M3–M5 Black Hex Socket Countersunk Screws – A2 Stainless Steel, Electrophoresis Black, Fully Threaded (5–30mm Overall Length) $0.00 USD

M3–M5 Black Hex Socket Countersunk Screws – A2 Stainless Steel, Electrophoresis Black, Fully Threaded (5–30mm Overall Length)

Name: M3–M5 Black Hex Socket Countersunk Screws – A2 Stainless Steel, Electrophoresis Black, Fully Threaded (5–30mm Overall Length)
Brand: HomeDIYer
SKU: PENGGB03520x10
Availability: InStock

$0.00 USD

Auf Lager

By HomeDIYer^®

Quantity Discount Promotion

Thread Diameter:

Length（mm）:

Qty:

Variante

Menge:

Abholung von Illinois momentan nicht möglich

Illinois

Abholung momentan nicht möglich

150 Hastings Drive
Buffalo Grove IL 60089
Vereinigte Staaten

+18479091828

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

⚫ M3–M5 Black Hex Socket Countersunk Screws – A2 Stainless Steel, Electrophoresis Black, Fully Threaded (5–30mm Overall Length)

You’re building a custom PC, mounting black anodized aluminum panels, or working on a project where dark hardware is a must – and you want screws that disappear into the surface. These M3, M4, and M5 hex socket countersunk screws are made from A2 stainless steel with an electrophoresis black finish. The flat 90° head sinks flush into a pre‑drilled countersink, leaving a smooth, almost invisible finish. The hex socket (Allen) drive lets you apply torque without slipping. Available in lengths from 5mm to 30mm measured overall (including the head). Fully threaded. The black coating is durable and adds extra corrosion resistance. Perfect for marine equipment, outdoor electronics, automotive trim, and any project where a low‑profile, rust‑proof dark screw is needed.

✨ Key Features – Black Hex Socket Countersunk Screws (A2 Stainless)

🔽 Countersunk flat head (90°) – Sits flush with the surface after proper countersinking. No protruding heads – clean and professional.
⚫ Electrophoresis black finish – Durable, uniform black coating. Provides extra corrosion resistance and a sleek, low‑glare appearance.
🔧 Hex socket (Allen) drive – Allows high torque without cam‑out. Clean recess – won’t collect dirt or debris.
🛡️ A2 stainless steel (304) – Excellent corrosion and oxidation resistance. Even if the black coating scratches, the stainless underneath won’t rust.
📏 Metric sizes M3, M4, M5 – Perfect for small to medium fastening in electronics, machinery, and marine hardware.
📐 Overall length includes head (5–30mm) – Example: M4 x 10mm means total length from top of head to tip is 10mm. Fully threaded.
⚙️ ISO 10642 / DIN 7991 standard – Precision dimensions, consistent quality. Fully threaded coarse pitch.

📏 Specifications – M3 M4 M5 Black Countersunk Hex Screws (Overall Length)

Thread Diameter (M)	Thread Pitch (mm)	Overall Length (mm, including head) *	Head Style	Drive	Hex Key Size (mm)	Material / Finish
📐 Overall length = from top of head to tip. Fully threaded. Select exact size from dropdown.
M3	0.5	5, 6, 8, 10, 12, 16, 20, 25, 30	Countersunk / Flat (90°)	Hex socket (Allen)	2 mm	A2 304 Stainless / Electrophoresis black
M4	0.7	5, 6, 8, 10, 12, 16, 20, 25, 30			2.5 mm
M5	0.8	5, 6, 8, 10, 12, 16, 20, 25, 30			3 mm

* Lengths are typical – exact availability may vary. Please allow minor manual measurement errors. Black color may vary slightly due to monitor calibration.

📋 Technical Details – Standard & Material

Property	Details
Standard	GB/T 70.3 / ISO 10642 / DIN 7991 – metric countersunk hex socket head screws
Material	A2 stainless steel (304) – excellent corrosion resistance, high strength, non‑magnetic (slightly after cold working)
Finish	Electrophoresis black – uniform matte black coating, good adhesion, salt spray resistance
Thread	Coarse metric, fully threaded, burr‑free

❓ Frequently Asked Questions – Black Hex Countersunk Screws

1. How do I measure the length of these countersunk screws?

For countersunk flat head screws (DIN 7991), the length is measured overall – from the top of the head to the tip. So an “M4 x 10mm” screw has a total length of 10mm including the head. This matches our listing.

2. Do I need to countersink the hole for these screws to sit flush?

Yes – these are true 90° countersunk screws. To achieve a flush or slightly recessed finish, you must drill a matching 90° countersink hole. Use a countersink bit slightly larger than the head diameter.

3. Are these screws fully threaded?

Yes – all M3, M4, and M5 screws in this range (up to 30mm overall length) are fully threaded from under the head to the tip, giving you maximum grip in blind holes or through‑nut applications.

4. Will the black coating scratch or wear off? What about rust?

Electrophoresis black is a durable coating that bonds to the steel. It resists scratches better than paint, but heavy torque or contact with sharp metal may leave marks. The good news: the base material is A2 stainless steel. Even if the coating wears, the screw itself will not rust – a major advantage over black‑coated carbon steel screws.

5. What hex key size do I need for M3, M4, and M5?

M3 uses a 2mm Allen key, M4 uses 2.5mm, M5 uses 3mm. Always use a quality hex key that fits snugly to avoid rounding the socket.

6. Can I use these screws with a nut? What size nut fits?

Yes – these are machine screws. Use standard metric nuts of the same thread size (M3, M4, or M5). We recommend matching black or stainless nuts. They will also thread into pre‑tapped holes. Not self‑tapping – for wood or plastic, use a threaded insert or a nut on the back.