90° End Feed Elbow Copper Pipe Fitting | 6.35mm–159mm | Plumbing Bend

Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild

90° End Feed Elbow Copper Pipe Fitting | 6.35mm–159mm | Plumbing Bend

HomeDIYer

Keine Bewertungen

By HomeDIYer®

Inner Diameter x Wall Thickn: 6.35mm x 0.8mm

Amount: 1 Pcs

Preis:

$2.00 USD

Lagerbestand:

Verfügbar (500 Stück), versandbereit

Menge:

Teile dieses Produkt

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

90° End Feed Copper Elbow Fittings — Reliable Direction Changes for Any Plumbing System

When a pipe run needs to turn a corner and there's no room for error, the fitting you choose matters. Whether you're a professional plumber roughing in a new build or a confident DIYer rerouting a water supply line, a leaky or ill-fitting elbow can mean callbacks, water damage, and wasted time. These 90° end feed copper elbow fittings are designed for plumbers, heating engineers, and serious DIYers who need a dependable, solderable connection that holds up over decades of service.

Each fitting is manufactured from copper and features a clean, smooth socket bore sized to accept standard copper tube. Available in inner diameters from 6.35mm (≈1/4") to 159mm (≈6-1/4"), with wall thicknesses ranging from 0.75mm to 3.0mm depending on the size — giving you the right combination of bore and wall strength for your specific application. Select your inner diameter and wall thickness from the variant options above.

These copper 90-degree elbows are widely used in domestic cold and hot water supply lines, central heating and radiator circuits, and light commercial plumbing installations. They're also a go-to choice for copper pipe direction changes in underfloor heating manifold connections and boiler pipework where a soldered joint is preferred over compression fittings.

🔵 Compatibility: Designed for use with EN 1057 copper tube. Match the fitting's inner diameter to your pipe's outer diameter. Suitable for water supply, heating, and general plumbing systems. Always verify nominal pipe size before ordering.

✅ Key Features of These 90° End Feed Copper Elbow Fittings

🔄True 90° Bend Angle — Delivers a precise right-angle direction change in copper pipework, ideal for tight corners in wall cavities, under sinks, and behind appliances where space is limited.
🪙Copper Construction — Copper's natural antimicrobial properties and corrosion resistance make these elbows well-suited for potable water lines, hot water systems, and long-term plumbing installations.
📐Wide Size Range (6.35mm–159mm ID) — Covers everything from small-bore domestic supply lines to larger commercial pipe runs, reducing the need to source fittings from multiple suppliers for a single job.
🔥End Feed / Solder-Type Socket — The open-socket end feed design accepts standard lead-free solder, creating a strong, leak-free joint when properly fluxed and sweated — the preferred method for permanent copper pipe connections.
📏Multiple Wall Thickness Options — Choose from 0.75mm to 3.0mm wall thickness to match your system's pressure requirements, from standard residential water supply to higher-demand heating circuits.
🏠Versatile Application — Suitable for cold water supply, hot water distribution, central heating pipework, and light commercial plumbing — a single fitting type that works across multiple system types.

📐 Technical Specifications — 90° End Feed Copper Elbow Fittings

Fitting Type	90° End Feed Elbow (Solder-Type)
Material	Copper
Inner Diameter (ID) Range	6.35mm (≈1/4") – 159mm (≈6-1/4")
Wall Thickness Range	0.75mm – 3.0mm (varies by size)
Bend Angle	90°
Connection Method	End Feed / Capillary Solder
Compatible Tube Standard	EN 1057 Copper Tube (R220 / R250)
Suitable For	Cold water supply, hot water, central heating, light commercial
Finish	Natural copper
Quantity per Order	1 Pcs (see variant options)
Specific Size & Wall Thickness	See variant options above
Pressure Rating	Contact us to confirm for your specific size

⚠️ Note: End feed fittings require soldering. Ensure you use lead-free solder and appropriate flux for potable water systems. Always follow local plumbing codes and regulations for your installation.

❓ Frequently Asked Questions

How do I choose the right size elbow for my copper pipe?

Match the inner diameter (ID) of the fitting to the outer diameter (OD) of your copper pipe. For example, a 15mm ID elbow is typically used with 15mm nominal copper tube. If you're working in inches, 1/2" pipe is approximately 12.7mm (1/2") and 3/4" pipe is approximately 19mm (3/4"). Always verify your pipe's OD before ordering — nominal sizes can vary slightly by standard.

What wall thickness should I choose?

Wall thickness affects pressure rating and overall durability. For standard residential cold and hot water supply or central heating, 1.0mm–1.5mm wall thickness is generally sufficient. Thicker walls (2.0mm–3.0mm) are typically used in higher-pressure or industrial plumbing applications. If you have specific pressure requirements, contact us to confirm the right option.

Can these elbows be used for outdoor or underground plumbing?

Copper is naturally corrosion-resistant and is generally suitable for outdoor and underground use in most soil conditions. In highly acidic or aggressive soils, additional protection such as plastic sleeving may be recommended. Always follow local plumbing codes for buried copper pipe installations.

What is the pressure rating of these copper elbows?

Pressure ratings vary by inner diameter and wall thickness. In general, copper end feed fittings are rated for typical residential water supply pressures — typically up to approximately 10–15 bar depending on size and wall thickness. For specific pressure requirements, please contact us to confirm the appropriate variant for your system.

Are these fittings compatible with standard copper tube?

These end feed elbows are generally compatible with EN 1057 copper tube, the standard used across the US, UK, and EU for plumbing and heating applications. Always verify that the nominal size of the fitting matches your existing pipework before installation.

Do I need flux and solder to install these fittings?

Yes. End feed (capillary) fittings require soldering during installation. You will need lead-free solder and flux appropriate for potable water systems. Clean the pipe end and fitting socket thoroughly before applying flux and heat. Follow the solder manufacturer's instructions for best results.

Can I use these elbows for hot water and central heating systems?

Yes. Copper is well-suited for both hot and cold water systems as well as central heating circuits. These 90° elbows are commonly used in radiator connections, boiler pipework, and domestic hot water supply lines where a permanent, soldered joint is preferred.

🛒 Select your inner diameter and wall thickness above, then add to cart — ships from our US warehouse.

90° End Feed Elbow Copper Pipe Fitting | 6.35mm–159mm | Plumbing Bend

Payment & Security

Let customers speak for us

DIY Expert Support

Beschreibung

90° End Feed Copper Elbow Fittings — Reliable Direction Changes for Any Plumbing System

✅ Key Features of These 90° End Feed Copper Elbow Fittings

📐 Technical Specifications — 90° End Feed Copper Elbow Fittings

❓ Frequently Asked Questions

90° End Feed Elbow Copper Pipe Fitting | 6.35mm–159mm | Plumbing Bend

You may also like

Recently viewed