🟡 Product Overview: Brass Phillips Pan Head Screws with Washer & Hex Nut – M3 M4 M5
No more hunting for separate washers and nuts – this set gives you everything in one bag. Each M3, M4, or M5 brass Phillips pan head machine screw comes with a matching brass hex nut and flat washer. Perfect for furniture restoration, marine hardware, electrical projects, and decorative trim where steel would rust or look out of place. The warm golden finish of solid brass adds a classic touch, while the Phillips pan head sits flush on surfaces for a clean, professional look. Fully threaded with standard coarse metric pitch, these Grade 5 bolts offer good strength, excellent corrosion resistance, and non‑magnetic properties. Whether you're building a boat, repairing an antique, or assembling a custom lighting fixture, this brass fastener set has you covered.
✨ Why Choose This Brass Screw, Nut & Washer Set
-
Complete 3‑piece set – screw + hex nut + flat washer – No separate purchases. Each screw comes with a matching brass nut and washer. Saves time and ensures thread compatibility.
-
Solid brass construction – Naturally corrosion‑resistant, non‑magnetic, and non‑sparking. High strength, high toughness, and excellent cold/hot working performance.
-
Phillips pan head design – Rounded top with a flat bearing surface. Distributes clamping force evenly and gives a clean, decorative finish.
-
Metric sizes M3, M4, M5 – Versatile diameters for furniture, marine equipment, electronics, lighting, and general DIY.
-
Fully threaded, coarse metric pitch – M3x0.5, M4x0.7, M5x0.8. Threads run the entire shank length for maximum grip in thin materials.
-
GB standard, Grade 5 strength – Reliable for most indoor and light outdoor fastening applications.
-
Safe and environmentally friendly – Brass is recyclable and non‑toxic, making it a responsible choice for home and workshop.
📏 Technical Specifications – Brass Pan Head Screw + Nut + Washer Set (M3–M5)
| Specification |
Details |
| Product Type |
Phillips Pan Head Machine Screw + Hex Nut + Flat Washer (3‑piece set) |
| Material |
Solid brass |
| Drive Style |
Phillips cross‑head |
| Head Style |
Pan head (round, low profile) |
| System of Measurement |
Metric |
| Screw Sizes (Diameter) |
M3, M4, M5 |
| Thread Pitch (coarse) |
M3x0.5, M4x0.7, M5x0.8 |
| Thread Type |
Fully threaded |
| Length Measurement |
Under head (screw length excludes pan head) – select from options |
| Included Components |
1 screw + 1 hex nut + 1 flat washer per set (quantity based on selection) |
| Finish |
Natural brass (unplated) |
| Grade |
Grade 5 |
| Standard |
GB |
❓ FAQs – Brass Screw, Nut & Washer Set (M3–M5)
🔸 What’s included in each set? Do I get nuts and washers with every screw?
Yes – each screw comes with one matching brass hex nut and one flat washer. For example, if you order 20 M4 screws, you’ll receive 20 screws + 20 nuts + 20 washers. Everything is matched by thread size and ready to use.
🔸 Will brass screws rust or tarnish over time?
Brass does not rust like steel. It may develop a darker patina or slight greenish tint (verdigris) over years in damp or salty environments. This is a surface change that does not weaken the screw. For indoor use, they'll stay golden for a long time. For outdoor use, they outperform plain steel but aren't as corrosion‑resistant as stainless – ideal for decorative or low‑moisture exterior work.
🔸 How is screw length measured? Are these fully threaded?
Yes – all screws are fully threaded from just under the head to the tip. Length is measured from the underside of the head (the flat bearing surface) to the tip, not including the pan head. For example, an M4 x 16mm screw has a 16mm threaded shank.
🔸 What Phillips screwdriver size works for M3, M4, and M5?
M3: use PH1. M4: use PH1 or PH2. M5: use PH2. Using the correct size prevents stripping – brass is softer than steel, so don't overtighten.
🔸 Are these screws magnetic? Will they interfere with electronics?
Brass is completely non‑magnetic. That makes them perfect for sensitive electronic equipment, compass housings, or any application where stray magnetism is a problem.
🔸 Can I use these screws outdoors or in marine environments?
Yes – brass has good corrosion resistance for outdoor use, including marine applications. It outperforms steel in salt air but is not as resistant as 316 stainless for continuous underwater immersion. For deck hardware, railings, and above‑water marine use, brass is a classic and reliable choice.
