Bike and Motorcycle Handlebar Mount for GoPro DJI Insta360 Action Cameras, Aluminum Alloy Clamp with Optional 15cm Extension Rod

This mount is compatible with GoPro cameras (Hero series), DJI action cameras (Osmo Action series), and Insta360 cameras (X series, ONE RS, and similar models) that use a standard 1/4"-20 or GoPro-style mounting interface. It is also compatible with smartphones using an appropriate phone clamp adapter. Verify your camera's mounting interface before ordering.

The clamp is designed to fit standard bicycle and motorcycle handlebars, typically in the 22–32mm diameter range. This covers most road bikes, mountain bikes, and motorcycles. The bolt-tightening mechanism accommodates this range without adapters. If your handlebar diameter is outside this range, contact us to confirm compatibility before ordering.

The Standard-Clamp Kit includes the handlebar clamp and mounting hardware only — suitable for direct handlebar mounting without additional height. The Clamp+15cm Extension Rod Kit adds a 15cm (≈6") aluminum extension rod that raises the camera above the handlebar for a clearer field of view. The Single 15cm Extension Rod is sold separately for riders who already own the clamp and want to add or replace the extension rod.

The 15cm (≈6") extension rod raises the camera above the handlebar, windshield, or other obstructions that might otherwise appear in the frame. This is particularly useful on motorcycles with fairings or windshields, or on bicycles where the handlebar-mounted camera angle is too low to capture a clear forward view without the front wheel or handlebars in the shot.

The mount is constructed from aluminum alloy, nylon, and stainless steel — materials chosen for their combination of rigidity and vibration resistance. The bolt-tightening clamp mechanism locks the mount securely to the handlebar. For high-vibration motorcycle applications, ensure all bolts are tightened firmly before each ride and check periodically during longer trips.

Yes. The clamp design is compatible with both bicycle and motorcycle handlebars within the standard diameter range. The aluminum alloy and stainless steel construction is durable enough for the higher vibration levels typical of motorcycle use, while remaining lightweight enough for bicycle applications where minimizing added weight is a priority.

Installation typically requires a hex key (Allen wrench) to tighten the clamp bolts onto the handlebar. No drilling or permanent modification to the handlebar is required. The mount can be repositioned or removed without tools once the bolts are loosened.