5 Metre Stainless Steel Strip A2 304 Metal Sheet Foil Band Roll 0.1-0.5 mm Thick

For shimming and precision gap-filling, 0.1 mm–0.2 mm is the most common range. For light banding, clamping, or structural backing strips where some rigidity is needed, 0.3 mm–0.5 mm provides more stiffness. If you are unsure, start with 0.2 mm as a mid-range option that balances flexibility and strength.

For small-diameter hoses or cable bundles (under 20 mm diameter), a 5 mm or 10 mm wide strip is typically sufficient. For larger hoses or where a wider bearing surface is needed to distribute clamping load, choose 20 mm or 40 mm width.

304 (A2) stainless steel performs well in most outdoor environments and resists general atmospheric corrosion. However, for prolonged exposure to salt spray or coastal marine conditions, 316 (A4) grade is recommended. For standard outdoor DIY, garden, or light industrial use, 304 is a practical and cost-effective choice.

Yes. At 0.1 mm–0.5 mm thickness, the strip can be cut cleanly with aviation snips, a rotary cutter with a metal blade, or bench shears. A steel rule and scribe are recommended for marking accurate cut lines. Thicker variants (0.4 mm–0.5 mm) may require more cutting force; aviation snips or tin snips with compound action handles are ideal.

Yes. The cold-rolled production process gives the strip consistent thickness across its length, which is important for shimming applications where dimensional accuracy matters. Select the thickness that matches your required gap — multiple layers can be stacked for fine adjustment.

The strip is supplied as a coiled roll. Thinner gauges (0.1 mm–0.2 mm) will have some natural curl from the coil and can be flattened by hand or by running over a flat edge. Thicker gauges (0.3 mm–0.5 mm) retain less curl and flatten more readily. For applications requiring a completely flat piece, allow the strip to rest flat under light weight for a short period after cutting.

Yes. The mill finish surface is smooth and consistent, making it suitable for decorative inlay channels in wood or composite materials. The 5 mm and 10 mm widths are popular for furniture banding. The strip can be bonded with metal-compatible epoxy or contact adhesive, or mechanically fixed with small fasteners.