{"product_id":"red-adhesive-lined-heat-shrink-end-caps-2-1-wire-sealing","title":"Red Adhesive-Lined Heat Shrink End Caps 2:1 — Wire Sealing, Multiple Sizes","description":"\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I choose the right end cap size for my wire?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Each size lists a recommended wire diameter range — for example, the 8×25mm cap fits wire diameters of 5mm–7mm (approximately 3\/16\\\"–9\/32\\\"). Match your wire's outer diameter (including insulation) to the 'Fit For Wire Dia' range shown in the variant name. When in doubt, size down slightly so the adhesive liner seals tightly around the conductor.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the shrink ratio and what does 2:1 mean?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"A 2:1 shrink ratio means the cap's inner diameter will shrink to approximately half its original size when heat is applied. This ensures a snug mechanical grip on the wire end. The adhesive liner melts simultaneously to create a watertight seal.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Are these end caps waterproof and suitable for outdoor or marine use?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The hot-melt adhesive inner liner flows into gaps and voids as it melts, creating a moisture-resistant seal around the wire end. These caps are generally suitable for outdoor, marine, and automotive environments where moisture ingress is a concern. For fully submerged or high-pressure applications, confirm suitability with your specific installation requirements.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What temperature do I need to shrink these caps?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Polyolefin heat shrink end caps typically activate at around 70–90°C (158–194°F) and fully shrink at approximately 120°C (248°F). A standard heat gun on a low-to-medium setting works well. Avoid open flames, which can scorch the material unevenly.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I use these on stranded wire, solid wire, or cable bundles?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. These end caps work on stranded wire, solid wire, and small cable bundles. The adhesive liner conforms to irregular surfaces, making them effective for sealing multi-conductor cables and rope-lay conductors. Just ensure the total outer diameter of the bundle falls within the listed wire diameter range for the chosen size.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I apply a heat shrink end cap correctly?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Slide the open end of the cap over the wire end so the conductor tip sits near the closed bottom. Apply heat evenly from the closed end toward the open end using a heat gun. The cap will shrink inward and the adhesive will flow to seal the wire. Allow to cool for 30–60 seconds before handling.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the difference between a heat shrink end cap and regular heat shrink tubing?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Regular heat shrink tubing is open at both ends and is used to insulate or bundle wires along their length. A heat shrink end cap is closed at one end, designed specifically to seal and protect the cut or stripped tip of a wire or cable — preventing moisture, corrosion, and short circuits at the termination point.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n\n\u003cdiv class=\"hdiy-desc\"\u003e\n\n  \u003cdiv class=\"hdiy-overview\"\u003e\n    \u003ch2\u003eRed Adhesive-Lined Heat Shrink End Caps — Reliable Wire End Sealing for Demanding Environments\u003c\/h2\u003e\n    \u003cp\u003eExposed wire ends are one of the most overlooked failure points in electrical installations. Whether you're finishing a marine wiring harness, capping unused conductors in an automotive build, or protecting outdoor cable runs from moisture and corrosion, an unsealed wire tip invites oxidation, short circuits, and eventual failure. These red adhesive-lined heat shrink end caps give electricians, DIYers, and automotive technicians a clean, durable solution for sealing wire ends in a single step.\u003c\/p\u003e\n    \u003cp\u003eEach cap features a dual-layer construction: a flexible polyolefin outer shell with a 2:1 shrink ratio, and a hot-melt adhesive inner liner that flows into voids as heat is applied. Available in 14 sizes ranging from 8×25mm (≈5\/16\"×1\") to 50×70mm (≈2\"×2-3\/4\"), with wire diameter compatibility from 5mm (≈3\/16\") up to 45mm (≈1-3\/4\"). Sold in packs of 1, 2, 5, 10, 20, 30, or 50 pieces so you can stock exactly what your project requires.\u003c\/p\u003e\n    \u003cp\u003eTypical use cases include sealing the cut ends of marine battery cables to prevent saltwater corrosion, capping spare conductors in automotive wiring looms to prevent chafing shorts, and protecting outdoor low-voltage landscape lighting wire ends from seasonal moisture. The bright red color also serves as a quick visual indicator for terminated or capped conductors during inspection.\u003c\/p\u003e\n    \u003cdiv class=\"hdiy-note\"\u003e\n      \u003cspan class=\"hdiy-note-icon\"\u003e⚠️\u003c\/span\u003e\n      \u003cstrong\u003eSize selection tip:\u003c\/strong\u003e Match your wire's \u003cem\u003eouter diameter including insulation\u003c\/em\u003e to the \"Fit For Wire Dia\" range listed in each variant. When between sizes, choose the smaller cap for a tighter adhesive seal.\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-compat\"\u003e\n    \u003cspan class=\"hdiy-compat-icon\"\u003e✅\u003c\/span\u003e\n    Compatible with stranded wire, solid wire, and multi-conductor cable bundles. Suitable for automotive, marine, outdoor, and low-voltage electrical applications. Works with any standard heat gun.\n  \u003c\/div\u003e\n\n  \u003ch2\u003e✅ Key Features of These Red Adhesive-Lined Heat Shrink End Caps\u003c\/h2\u003e\n  \u003cul class=\"hdiy-features\"\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔒\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eClosed-End Waterproof Seal\u003c\/strong\u003e — The sealed tip completely encloses the wire end, blocking moisture ingress and preventing corrosion at cable termination points in marine and outdoor wiring.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🔥\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eDual-Layer Adhesive Construction\u003c\/strong\u003e — Hot-melt adhesive inner liner melts and flows around conductors during shrinking, creating a mechanical bond that resists pull-out and vibration loosening in automotive wire harness applications.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📐\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e14 Sizes, One Consistent Standard\u003c\/strong\u003e — From 8×25mm (wire dia 5–7mm) to 50×70mm (wire dia 35–45mm), the full size range covers light-gauge hookup wire through heavy battery cable end sealing without switching product families.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e🎨\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eHigh-Visibility Red Color\u003c\/strong\u003e — The red finish makes capped wire ends easy to identify during inspection and troubleshooting, a practical advantage in dense wiring panels and junction boxes.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e⚡\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e2:1 Shrink Ratio for Secure Fit\u003c\/strong\u003e — The 2:1 ratio ensures the cap grips the wire firmly after shrinking, reducing the risk of the cap slipping off before the adhesive fully cures — important for overhead or vertical cable runs.\u003c\/span\u003e\n\u003c\/li\u003e\n    \u003cli\u003e\n\u003cspan class=\"hdiy-icon\"\u003e📦\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eFlexible Pack Quantities\u003c\/strong\u003e — Available in 1, 2, 5, 10, 20, 30, or 50-piece packs, letting you buy a sample quantity for a single repair or stock up for production wiring work without overpaying for bulk minimums.\u003c\/span\u003e\n\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003e📐 Technical Specifications — Heat Shrink End Caps\u003c\/h2\u003e\n  \u003cdiv class=\"hdiy-table-wrap\"\u003e\n    \u003ctable\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eAdhesive-Lined Heat Shrink End Cap (Closed End)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eShrink Ratio\u003c\/th\u003e\n\u003ctd\u003e2:1\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eInner Liner\u003c\/th\u003e\n\u003ctd\u003eHot-melt adhesive (polyamide-based, typically)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eOuter Shell Material\u003c\/th\u003e\n\u003ctd\u003ePolyolefin (flexible, halogen-free typically)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eAvailable Sizes (Dia × Length)\u003c\/th\u003e\n\u003ctd\u003e8×25mm, 10×30mm, 13×30mm, 15×40mm, 18×40mm, 20×40mm, 23×40mm, 25×40mm, 28×40mm, 30×60mm, 35×60mm, 40×60mm, 45×60mm, 50×70mm\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eWire Diameter Range Covered\u003c\/th\u003e\n\u003ctd\u003e5mm (≈3\/16\") to 45mm (≈1-3\/4\") — see variant options for per-size ranges\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003ePack Quantities Available\u003c\/th\u003e\n\u003ctd\u003e1, 2, 5, 10, 20, 30, 50 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eTypical Activation Temperature\u003c\/th\u003e\n\u003ctd\u003eApprox. 70–90°C (158–194°F); full shrink at approx. 120°C (248°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eApplication Tool\u003c\/th\u003e\n\u003ctd\u003eHeat gun (recommended); avoid open flame\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eTypical Use Environments\u003c\/th\u003e\n\u003ctd\u003eAutomotive, marine, outdoor low-voltage, industrial wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eOperating Temperature (typical)\u003c\/th\u003e\n\u003ctd\u003eContact us to confirm for your specific application\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003cth\u003eCertifications \/ Standards\u003c\/th\u003e\n\u003ctd\u003eSee variant options or contact us to confirm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-faq\"\u003e\n    \u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I choose the right end cap size for my wire?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eEach size lists a recommended wire diameter range — for example, the 8×25mm cap fits wire diameters of 5mm–7mm (approximately 3\/16\"–9\/32\"). Match your wire's \u003cstrong\u003eouter diameter including insulation\u003c\/strong\u003e to the \"Fit For Wire Dia\" range shown in the variant name. When in doubt, size down slightly so the adhesive liner seals tightly around the conductor rather than leaving gaps.\u003c\/p\u003e\n        \u003cp\u003eQuick reference examples: 10×30mm fits 6–9mm wire (≈1\/4\"–3\/8\"); 25×40mm fits 16–22mm wire (≈5\/8\"–7\/8\"); 50×70mm fits 35–45mm wire (≈1-3\/8\"–1-3\/4\").\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat is the shrink ratio and what does 2:1 mean?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eA 2:1 shrink ratio means the cap's inner diameter will shrink to approximately half its original (recovered) size when heat is applied. This ensures a snug mechanical grip on the wire end. The adhesive liner melts simultaneously to create a watertight seal. For most wire end sealing applications, 2:1 is the standard ratio and provides reliable coverage across the listed wire diameter ranges.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eAre these end caps waterproof and suitable for outdoor or marine use?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eYes. The hot-melt adhesive inner liner flows into gaps and voids as it melts, creating a moisture-resistant seal around the wire end. These caps are generally suitable for outdoor, marine, and automotive environments where moisture ingress is a concern. For fully submerged or high-pressure applications, confirm suitability with your specific installation requirements before use.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat temperature do I need to shrink these caps, and can I use a heat gun?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003ePolyolefin heat shrink end caps typically activate at around 70–90°C (158–194°F) and fully shrink at approximately 120°C (248°F). A standard heat gun on a low-to-medium setting works well. Apply heat evenly, starting at the closed end and working toward the open end. Avoid open flames, which can scorch the material unevenly and compromise the adhesive seal.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eCan I use these on stranded wire, solid wire, or cable bundles?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eYes. These end caps work on stranded wire, solid wire, and small cable bundles. The adhesive liner conforms to irregular surfaces, making them effective for sealing multi-conductor cables and rope-lay conductors. Just ensure the total outer diameter of the bundle falls within the listed wire diameter range for the chosen size variant.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow do I apply a heat shrink end cap correctly?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003col class=\"hdiy-list\"\u003e\n          \u003cli\u003eSlide the open end of the cap over the wire end so the conductor tip sits near the closed bottom of the cap.\u003c\/li\u003e\n          \u003cli\u003eApply heat evenly from the closed end toward the open end using a heat gun.\u003c\/li\u003e\n          \u003cli\u003eThe cap will shrink inward and the adhesive will flow to seal around the wire.\u003c\/li\u003e\n          \u003cli\u003eAllow to cool for 30–60 seconds before handling or pulling on the wire.\u003c\/li\u003e\n        \u003c\/ol\u003e\n        \u003cp\u003eFor best results, strip back any excess insulation so the bare conductor does not extend past the cap's closed end.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat is the difference between a heat shrink end cap and regular heat shrink tubing?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eRegular heat shrink tubing is open at both ends and is used to insulate or bundle wires along their length. A heat shrink end cap is \u003cstrong\u003eclosed at one end\u003c\/strong\u003e, designed specifically to seal and protect the cut or stripped tip of a wire or cable — preventing moisture, corrosion, and short circuits at the termination point. End caps are the correct choice when you need to permanently cap off a wire end rather than sleeve a connection.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n    \u003cdetails\u003e\n      \u003csummary\u003eHow much load or pull force can these end caps handle after shrinking?\u003c\/summary\u003e\n      \u003cdiv class=\"hdiy-faq-body\"\u003e\n        \u003cp\u003eThe adhesive liner creates a mechanical bond between the cap and the wire insulation, generally providing good resistance to axial pull-out forces in typical wiring applications. Exact pull-out strength varies by wire diameter, surface texture, and heat application quality. For high-vibration or high-tension installations, we recommend securing the wire with an additional cable tie or clamp near the cap. Contact us to confirm specifications for critical load-bearing applications.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/details\u003e\n\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"hdiy-cta\"\u003e\n    🛒 Select your \u003cstrong\u003epack quantity and diameter × length\u003c\/strong\u003e above, then add to cart — ships from our US warehouse.\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"HomeDIYer","offers":[{"title":"2 Pcs \/ 8*25mm(Fit For Wire Dia 5mm-7mm)","offer_id":52329666806034,"sku":"qq02300x2","price":2.11,"currency_code":"USD","in_stock":true},{"title":"5 Pcs \/ 8*25mm(Fit For Wire Dia 5mm-7mm)","offer_id":52329666838802,"sku":"qq02300x5","price":2.57,"currency_code":"USD","in_stock":true},{"title":"10 Pcs \/ 8*25mm(Fit For Wire Dia 5mm-7mm)","offer_id":52329666871570,"sku":"qq02300x10","price":3.33,"currency_code":"USD","in_stock":true},{"title":"20 Pcs \/ 8*25mm(Fit For Wire Dia 5mm-7mm)","offer_id":52329666904338,"sku":"qq02300x20","price":4.96,"currency_code":"USD","in_stock":true},{"title":"50 Pcs \/ 8*25mm(Fit For Wire Dia 5mm-7mm)","offer_id":52329666937106,"sku":"qq02300x50","price":9.86,"currency_code":"USD","in_stock":true},{"title":"2 Pcs \/ 10*30mm(Fit For Wire Dia 6mm-9mm)","offer_id":52329666969874,"sku":"qq02301x2","price":2.11,"currency_code":"USD","in_stock":true},{"title":"5 Pcs \/ 10*30mm(Fit For Wire Dia 6mm-9mm)","offer_id":52329667002642,"sku":"qq02301x5","price":2.57,"currency_code":"USD","in_stock":true},{"title":"10 Pcs \/ 10*30mm(Fit For Wire Dia 6mm-9mm)","offer_id":52329667035410,"sku":"qq02301x10","price":3.47,"currency_code":"USD","in_stock":true},{"title":"20 Pcs \/ 10*30mm(Fit For Wire Dia 6mm-9mm)","offer_id":52329667068178,"sku":"qq02301x20","price":5.1,"currency_code":"USD","in_stock":true},{"title":"50 Pcs \/ 10*30mm(Fit For Wire Dia 6mm-9mm)","offer_id":52329667100946,"sku":"qq02301x50","price":10.59,"currency_code":"USD","in_stock":true},{"title":"2 Pcs \/ 13*30mm(Fit For Wire Dia 7mm-11mm)","offer_id":52329667133714,"sku":"qq02302x2","price":2.24,"currency_code":"USD","in_stock":true},{"title":"5 Pcs \/ 13*30mm(Fit For Wire Dia 7mm-11mm)","offer_id":52329667166482,"sku":"qq02302x5","price":2.92,"currency_code":"USD","in_stock":true},{"title":"10 Pcs \/ 13*30mm(Fit For Wire Dia 7mm-11mm)","offer_id":52329667199250,"sku":"qq02302x10","price":4.07,"currency_code":"USD","in_stock":true},{"title":"20 Pcs \/ 13*30mm(Fit For Wire Dia 7mm-11mm)","offer_id":52329667232018,"sku":"qq02302x20","price":6.38,"currency_code":"USD","in_stock":true},{"title":"50 Pcs \/ 13*30mm(Fit For Wire Dia 7mm-11mm)","offer_id":52329667264786,"sku":"qq02302x50","price":14.67,"currency_code":"USD","in_stock":true},{"title":"2 Pcs \/ 15*40mm(Fit For Wire Dia 8mm-13mm)","offer_id":52329667297554,"sku":"qq02303x2","price":2.16,"currency_code":"USD","in_stock":true},{"title":"5 Pcs \/ 15*40mm(Fit For Wire Dia 8mm-13mm)","offer_id":52329667330322,"sku":"qq02303x5","price":2.79,"currency_code":"USD","in_stock":true},{"title":"10 Pcs \/ 15*40mm(Fit For Wire Dia 8mm-13mm)","offer_id":52329667363090,"sku":"qq02303x10","price":3.79,"currency_code":"USD","in_stock":true},{"title":"20 Pcs \/ 15*40mm(Fit For Wire Dia 8mm-13mm)","offer_id":52329667395858,"sku":"qq02303x20","price":6.24,"currency_code":"USD","in_stock":true},{"title":"50 Pcs \/ 15*40mm(Fit For Wire Dia 8mm-13mm)","offer_id":52329667428626,"sku":"qq02303x50","price":14.27,"currency_code":"USD","in_stock":true},{"title":"2 Pcs \/ 18*40mm(Fit For Wire Dia 11mm-15mm)","offer_id":52329667461394,"sku":"qq02304x2","price":2.24,"currency_code":"USD","in_stock":true},{"title":"5 Pcs \/ 18*40mm(Fit For Wire Dia 11mm-15mm)","offer_id":52329667494162,"sku":"qq02304x5","price":2.98,"currency_code":"USD","in_stock":true},{"title":"10 Pcs \/ 18*40mm(Fit For Wire Dia 11mm-15mm)","offer_id":52329667526930,"sku":"qq02304x10","price":4.2,"currency_code":"USD","in_stock":true},{"title":"20 Pcs \/ 18*40mm(Fit For Wire Dia 11mm-15mm)","offer_id":52329667559698,"sku":"qq02304x20","price":7.19,"currency_code":"USD","in_stock":true},{"title":"50 Pcs \/ 18*40mm(Fit For Wire Dia 11mm-15mm)","offer_id":52329667592466,"sku":"qq02304x50","price":16.58,"currency_code":"USD","in_stock":true},{"title":"2 Pcs \/ 20*40mm(Fit For Wire Dia 12mm-17mm)","offer_id":52329667625234,"sku":"qq02305x2","price":2.3,"currency_code":"USD","in_stock":true},{"title":"5 Pcs \/ 20*40mm(Fit For Wire Dia 12mm-17mm)","offer_id":52329667658002,"sku":"qq02305x5","price":3.11,"currency_code":"USD","in_stock":true},{"title":"10 Pcs \/ 20*40mm(Fit For Wire Dia 12mm-17mm)","offer_id":52329667690770,"sku":"qq02305x10","price":4.61,"currency_code":"USD","in_stock":true},{"title":"20 Pcs \/ 20*40mm(Fit For Wire Dia 12mm-17mm)","offer_id":52329667723538,"sku":"qq02305x20","price":8.42,"currency_code":"USD","in_stock":true},{"title":"50 Pcs \/ 20*40mm(Fit For Wire Dia 12mm-17mm)","offer_id":52329667756306,"sku":"qq02305x50","price":19.65,"currency_code":"USD","in_stock":true},{"title":"2 Pcs \/ 23*40mm(Fit For Wire Dia 15mm-17mm)","offer_id":52329667789074,"sku":"qq02306x2","price":2.43,"currency_code":"USD","in_stock":true},{"title":"5 Pcs \/ 23*40mm(Fit For Wire Dia 15mm-17mm)","offer_id":52329667821842,"sku":"qq02306x5","price":3.33,"currency_code":"USD","in_stock":true},{"title":"10 Pcs \/ 23*40mm(Fit For Wire Dia 15mm-17mm)","offer_id":52329667854610,"sku":"qq02306x10","price":5.43,"currency_code":"USD","in_stock":true},{"title":"20 Pcs \/ 23*40mm(Fit For Wire Dia 15mm-17mm)","offer_id":52329667887378,"sku":"qq02306x20","price":10.0,"currency_code":"USD","in_stock":true},{"title":"50 Pcs \/ 23*40mm(Fit For Wire Dia 15mm-17mm)","offer_id":52329667920146,"sku":"qq02306x50","price":23.6,"currency_code":"USD","in_stock":true},{"title":"2 Pcs \/ 25*40mm(Fit For Wire Dia 16mm-22mm)","offer_id":52329667952914,"sku":"qq02307x2","price":2.52,"currency_code":"USD","in_stock":true},{"title":"5 Pcs \/ 25*40mm(Fit For Wire Dia 16mm-22mm)","offer_id":52329667985682,"sku":"qq02307x5","price":3.66,"currency_code":"USD","in_stock":true},{"title":"10 Pcs \/ 25*40mm(Fit For Wire Dia 16mm-22mm)","offer_id":52329668018450,"sku":"qq02307x10","price":6.05,"currency_code":"USD","in_stock":true},{"title":"20 Pcs \/ 25*40mm(Fit For Wire Dia 16mm-22mm)","offer_id":52329668051218,"sku":"qq02307x20","price":11.14,"currency_code":"USD","in_stock":true},{"title":"50 Pcs \/ 25*40mm(Fit For Wire Dia 16mm-22mm)","offer_id":52329668083986,"sku":"qq02307x50","price":26.59,"currency_code":"USD","in_stock":true},{"title":"2 Pcs \/ 28*40mm(Fit For Wire Dia 17mm-25mm)","offer_id":52329668116754,"sku":"qq02308x2","price":2.71,"currency_code":"USD","in_stock":true},{"title":"5 Pcs \/ 28*40mm(Fit For Wire Dia 17mm-25mm)","offer_id":52329668149522,"sku":"qq02308x5","price":4.07,"currency_code":"USD","in_stock":true},{"title":"10 Pcs \/ 28*40mm(Fit For Wire Dia 17mm-25mm)","offer_id":52329668182290,"sku":"qq02308x10","price":7.33,"currency_code":"USD","in_stock":true},{"title":"20 Pcs \/ 28*40mm(Fit For Wire Dia 17mm-25mm)","offer_id":52329668215058,"sku":"qq02308x20","price":13.67,"currency_code":"USD","in_stock":true},{"title":"30 Pcs \/ 28*40mm(Fit For Wire Dia 17mm-25mm)","offer_id":52329668247826,"sku":"qq02308x30","price":20.06,"currency_code":"USD","in_stock":true},{"title":"2 Pcs \/ 30*60mm(Fit For Wire Dia 18mm-27mm)","offer_id":52329668280594,"sku":"qq02309x2","price":2.71,"currency_code":"USD","in_stock":true},{"title":"5 Pcs \/ 30*60mm(Fit For Wire Dia 18mm-27mm)","offer_id":52329668313362,"sku":"qq02309x5","price":4.69,"currency_code":"USD","in_stock":true},{"title":"10 Pcs \/ 30*60mm(Fit For Wire Dia 18mm-27mm)","offer_id":52329668346130,"sku":"qq02309x10","price":8.5,"currency_code":"USD","in_stock":true},{"title":"20 Pcs \/ 30*60mm(Fit For Wire Dia 18mm-27mm)","offer_id":52329668378898,"sku":"qq02309x20","price":16.03,"currency_code":"USD","in_stock":true},{"title":"30 Pcs \/ 30*60mm(Fit For Wire Dia 18mm-27mm)","offer_id":52329668411666,"sku":"qq02309x30","price":23.6,"currency_code":"USD","in_stock":true},{"title":"1 Pcs \/ 35*60mm(Fit For Wire Dia 22mm-30mm)","offer_id":52329668444434,"sku":"qq02310x1","price":2.3,"currency_code":"USD","in_stock":true},{"title":"2 Pcs \/ 35*60mm(Fit For Wire Dia 22mm-30mm)","offer_id":52329668477202,"sku":"qq02310x2","price":2.79,"currency_code":"USD","in_stock":true},{"title":"5 Pcs \/ 35*60mm(Fit For Wire Dia 22mm-30mm)","offer_id":52329668509970,"sku":"qq02310x5","price":5.02,"currency_code":"USD","in_stock":true},{"title":"10 Pcs \/ 35*60mm(Fit For Wire Dia 22mm-30mm)","offer_id":52329668542738,"sku":"qq02310x10","price":9.04,"currency_code":"USD","in_stock":true},{"title":"20 Pcs \/ 35*60mm(Fit For Wire Dia 22mm-30mm)","offer_id":52329668575506,"sku":"qq02310x20","price":17.2,"currency_code":"USD","in_stock":true},{"title":"1 Pcs \/ 40*60mm(Fit For Wire Dia 25mm-35mm)","offer_id":52329668608274,"sku":"qq02311x1","price":2.3,"currency_code":"USD","in_stock":true},{"title":"2 Pcs \/ 40*60mm(Fit For Wire Dia 25mm-35mm)","offer_id":52329668641042,"sku":"qq02311x2","price":2.84,"currency_code":"USD","in_stock":true},{"title":"5 Pcs \/ 40*60mm(Fit For Wire Dia 25mm-35mm)","offer_id":52329668673810,"sku":"qq02311x5","price":5.43,"currency_code":"USD","in_stock":true},{"title":"10 Pcs \/ 40*60mm(Fit For Wire Dia 25mm-35mm)","offer_id":52329668706578,"sku":"qq02311x10","price":9.91,"currency_code":"USD","in_stock":true},{"title":"20 Pcs \/ 40*60mm(Fit For Wire Dia 25mm-35mm)","offer_id":52329668739346,"sku":"qq02311x20","price":18.97,"currency_code":"USD","in_stock":true},{"title":"1 Pcs \/ 45*60mm(Fit For Wire Dia 28mm-40mm)","offer_id":52329668772114,"sku":"qq02312x1","price":2.43,"currency_code":"USD","in_stock":true},{"title":"2 Pcs \/ 45*60mm(Fit For Wire Dia 28mm-40mm)","offer_id":52329668804882,"sku":"qq02312x2","price":3.06,"currency_code":"USD","in_stock":true},{"title":"5 Pcs \/ 45*60mm(Fit For Wire Dia 28mm-40mm)","offer_id":52329668837650,"sku":"qq02312x5","price":5.97,"currency_code":"USD","in_stock":true},{"title":"10 Pcs \/ 45*60mm(Fit For Wire Dia 28mm-40mm)","offer_id":52329668870418,"sku":"qq02312x10","price":11.08,"currency_code":"USD","in_stock":true},{"title":"20 Pcs \/ 45*60mm(Fit For Wire Dia 28mm-40mm)","offer_id":52329668903186,"sku":"qq02312x20","price":21.28,"currency_code":"USD","in_stock":true},{"title":"1 Pcs \/ 50*70mm(Fit For Wire Dia 35mm-45mm)","offer_id":52329668935954,"sku":"qq02313x1","price":2.57,"currency_code":"USD","in_stock":true},{"title":"2 Pcs \/ 50*70mm(Fit For Wire Dia 35mm-45mm)","offer_id":52329668968722,"sku":"qq02313x2","price":4.34,"currency_code":"USD","in_stock":true},{"title":"5 Pcs \/ 50*70mm(Fit For Wire Dia 35mm-45mm)","offer_id":52329669001490,"sku":"qq02313x5","price":9.37,"currency_code":"USD","in_stock":true},{"title":"10 Pcs \/ 50*70mm(Fit For Wire Dia 35mm-45mm)","offer_id":52329669034258,"sku":"qq02313x10","price":17.88,"currency_code":"USD","in_stock":true},{"title":"20 Pcs \/ 50*70mm(Fit For Wire Dia 35mm-45mm)","offer_id":52329669067026,"sku":"qq02313x20","price":34.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0884\/8936\/1682\/files\/Picture1of3_16f36188-6bbf-4fc5-a0bd-9e602878a8e4.jpg?v=1780555293","url":"https:\/\/homediyer.com\/products\/red-adhesive-lined-heat-shrink-end-caps-2-1-wire-sealing","provider":"HomeDIYer","version":"1.0","type":"link"}