9mm PVC Heat Shrink Tubing for Battery Packs & Wire Wrapping – 7 Colors - HomeDIYer

Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild

9mm PVC Heat Shrink Tubing for Battery Packs & Wire Wrapping – 7 Colors

HomeDIYer

Keine Bewertungen

By HomeDIYer®

Colour: Black

Length: 1 Meter

Preis:

$2.84 USD

Lagerbestand:

Verfügbar (500 Stück), versandbereit

Menge:

Teile dieses Produkt

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

9mm PVC Heat Shrink Tubing — Clean Insulation for Battery Packs, Wire Bundles & Cable Repairs

Whether you're rebuilding a lithium battery pack, tidying up a wiring harness, or insulating exposed solder joints, loose or mismatched wire coverings create real safety risks and a messy finished product. DIYers, electronics hobbyists, and auto technicians who work with 18650 cells, custom cable assemblies, or panel wiring need a reliable, color-coded sleeve they can cut to length and shrink in seconds.

This 9mm PVC heat shrink tubing ships in your choice of seven colors — Black, White, Blue, Yellow, Transparent, Green, and Red — and is available in lengths from 1 meter (≈3.3 ft) up to 200 meters (≈656 ft) for bulk shop use. The expanded inner diameter is approximately 9mm, with a recovered diameter of generally 4–5mm after heat is applied (typically 90–120°C / 194–248°F). Each order is a single continuous roll in the selected color and length.

Typical use cases include wrapping individual 18650 and 26650 lithium battery cells for pack assembly, color-coding automotive and marine wiring harnesses, insulating soldered wire splices in home electrical projects, and organizing multi-conductor cable runs in control panels and DIY electronics builds.

ℹ️ Compatibility Note: Expanded inner diameter is approximately 9mm. Fits 18650 lithium cells and wire bundles or connectors typically in the AWG 6–12 range. Verify your component's outer diameter before ordering. Shrink ratio is generally 2:1.

✅ Key Features of These 9mm PVC Heat Shrink Tubes

🎨7-Color Selection — Available in Black, White, Blue, Yellow, Transparent, Green, and Red for easy color-coding of wiring harnesses and battery cell identification.
🔋Battery Pack Ready — Sized to fit standard 18650 lithium cells; widely used in DIY battery pack assembly, cell wrapping, and spot-weld insulation projects.
⚡Electrical Insulation — PVC material provides a reliable dielectric barrier over solder joints, wire splices, and exposed terminals to reduce short-circuit risk.
✂️Cut-to-Length Flexibility — Continuous roll format lets you cut exactly what you need; available from 1m sample lengths up to 200m bulk rolls for shop or production use.
🌡️Low Activation Temperature — Shrinks at generally 90–120°C (194–248°F), compatible with standard heat guns; no open flame required for a clean, even shrink.
🔌Versatile Fit Range — Approximately 2:1 shrink ratio means the recovered diameter is generally 4–5mm, covering a wide range of wire gauges, connectors, and small-diameter components.

📐 Technical Specifications — PVC Heat Shrink Tubing

Material	PVC (Polyvinyl Chloride)
Expanded Inner Diameter	9mm (≈0.35")
Recovered Inner Diameter	Generally 4–5mm (≈0.16–0.20") after full shrink
Shrink Ratio	Typically 2:1
Activation Temperature	Generally 90–120°C (194–248°F)
Available Colors	Black, White, Blue, Yellow, Transparent, Green, Red
Available Lengths	1m, 5m, 10m, 20m, 50m, 100m, 200m (continuous roll)
Wall Thickness (expanded)	See variant options
Voltage Rating	Contact us to confirm
Typical Applications	Battery cell wrapping, wire insulation, cable labeling, splice protection
Recommended Tool	Heat gun (lighter suitable for short sections only)

⚠️ Sizing Tip: Always measure the outer diameter of your wire, battery cell, or connector before selecting tubing. The expanded diameter should be slightly larger than your component for easy insertion; the recovered diameter should be smaller for a snug fit.

❓ Frequently Asked Questions

What length of heat shrink tubing do I need for my project?

For single battery cell wrapping or short wire repairs, 1–5 meters is generally sufficient. For larger wiring harnesses, panel builds, or bulk shop use, 20–100 meters is typically more cost-effective. As a rough guide, each meter covers approximately 3–5 standard 18650 battery cells end-to-end.

What is the shrink ratio, and what recovered diameter should I expect?

PVC heat shrink tubing typically has a shrink ratio of approximately 2:1, meaning it shrinks to roughly half its expanded diameter when heat is applied. For this 9mm tubing, the recovered diameter is generally around 4–5mm, making it suitable for objects in that range. Always test on a short sample piece first.

Can this tubing be used outdoors or in wet environments?

PVC heat shrink tubing provides basic moisture resistance and is suitable for indoor and light-duty outdoor use. For prolonged outdoor exposure, UV-heavy environments, or submersion, a dual-wall adhesive-lined heat shrink is generally recommended for a more reliable environmental seal.

What wire gauge or battery size does 9mm heat shrink tubing fit?

In its expanded state, 9mm tubing typically fits over objects up to approximately 8–9mm in outer diameter. This is well-suited for 18650 lithium battery cells, and wire bundles or connectors in the AWG 6–12 range. Always verify the outer diameter of your specific component before ordering.

What tool do I use to shrink this tubing?

A heat gun is the most reliable tool and is strongly recommended for even, controlled shrinkage. A lighter or match can work in a pinch for very short sections but may cause uneven shrinkage or surface scorching. PVC heat shrink generally activates at around 90–120°C (194–248°F).

Is this tubing safe for use on lithium battery packs?

Yes, PVC heat shrink tubing is widely used for wrapping individual lithium cells (such as 18650s) and battery pack assemblies. It provides electrical insulation and a clean finished appearance. Ensure the tubing is fully shrunk and free of gaps before use in any battery application.

Can I use this for color-coding wires or cables?

Absolutely. With 7 available colors — Black, White, Blue, Yellow, Transparent, Green, and Red — this tubing is well-suited for color-coding wiring harnesses, labeling cable runs, and organizing multi-conductor assemblies in automotive, marine, and DIY electronics applications.

🛒 Select your color and length above, then add to cart — ships from our US warehouse.

9mm PVC Heat Shrink Tubing for Battery Packs & Wire Wrapping – 7 Colors

Payment & Security

Let customers speak for us

DIY Expert Support

Beschreibung

9mm PVC Heat Shrink Tubing — Clean Insulation for Battery Packs, Wire Bundles & Cable Repairs

✅ Key Features of These 9mm PVC Heat Shrink Tubes

📐 Technical Specifications — PVC Heat Shrink Tubing

❓ Frequently Asked Questions

9mm PVC Heat Shrink Tubing for Battery Packs & Wire Wrapping – 7 Colors

You may also like

Recently viewed