLFBQLWGLBZSJ021014x1","price":83.3,"currency_code":"USD","in_stock":true},{"title":"200mm \/ 1 Pcs","offer_id":52332011782418,"sku":"GLFBQLWGLBZSJ021015x1","price":189.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/Picture1of6_b0561925-7b79-430a-a3ca-f7740e56d802.jpg?v=1782108734","url":"https:\/\/homediyer.com\/products\/pvc-tee-drain-pipe-connector-inspection-port-50mm-200mm","provider":"HomeDIYer","version":"1.0","type":"link"}