16mm Metal Toggle Switch – 15A 2-Position ON/OFF with LED Indicator, IP65 Waterproof

This switch is designed for a 16mm (5/8") mounting hole. Use a step drill bit or chassis punch to cut a clean hole in your panel before installation. The threaded collar and nut secure the switch firmly from the rear.

The switch is rated at 15A. Voltage options are 3–6V and 12–24V DC. Always select the voltage range that matches your circuit to ensure the LED indicator lights correctly. Running a 3–6V LED variant on a 12V circuit will typically burn out the indicator.

Yes. The switch carries an IP65 rating, meaning it is dust-tight and protected against low-pressure water jets from any direction. It is generally suitable for outdoor enclosures, marine dashboards, and engine bays. Prolonged submersion is not recommended — for fully submerged applications, an IP67 or IP68 rated switch would typically be required.

All three share the same 15A / IP65 electrical specification. The Metal version has a standard chrome-finish actuator. The Oxidized Black version features a matte black finish for a stealthy or industrial aesthetic. The Stainless Steel version offers enhanced corrosion resistance, making it a strong choice for marine or high-humidity environments where chrome may eventually pit or tarnish.

If you have your own wiring and connectors, the Metal Toggle Switch (switch-only) variant is sufficient — just connect your wires directly to the terminals. The + Wire variants include pre-attached lead wires, which simplify installation in tight spaces or when you want a faster, plug-and-play connection without soldering or crimping onto bare terminals.

Choose No Light if you only need a mechanical switch with no indicator. Red is commonly used for power or warning indicators. Green typically signals a safe or active state. Blue is popular for accent lighting in automotive and marine builds. The Red and Green dual-color variant is useful for status indication — for example, green when a circuit is active and red when it is off — in custom control panels.

This is a 2-position toggle switch. It generally uses screw terminals or solder lugs on the rear. Connect your load wire to the output terminal and your power source to the input terminal. For LED-equipped versions, the indicator circuit is typically powered from the same supply line. The + Wire variants include color-coded lead wires to simplify identification. If you need a wiring diagram for your specific variant, contact us to confirm the terminal layout.

This switch is designed and rated for DC circuits (3–6V or 12–24V). It is not recommended for AC mains wiring. For AC applications, you would typically need a switch rated and certified for AC voltage (e.g., UL-listed for 120V or 240V AC). Using a DC-rated switch on AC mains is a safety hazard and not supported.