19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths
19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths
19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths
19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths
19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths
19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths
19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths
19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths
19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths
19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths
19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths
19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths
19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths
Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild
19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths

19.1mm Dual Wall Heat Shrink Tubing 3:1 Ratio Adhesive Lined Waterproof — Multiple Colors & Lengths

HomeDIYer
Keine Bewertungen

By HomeDIYer®

Preis:
$3.93 USD
Lagerbestand:
Verfügbar (500 Stück), versandbereit

Payment & Security

Ach Direct Debit Amazon American Express Apple Pay Bancontact Diners Club Discover Google Pay iDEAL Wero Mastercard PayPal Shop Pay USDC Visa

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

Quantity Discount Promotion
🎯 BULK DISCOUNT: Buy More, Save More!
Buy 2 Items
5% OFF
Buy 4 Items
10% OFF
Buy 6 Items
15% OFF
✅ Auto-discount • 🔄 Mix & match
Expert

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM
WhatsApp WhatsApp Email
⚡
24-Hour Fast Ship
🚚
Arrives in 3-14 days
🌍
Global Reach
↩️
30-Day Returns
🌱 1 tree planted with every purchase

Beschreibung

19.1mm Dual Wall Heat Shrink Tubing — Waterproof Adhesive-Lined Protection for Cables & Connectors

Exposed wire splices, corroded battery terminals, and unprotected marine connections are a constant headache for electricians, auto technicians, and serious DIYers. One failed seal can mean a shorted circuit, a flooded connector, or a costly repair down the line. This 19.1mm dual wall heat shrink tubing with a 3:1 shrink ratio is built to eliminate that risk — delivering a tight, adhesive-bonded, waterproof sleeve that holds up in the harshest conditions.

Each piece is a dual wall tube: an outer polyolefin shell that shrinks to roughly one-third of its original diameter, and an inner thermoplastic adhesive layer that melts and flows to seal around cables, connectors, and terminals. The supplied inner diameter is 19.1mm (≈3/4"), recovering to approximately 6.4mm (≈1/4") after full shrink. Available in lengths of 1m (≈3.3 ft), 2m (≈6.6 ft), 5m (≈16.4 ft), and 10m (≈32.8 ft), and in seven colors — Black, White, Red, Green, Yellow, Blue, and Transparent — so you can match your project or color-code your wiring runs.

Typical applications include waterproof wire splices for marine wiring harnesses, protective sleeves for automotive battery cable terminals, strain relief on outdoor landscape lighting connections, and sealed entry points for underground conduit runs. The adhesive-lined construction makes it a go-to choice for anyone searching for waterproof heat shrink tubing for marine use or adhesive-lined heat shrink for automotive wiring.

🔌 Compatibility: Fits cables, wires, and connectors with an outer diameter up to approximately 19.1mm (3/4"). Verify your cable OD before ordering — the tubing must slide over the connector before shrinking. Suitable for copper, aluminum, and tinned conductors.

✅ Key Features of These 19.1mm Dual Wall Adhesive-Lined Heat Shrink Tubes

  • 💧Waterproof Adhesive Inner Layer — The thermoplastic adhesive melts during shrinking and flows into gaps, creating a moisture-resistant seal ideal for waterproof wire splice applications in marine and outdoor environments.
  • 📐3:1 Shrink Ratio — A higher shrink ratio than standard single-wall tubing means this sleeve accommodates a wider range of connector sizes and provides a tighter, more secure fit around irregular shapes like ring terminals and battery lugs.
  • 🎨7 Color Options — Black, White, Red, Green, Yellow, Blue, and Transparent allow for circuit identification and color-coded wiring harness organization in automotive, marine, and industrial installations.
  • 📏Flexible Length Selection — Choose from 1m, 2m, 5m, or 10m to match your project scope, whether it's a single connector repair or a full wiring harness build — no waste, no shortage.
  • 🔥Dual Wall Polyolefin Construction — The outer shell is made from cross-linked polyolefin, which resists abrasion, chemicals, and moderate heat after shrinking — a practical choice for adhesive-lined heat shrink for automotive wiring under the hood.
  • ⚡Strain Relief & Vibration Resistance — Once shrunk and bonded, the tubing adds mechanical support to cable exits and splice points, reducing flex fatigue and connector pull-out in high-vibration environments like engine bays and boat hulls.

📐 Technical Specifications — Dual Wall Adhesive-Lined Heat Shrink Tubing

Inner Diameter (Before Shrink) 19.1mm (≈3/4")
Recovered Inner Diameter (After Shrink) Approximately 6.4mm (≈1/4") — varies by substrate
Shrink Ratio 3:1
Wall Type Dual Wall (Polyolefin outer + Thermoplastic Adhesive inner)
Available Lengths 1m (≈3.3 ft), 2m (≈6.6 ft), 5m (≈16.4 ft), 10m (≈32.8 ft)
Available Colors Black, White, Red, Green, Yellow, Blue, Transparent
Shrink Temperature See variant options — apply heat gun at approximately 90–120°C (194–248°F)
Operating Temperature Range Contact us to confirm exact rated range for your application
Waterproof / Moisture Seal Yes — adhesive inner layer flows and seals on shrink
UV Resistance Generally suitable for outdoor use; black variant offers best UV resistance
Flame Retardancy Contact us to confirm
Compliance / Standards Contact us to confirm
⚠️ Sizing Note: 19.1mm is the pre-shrink inner diameter. Your cable or connector must fit inside this diameter before heat is applied. If your cable OD is close to 19.1mm, consider the next size up for easier installation.

❓ Frequently Asked Questions

What does 19.1mm refer to — the before or after shrink diameter?

19.1mm (approximately 3/4") is the supplied inner diameter before shrinking. With a 3:1 shrink ratio, the tubing will typically recover down to approximately 6.4mm (about 1/4"). Always measure your cable or connector at its widest point before selecting a size.

How do I choose the right length for my project?

Measure the total run of cable or splice you need to cover, then add at least 10–20% extra for overlap and trimming. For single repairs, 1m (≈3.3 ft) is generally sufficient. For wiring harnesses or larger installations, 5m (≈16.4 ft) or 10m (≈32.8 ft) rolls offer better value per meter.

How strong is the adhesive lining — will it hold under vibration?

The inner adhesive layer melts and flows during heat application, bonding to the substrate and creating a mechanical seal. This dual wall construction is generally rated to withstand continuous vibration in automotive and marine environments, though specific pull-out strength depends on the substrate material and surface preparation.

Is this tubing safe for outdoor and marine use?

Yes. The adhesive-lined dual wall design creates a waterproof seal that resists moisture ingress, making it suitable for outdoor wiring, marine cable splices, and underground conduit entry points. For prolonged UV exposure, the black variant typically offers the best resistance.

What heat source should I use to shrink this tubing?

A heat gun set to approximately 90–120°C (194–248°F) is the recommended tool. Apply heat evenly by moving the gun along the tubing rather than holding it in one spot. In most cases, a standard open-flame lighter can work for small sections, but a heat gun gives more consistent results and reduces the risk of scorching.

Which color should I choose for electrical wiring?

Color choice is generally a matter of identification and preference. Black is the most common for general electrical use and offers good UV resistance. Transparent allows you to see the underlying wire or connector. Red, Blue, Green, Yellow, and White are useful for color-coding circuits in automotive, marine, or industrial wiring harnesses.

Can I use this tubing on battery terminals and marine connectors?

Yes. The 19.1mm inner diameter is well-suited for covering battery lugs, ring terminals, and marine-grade connectors. The adhesive lining seals around irregular shapes, helping prevent corrosion at connection points — a common issue in saltwater environments.

🛒 Select your color and length above, then add to cart — ships from our US warehouse.

You may also like

Recently viewed