Adhesive Heat Shrink Tubing — Glue Lined Waterproof Sleeving φ0.8mm to φ15mm

Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild

Adhesive Heat Shrink Tubing — Glue Lined Waterproof Sleeving φ0.8mm to φ15mm

Name: Adhesive Heat Shrink Tubing — Glue Lined Waterproof Sleeving φ0.8mm to φ15mm
Brand: HomeDIYer
Price: 1.73 USD
Availability: InStock

HomeDIYer

Keine Bewertungen

By HomeDIYer®

Colour: Transparent

Inner Diameter(mm): φ0.8mm

Hose Length (m）: 1 Metre

Preis:

$1.73 USD

Lagerbestand:

Verfügbar (500 Stück), versandbereit

Menge:

Teile dieses Produkt

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

Adhesive Heat Shrink Tubing — Waterproof Glue Lined Sleeving for Reliable Wire Protection

When a standard heat shrink tube just isn't enough — when moisture, vibration, or corrosion threaten your connections — DIYers, auto technicians, and marine electricians reach for dual-wall adhesive heat shrink tubing. A single layer of plain tubing leaves gaps at the ends; glue-lined tubing melts an inner adhesive layer that flows around the wire, sealing out water and locking the sleeve in place.

Each piece of this adhesive heat shrink tubing is made from a dual-wall construction: a polyolefin outer wall paired with a hot-melt adhesive inner lining. Available in transparent finish, inner diameters from φ0.8mm (≈1/32") to φ15mm (≈19/32"), and cut lengths of 1 m (≈3.3 ft), 2 m (≈6.6 ft), 5 m (≈16.4 ft), and 10 m (≈32.8 ft). The tubing carries a typical 2:1 shrink ratio, reducing to roughly half its listed inner diameter after heating.

Typical use cases include automotive wiring harness repair, marine and boat electrical connections exposed to salt spray, and outdoor low-voltage cable splices where long-term waterproofing is required. The transparent wall lets you inspect the underlying wire color coding without removing the sleeve — a practical advantage for troubleshooting glue-lined heat shrink wire connectors in tight spaces.

⚠️ Size confirmation: Inner diameter listed is the pre-shrink size. After heating, the tube shrinks to approximately half that diameter. If you are unsure which size fits your wire bundle, please contact us to confirm before ordering.

🔗 Compatibility: Suitable for copper, aluminum, and tinned wire conductors. Works with standard AWG and metric wire gauges. Compatible with heat guns, soldering station hot-air attachments, and similar controlled-heat tools. Not recommended for use with open flame.

✅ Key Features of These Adhesive Heat Shrink Tubing Sleeves

💧Waterproof Glue-Lined Seal — The inner hot-melt adhesive flows when heated, filling voids around the wire and creating a moisture-resistant barrier ideal for marine and outdoor waterproof wire splice applications.
🔍Transparent Wall for Easy Inspection — The clear polyolefin outer layer lets you verify wire color codes and inspect the connection without cutting the sleeve — useful for automotive harness diagnostics.
📏Wide Size Range φ0.8mm–φ15mm — Covers everything from delicate signal wires to heavier power cables, reducing the need to stock multiple product lines for different gauge heat shrink tubing projects.
✂️Cut-to-Length Flexibility — Sold in 1 m, 2 m, 5 m, and 10 m lengths so you can cut exactly what each job needs, minimizing waste on small repairs or stocking longer runs for production wiring work.
🌡️2:1 Shrink Ratio, Low Activation Temperature — Typically activates at around 90–120 °C (194–248 °F), compatible with most standard heat guns and making it practical for field repairs without specialized equipment.
🚗Vibration and Abrasion Resistance — Once the adhesive cures, the bonded sleeve resists movement and chafing, making it a reliable choice for automotive wiring harness protection and high-vibration industrial cable management.

📐 Technical Specifications — Adhesive Heat Shrink Tubing

Construction	Dual-wall: polyolefin outer / hot-melt adhesive inner lining
Color / Finish	Transparent
Inner Diameter (pre-shrink)	φ0.8mm (≈1/32") — φ15mm (≈19/32"); see variant options
Shrink Ratio	Typically 2:1 (shrinks to approx. half listed inner diameter)
Activation Temperature	Typically 90–120 °C (194–248 °F)
Available Lengths	1 m (≈3.3 ft) / 2 m (≈6.6 ft) / 5 m (≈16.4 ft) / 10 m (≈32.8 ft)
Wall Thickness (post-shrink)	See variant options
Adhesive Type	Hot-melt (activates during heat shrink process)
Conductor Compatibility	Copper, aluminum, tinned wire; AWG and metric gauges
Recommended Tool	Heat gun (controlled heat); open flame not recommended
Typical Applications	Automotive wiring, marine electrical, outdoor cable splices, DIY wire repair
Country of Origin	Contact us to confirm

❓ Frequently Asked Questions

How do I choose the right inner diameter for my wires?

Measure the outer diameter of your wire bundle before shrinking. As a general rule, choose a tube whose inner diameter is typically 1.2–1.5× the bundle diameter so it slides on easily. After heat is applied, the tube shrinks to roughly half its listed inner diameter, forming a tight, sealed fit. For example, a φ4mm tube will shrink down to approximately φ2mm after heating.

What shrink ratio does this tubing have?

This dual-wall tubing generally has a 2:1 shrink ratio, meaning it shrinks to approximately half its original inner diameter when heated. The inner adhesive layer melts simultaneously and flows to fill gaps, creating a waterproof seal around the conductor.

Can I use this tubing outdoors or in marine environments?

Yes. The glue-lined construction creates a moisture-resistant seal that is well suited for outdoor, marine, and automotive wiring exposed to water, humidity, and salt spray. For fully submerged applications, confirm the specific variant's rating with us before ordering.

What temperature is needed to shrink this tubing?

A heat gun set to approximately 90–120 °C (194–248 °F) is typically sufficient to activate shrinkage and melt the inner adhesive. Apply heat evenly by moving the gun along the tube rather than holding it in one spot. Avoid open flames, which can scorch the tubing unevenly and compromise the seal.

Is this tubing compatible with standard wire gauges like AWG or metric?

Yes. The range of inner diameters (φ0.8mm to φ15mm) covers a wide span of wire gauges from very fine signal wires up to heavier power cables. Refer to the variant size chart and match the pre-shrink inner diameter to your wire bundle's outer diameter. In most cases, a tube that is slightly larger than the bundle slides on easily and still shrinks down to a snug fit.

How long should I cut the tubing for a good seal?

In most cases, extending the tubing at least 10–15mm (≈3/8"–5/8") beyond each end of the splice or connector provides adequate overlap for a reliable seal. For high-vibration or high-moisture environments, a longer overlap — generally 20mm (≈3/4") or more — is recommended to ensure the adhesive fully bonds to the wire jacket on both sides.

Can I use this on automotive wiring harnesses?

Yes. Glue-lined heat shrink tubing is widely used in automotive wiring repairs and harness protection. The adhesive layer bonds to the wire jacket, resisting vibration, abrasion, and engine-bay moisture. The transparent wall is particularly useful in automotive applications because it allows you to verify wire color coding after installation without disturbing the repair.

🛒 Select your inner diameter and length above, then add to cart — ships from our US warehouse.

Adhesive Heat Shrink Tubing — Glue Lined Waterproof Sleeving φ0.8mm to φ15mm

Payment & Security

Let customers speak for us

DIY Expert Support

Beschreibung

Adhesive Heat Shrink Tubing — Waterproof Glue Lined Sleeving for Reliable Wire Protection

✅ Key Features of These Adhesive Heat Shrink Tubing Sleeves

📐 Technical Specifications — Adhesive Heat Shrink Tubing

❓ Frequently Asked Questions

Adhesive Heat Shrink Tubing — Glue Lined Waterproof Sleeving φ0.8mm to φ15mm

You may also like

Recently viewed