Clear Heat Shrink Tubing 1mm–50mm | 2:1, 3:1, 4:1 Ratio | Wire & Cable Insulation

Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild

Clear Heat Shrink Tubing 1mm–50mm | 2:1, 3:1, 4:1 Ratio | Wire & Cable Insulation

HomeDIYer

Keine Bewertungen

By HomeDIYer®

Diameter: φ1mm

Shrinking Ratio: 2:1

Length: 1M

Preis:

$1.84 USD

Lagerbestand:

Verfügbar (500 Stück), versandbereit

Menge:

Teile dieses Produkt

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

Clear Heat Shrink Tubing — Transparent Insulation for Wire, Cable & Connector Protection

Dealing with frayed wires, exposed splices, or connectors that need a clean, professional finish? Electricians, automotive technicians, and hands-on DIYers know that a reliable insulation sleeve makes the difference between a repair that lasts and one that fails. This clear heat shrink tubing gives you a transparent, tight-fitting protective layer without hiding the work underneath — so you can inspect connections at a glance.

Each order covers a single diameter and shrink ratio combination, available in lengths of 1M (≈39"), 2M (≈79"), 3M (≈118"), or 5M (≈197"). Diameter options span φ1mm (≈3/64") through φ50mm (≈2"), and shrink ratios include 2:1, 3:1, and 4:1 to handle everything from fine gauge wire to thick cable bundles. The tubing is made from flame-retardant polyolefin, a material known for its flexibility, chemical resistance, and consistent shrink performance.

Typical use cases include automotive wiring harness repair, marine cable protection, home electrical panel work, and hobby electronics assembly. Whether you are sealing a butt connector on a trailer hitch, protecting a sensor wire under the hood, or tidying up a DIY LED strip installation, this clear heat shrink tubing for wire insulation delivers a clean result every time.

🔌 Compatibility: Fits standard copper and aluminum wire, automotive harness connectors, marine-grade cable, and hobby electronics leads. Select your diameter based on the outer diameter of your wire or bundle — see FAQ below for sizing guidance.

✅ Key Features of These Clear Heat Shrink Tubing Sleeves

🔍Transparent Finish — Clear polyolefin construction lets you visually inspect the wire, splice, or connector underneath without cutting or removing the tubing — ideal for quality-control checks on automotive and marine wiring.
📐Wide Diameter Range — Available from φ1mm to φ50mm, covering fine gauge signal wires up to large-diameter power cables, so you can source the right size for every job from a single supplier.
🔥Three Shrink Ratios — Choose 2:1 for standard wire insulation, 3:1 for connectors and irregular shapes, or 4:1 for thick bundles and strain relief applications — each ratio shrinks evenly without cracking or splitting.
🛡️Flame-Retardant Polyolefin — The base material meets general flame-retardant standards, resists moisture ingress, and holds up against common automotive fluids and mild solvents encountered in under-hood and marine environments.
✂️Cut-to-Length Flexibility — Supplied in 1M, 2M, 3M, and 5M lengths so you can cut exactly what you need for each connection, reducing waste on small repairs or stocking up for larger heat shrink tubing DIY projects.
⚡Consistent Shrink Performance — Activates at approximately 90°C and fully shrinks at around 120°C, compatible with standard heat guns — no open flame required for a smooth, wrinkle-free finish on every application.

📐 Technical Specifications — Clear Polyolefin Heat Shrink Tubing

Material	Flame-retardant polyolefin
Color / Finish	Clear (transparent)
Diameter Range	φ1mm (≈3/64") – φ50mm (≈2")
Shrink Ratios Available	2:1 / 3:1 / 4:1
Lengths Available	1M (≈39") / 2M (≈79") / 3M (≈118") / 5M (≈197")
Activation Temperature	Typically ≈90°C (194°F)
Full Shrink Temperature	Typically ≈120°C (248°F)
Operating Temperature Range	Generally –55°C to +125°C (–67°F to +257°F)
Flame Retardancy	Flame-retardant (see variant options for specific rating)
Chemical Resistance	Resistant to moisture, mild acids, automotive fluids
Wall Thickness (pre-shrink)	See variant options
Recommended Tool	Heat gun (low to medium setting)
Typical Applications	Automotive wiring, marine cable, electronics, DIY electrical repair

⚠️ Sizing tip: Always measure the outer diameter of your wire or bundle before ordering. Select a tubing diameter that is 20–30% larger than your measurement to ensure the tubing slides on easily before shrinking. Contact us to confirm wall thickness for your specific variant.

❓ Frequently Asked Questions

How do I choose the right diameter for my wire or cable?

Measure the outer diameter of your wire or cable bundle, then select a tubing size that is typically 20–30% larger than that measurement. For example, a 4mm cable generally works well with φ5mm or φ6mm tubing at 2:1 ratio. After shrinking, the tubing will grip the cable snugly. When in doubt, size up — you can always go tighter with a higher shrink ratio.

What is the difference between 2:1, 3:1, and 4:1 shrink ratios?

The ratio describes how much the tubing shrinks in diameter when heat is applied. A 2:1 ratio means the tubing shrinks to half its original diameter, 3:1 to one-third, and 4:1 to one-quarter. Higher ratios are generally used for irregular shapes, connectors, or when you need to cover a wider range of diameters with a single piece.

Can this heat shrink tubing be used outdoors or in marine environments?

This tubing is made from polyolefin, which is generally resistant to UV exposure, moisture, and mild chemicals. It is suitable for most outdoor wiring applications such as automotive, marine, and garden lighting. For prolonged direct sunlight or harsh chemical environments, we recommend confirming suitability with your specific application requirements.

What temperature is needed to shrink this tubing, and what tool should I use?

Polyolefin heat shrink tubing typically activates at around 90°C (194°F) and fully shrinks at approximately 120°C (248°F). A heat gun set to low or medium is the recommended tool. Avoid open flames directly on the tubing, as uneven heat can cause bubbling or uneven shrinkage.

Is this tubing compatible with automotive wiring harnesses?

Yes. This clear heat shrink tubing is widely used in automotive wiring repairs, harness protection, and connector insulation. The clear finish allows you to inspect the wire or splice underneath without removing the tubing. It is compatible with standard automotive wire gauges typically ranging from AWG 28 down to AWG 2, depending on the diameter selected.

How much length do I need for my project?

Available lengths are 1M, 2M, 3M, and 5M per order. For small repairs or single connectors, 1M is generally sufficient. For wiring harness projects or bulk electrical work, 5M rolls offer better value. We recommend adding 10–15% extra to your measured length to account for trimming and positioning.

Does the clear tubing yellow or discolor over time?

Polyolefin tubing is generally resistant to yellowing under normal indoor and sheltered outdoor conditions. Prolonged exposure to intense UV radiation may cause slight discoloration over time. For applications where long-term optical clarity is critical, we recommend storing unused tubing away from direct sunlight.

🛒 Select your diameter, shrink ratio, and length above, then add to cart — ships from our US warehouse.

Clear Heat Shrink Tubing 1mm–50mm | 2:1, 3:1, 4:1 Ratio | Wire & Cable Insulation

Payment & Security

Let customers speak for us

DIY Expert Support

Beschreibung

Clear Heat Shrink Tubing — Transparent Insulation for Wire, Cable & Connector Protection

✅ Key Features of These Clear Heat Shrink Tubing Sleeves

📐 Technical Specifications — Clear Polyolefin Heat Shrink Tubing

❓ Frequently Asked Questions

Clear Heat Shrink Tubing 1mm–50mm | 2:1, 3:1, 4:1 Ratio | Wire & Cable Insulation

You may also like

Recently viewed