Black Adhesive Heat Shrink Tubing 3:1 Ratio — φ1.6mm to φ65mm, 1M / 5M / 10M

Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild

Black Adhesive Heat Shrink Tubing 3:1 Ratio — φ1.6mm to φ65mm, 1M / 5M / 10M

Name: Black Adhesive Heat Shrink Tubing 3:1 Ratio — φ1.6mm to φ65mm, 1M / 5M / 10M
Brand: HomeDIYer
Price: 2.16 USD
Availability: InStock

HomeDIYer

Keine Bewertungen

By HomeDIYer®

Size: φ1.6mm

Length: 1M

Preis:

$2.16 USD

Lagerbestand:

Verfügbar (500 Stück), versandbereit

Menge:

Teile dieses Produkt

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

Adhesive Heat Shrink Tubing 3:1 Ratio — Waterproof Wire Protection from φ1.6mm to φ65mm

Loose wire splices, exposed connectors, and unprotected cable ends are a liability in any build — whether you're rewiring a boat, repairing a trailer harness, or finishing a custom electronics project. This dual-wall adhesive heat shrink tubing gives electricians, automotive technicians, and serious DIYers a reliable way to seal, insulate, and strain-relieve connections in one step.

Each piece is a dual-wall construction: a black polyolefin outer sleeve paired with a hot-melt adhesive inner lining. Available in 16 diameter sizes from φ1.6mm (≈1/16") to φ65mm (≈2-9/16"), and in lengths of 1M (≈3.3 ft), 5M (≈16.4 ft), and 10M (≈32.8 ft). The 3:1 shrink ratio means the tubing shrinks to approximately one-third of its listed diameter — far tighter than standard 2:1 tubing.

Typical applications include automotive wiring harness repairs, marine cable splicing, trailer connector sealing, data cable strain relief, and panel wiring in industrial enclosures. The adhesive liner flows into gaps and irregular surfaces, making it especially effective for waterproof heat shrink tubing for marine wiring and outdoor electrical connections.

🔌 Compatible with copper, aluminum, and multi-conductor cables. Suitable for use with heat guns (recommended) at typically 120–150°C (248–302°F). Works with standard wire gauges from 28 AWG fine wire up to large-diameter conduit and connector boots.

✅ Key Features of These Adhesive Heat Shrink Tubes

🔒3:1 Shrink Ratio — Shrinks to roughly one-third of its expanded diameter, conforming tightly around connectors, splices, and irregular cable profiles where standard 2:1 tubing falls short.
💧Dual-Wall Waterproof Construction — The inner hot-melt adhesive melts and flows during shrinking, creating a moisture-resistant seal ideal for waterproof heat shrink tubing in marine, automotive, and outdoor wiring applications.
📏Wide Diameter Range — 16 sizes from φ1.6mm to φ65mm cover everything from fine instrument wire to large cable bundles and connector boots, eliminating the need for multiple product SKUs.
✂️Cut-to-Length Flexibility — Available in 1M, 5M, and 10M rolls so you can cut exactly what you need for each connection, reducing waste on small repairs or stocking up for larger wiring harness projects.
🛡️Strain Relief & Corrosion Protection — The adhesive liner bonds to the cable jacket, providing mechanical strain relief at solder joints and crimp connections while blocking moisture and corrosive agents.
🚗Broad Application Compatibility — Suited for automotive wiring harness repair, trailer connector sealing, marine cable splicing, and DIY electronics enclosures — anywhere a durable, insulating sleeve is required.

📐 Technical Specifications — Dual-Wall Adhesive Heat Shrink Tubing

Material	Dual-wall polyolefin with hot-melt adhesive inner lining
Color	Black
Shrink Ratio	3:1
Expanded Inner Diameter (Size Options)	φ1.6mm (1/16") · φ2.4mm (3/32") · φ3.2mm (1/8") · φ4mm (5/32") · φ4.8mm (3/16") · φ6.4mm (1/4") · φ7.9mm (5/16") · φ9.5mm (3/8") · φ12.7mm (1/2") · φ15.4mm (5/8") · φ19.1mm (3/4") · φ25.4mm (1") · φ30mm (≈1-3/16") · φ39mm (≈1-9/16") · φ50mm (≈2") · φ65mm (≈2-9/16")
Available Lengths	1M (≈3.3 ft) · 5M (≈16.4 ft) · 10M (≈32.8 ft)
Shrink Temperature	Typically 120–150°C (248–302°F); use a heat gun for best results
Operating Temperature Range	See variant options / Contact us to confirm for specific grades
Adhesive Activation	Hot-melt inner adhesive activates during heat shrinking
Recommended Tool	Heat gun (open flame not recommended)
Suitable Wire Gauges	Generally 28 AWG (φ1.6mm) through large multi-conductor bundles (φ65mm)
Country of Origin	Contact us to confirm

⚠️ Size selection tip: The diameter listed is the expanded (before-shrink) inner diameter. Choose a size approximately 20–30% larger than your cable's outer diameter. After heating, the tubing will shrink to roughly 1/3 of the listed size.

❓ Frequently Asked Questions

How do I choose the right diameter for my cable?

Measure the outer diameter of your cable or connector before shrinking. The tubing diameter listed (e.g., φ6.4mm / 1/4") is the expanded inner diameter. After heating, it shrinks to approximately 1/3 of that size. As a general rule, choose a size that is 20–30% larger than your cable's outer diameter for a snug, secure fit.

What is the 3:1 shrink ratio and why does it matter?

A 3:1 shrink ratio means the tubing shrinks to roughly one-third of its original diameter when heat is applied. This is significantly more than standard 2:1 tubing, making it suitable for irregular shapes, connectors, and splices where a tighter seal is needed. It also allows the adhesive liner more time to flow and bond before the outer sleeve fully contracts.

Is this heat shrink tubing waterproof and suitable for outdoor or marine use?

Yes. The inner adhesive lining melts during shrinking and flows around the cable to create a moisture-resistant seal. It is generally suitable for outdoor, marine, and automotive environments where moisture ingress is a concern. For fully submersed or high-pressure wash-down applications, confirm suitability with your specific use case before installation.

What temperature do I need to shrink this tubing?

Typically, a heat gun set to around 120–150°C (248–302°F) is recommended. Move the heat gun slowly and evenly along the tubing to activate the adhesive and shrink the sleeve uniformly. Avoid open flames as they can scorch or unevenly shrink the tubing, compromising the seal.

Can I use this on automotive wiring and marine cables?

Yes. Dual-wall adhesive heat shrink tubing is widely used in automotive wiring harness repairs, marine cable splices, trailer wiring connections, and boat electrical systems. The adhesive liner provides strain relief and corrosion protection at solder joints and crimp connections — exactly where moisture and vibration cause the most damage over time.

How do I choose between 1M, 5M, and 10M lengths?

For a single repair or small project, 1M (≈3.3 ft) is typically sufficient. For wiring harness work, panel builds, or multiple connections of the same diameter, 5M (≈16.4 ft) or 10M (≈32.8 ft) rolls offer better value per meter. Each roll can be cut to any length you need with standard scissors or a utility knife.

What wire gauges does each diameter size generally cover?

As a general guide: φ1.6mm suits very fine wires (typically 28–24 AWG); φ3.2mm suits 22–18 AWG; φ6.4mm suits 16–14 AWG; φ9.5mm suits 12–10 AWG; larger diameters (φ12.7mm and above) are suited for multi-conductor cables, conduit ends, and large connector boots. Always verify by measuring your cable's actual outer diameter before ordering.

🛒 Select your size and length above, then add to cart — ships from our US warehouse.

Black Adhesive Heat Shrink Tubing 3:1 Ratio — φ1.6mm to φ65mm, 1M / 5M / 10M

Payment & Security

Let customers speak for us

DIY Expert Support

Beschreibung

Adhesive Heat Shrink Tubing 3:1 Ratio — Waterproof Wire Protection from φ1.6mm to φ65mm

✅ Key Features of These Adhesive Heat Shrink Tubes

📐 Technical Specifications — Dual-Wall Adhesive Heat Shrink Tubing

❓ Frequently Asked Questions

Black Adhesive Heat Shrink Tubing 3:1 Ratio — φ1.6mm to φ65mm, 1M / 5M / 10M

You may also like

Recently viewed