2:1 Heat Shrink Tubing – Weatherproof Wire Sleeve

2:1 Heat Shrink Tubing – Weatherproof Wire Insulation Sleeve, Multiple Colors & Sizes

Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

2:1 Heat Shrink Tubing — Reliable Weatherproof Wire Insulation for Every Project

Loose wire connections, exposed solder joints, and unprotected terminals are a constant headache for electricians, automotive technicians, and DIY enthusiasts alike. Whether you're rewiring a vehicle harness, sealing marine connections, or tidying up a home electrical project, unprotected wires invite corrosion, shorts, and failures. This 2:1 heat shrink tubing gives you a clean, durable, weatherproof seal that holds up in demanding environments.

Each roll contains continuous-length tubing available in sizes from 0.6mm to 3mm (expanded inner diameter), in lengths of 1m (≈3.3ft), 5m (≈16.4ft), 10m (≈32.8ft), 20m (≈65.6ft), or 50m (≈164ft). The tubing is made from polyolefin — a flexible, flame-retardant material that shrinks to approximately half its original diameter when heat is applied. Seven color options (White, Red, Green, Blue, Transparent, Yellow, Black) are available across all sizes.

Typical use cases include automotive wire repair and harness protection, marine and outdoor electrical connections, color-coded circuit identification in control panels, and insulating solder joints and crimp terminals in DIY electronics projects.

🔌 Compatibility: Works with copper, aluminum, and tinned wire; compatible with standard crimp terminals, solder joints, and connectors. Verify expanded inner diameter against your wire's outer diameter before ordering.

✅ Key Features of These 2:1 Heat Shrink Tubes

🔥2:1 Shrink Ratio — Shrinks to approximately half its expanded diameter, creating a snug, form-fitting seal around wires, terminals, and connectors for reliable heat shrink wire insulation.
🌧️Weatherproof Protection — Polyolefin construction resists moisture, dust, and mild chemicals, making it suitable for automotive, marine, and outdoor weatherproof wire sleeving applications.
🎨7 Color Options — White, Red, Green, Blue, Transparent, Yellow, and Black allow color-coded wire identification across all size variants, simplifying circuit tracing and maintenance.
📏Wide Size Range — Available in 0.6mm, 0.8mm, 1mm, 1.5mm, 2mm, 2.5mm, and 3mm expanded inner diameters to cover a broad range of wire gauges and connector sizes.
✂️Cut-to-Length Rolls — Sold in 1m to 50m continuous rolls that can be cut to any length with scissors, reducing waste and making this tubing practical for both small repairs and large wiring jobs.
🔒Flame-Retardant Material — Made from polyolefin with flame-retardant properties, this cable tube sleeving helps contain heat and reduce fire risk in electrical installations.

📐 Technical Specifications — Heat Shrink Tubing

Product Type	2:1 Polyolefin Heat Shrink Tubing
Shrink Ratio	2:1
Available Sizes (Expanded ID)	0.6mm, 0.8mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm
Available Colors	White, Red, Green, Blue, Transparent, Yellow, Black
Available Lengths	1m (≈3.3ft), 5m (≈16.4ft), 10m (≈32.8ft), 20m (≈65.6ft), 50m (≈164ft)
Material	Polyolefin (flame-retardant)
Activation Temperature	Typically 90–120°C (194–248°F)
Application	Wire insulation, bundling, strain relief, color coding
Compatibility	Copper, aluminum, tinned wire; crimp terminals, solder joints
Wall Thickness (post-shrink)	See variant options
Operating Temperature Range	Contact us to confirm

⚠️ Sizing tip: Always measure your wire's outer diameter before selecting a size. The expanded inner diameter should be at least 20–30% larger than your wire for easy installation.

❓ Frequently Asked Questions

How do I choose the right diameter for my wire?

Measure your wire or connector's outer diameter before shrinking. Choose a tubing size whose expanded inner diameter is at least 20–30% larger than your wire. After heat is applied, the tubing shrinks to approximately half its original diameter (2:1 ratio). For example, a 2mm tube shrinks to roughly 1mm. When in doubt, size up — you can always apply more heat, but you can't un-shrink tubing.

What shrink ratio does this tubing use?

This tubing uses a 2:1 shrink ratio, meaning it shrinks to approximately half its original expanded diameter when heat is applied. This is the most common ratio for general-purpose wire insulation and bundling applications.

What temperature is needed to shrink this tubing?

Generally, a heat gun set to around 90–120°C (194–248°F) is sufficient to activate the shrink. A standard heat gun, lighter, or even a hair dryer on high heat can work for smaller diameters. Avoid open flames directly on the tubing to prevent scorching.

Is this heat shrink tubing waterproof or suitable for outdoor use?

This tubing provides a weatherproof seal once properly shrunk, making it suitable for outdoor, automotive, and marine environments. It resists moisture, dust, and mild chemical exposure. For fully submersed or extreme environments, we recommend confirming suitability with our team.

What materials and wire types is this tubing compatible with?

This heat shrink tubing is generally compatible with copper, aluminum, and tinned wire, as well as most standard connectors, terminals, and solder joints. It works with both stranded and solid core wire. Always verify the expanded inner diameter matches your wire gauge before ordering.

Can I cut the tubing to a custom length?

Yes. The tubing is sold in continuous rolls (1m, 5m, 10m, 20m, or 50m) and can be cut to any length with scissors or a utility knife. This makes it easy to use for both short repairs and large wiring projects.

Why are there different colors available?

Color-coding is a standard practice in electrical wiring to identify circuits, polarity, or wire function at a glance. For example, red is typically used for positive leads, black for negative or ground, and other colors for signal or auxiliary wires. Transparent tubing lets you see the wire or label underneath.

🛒 Select your size, color, and length above, then add to cart — ships from our US warehouse.