CM-M2F M.2 2280 SSD Cooler with Active Fan & ARGB — 1mm Brass Thermal Pad, 9000 RPM, 5V 3-Pin

Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild

CM-M2F M.2 2280 SSD Cooler with Active Fan & ARGB — 1mm Brass Thermal Pad, 9000 RPM, 5V 3-Pin

Name: CM-M2F M.2 2280 SSD Cooler with Active Fan & ARGB — 1mm Brass Thermal Pad, 9000 RPM, 5V 3-Pin
Brand: HomeDIYer
Price: 35.0 USD
Availability: InStock

HomeDIYer

Keine Bewertungen

By HomeDIYer®

Color: Black

Preis:

$35.00 USD

Lagerbestand:

Verfügbar (500 Stück), versandbereit

Menge:

Teile dieses Produkt

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

CM-M2F M.2 2280 SSD Cooler with Active Fan — Brass Thermal Pad, ARGB, 9000 RPM

PCIe Gen 4 and Gen 5 NVMe SSDs are fast — but they run hot. Under sustained sequential reads and writes, many high-performance drives exceed 70°C and begin thermal throttling, cutting transfer speeds by 30–50% to protect the controller. Passive heatsinks help, but in cases with limited airflow they often can’t keep up. The CM-M2F M.2 2280 SSD cooler with active fan combines a 1mm brass thermal contact plate, an aluminum fin heatsink, and a 9000 RPM integrated fan to actively pull heat away from the drive — keeping your SSD running at full speed even under sustained workloads. It’s built for PC builders and content creators who demand consistent storage performance.

Each order includes 1 × CM-M2F active SSD cooler (heatsink body with integrated fan), a 1mm brass thermal pad, a silicone thermal pad, mounting screws, and a 420mm (16.5") ARGB cable with 5V 3-Pin male and female connectors for daisy-chaining. The cooler body is constructed from ABS + aluminum alloy + stainless steel, with a 1mm brass plate as the primary thermal interface between the SSD and the heatsink. Dimensions: 76 × 24 × 14mm (3.0" × 0.94" × 0.55"). Weight: 125g (≈4.4 oz). Available in Black and White.

This cooler is ideal for high-performance NVMe Gen 4 and Gen 5 SSD cooling in gaming PCs and workstations where sustained read/write speeds matter, as an active M.2 cooler for compact ITX builds where passive cooling is insufficient due to limited case airflow, and for builders who want ARGB-synchronized SSD cooling that integrates with their motherboard’s 5V lighting ecosystem without occupying additional headers.

🔌 Compatibility: Fits M.2 2280 SSDs only (80mm length). Compatible with NVMe PCIe Gen 3, Gen 4, and Gen 5, and SATA M.2 drives. ARGB requires a 5V 3-Pin ARGB header on your motherboard. Remove any existing motherboard M.2 shield before installation.

✅ Key Features of These M.2 2280 SSD Coolers with Active Fan

🧲1mm Brass Thermal Contact Plate — A 1mm thick brass plate sits directly between the SSD chips and the aluminum heatsink body. Brass conducts heat more rapidly than standard polymer thermal pads, accelerating heat transfer from the drive surface to the fin structure where the fan can exhaust it. This is particularly effective for Gen 4 and Gen 5 NVMe drives that generate concentrated heat at the controller chip.
💨9000 RPM Active Cooling Fan — The integrated high-speed fan creates strong suction airflow across the aluminum fin array, actively pulling heat away from the heatsink surface. At 9000 ±10% RPM, the fan moves significantly more air than passive convection alone, making this cooler effective even in cases with limited internal airflow.
🌈5V 3-Pin ARGB with Daisy-Chain Support — The 420mm (16.5") ARGB cable features both male and female 5V 3-Pin connectors, allowing multiple ARGB devices to be chained in series from a single motherboard header. The ARGB lighting syncs with major motherboard software ecosystems including ASUS Aura Sync, MSI Mystic Light, and Gigabyte RGB Fusion.
🏗️ABS + Aluminum Alloy + Stainless Steel Construction — The three-material body combines an ABS fan housing for lightweight structure, an aluminum alloy fin heatsink for heat dissipation, and stainless steel mounting hardware for secure, corrosion-resistant installation. The compact 76 × 24 × 14mm profile fits within standard M.2 slot clearances on most motherboards.
🔇Hydraulic Bearing Fan Motor, 60,000-Hour Rated — The hydraulic bearing design reduces friction and bearing noise compared to sleeve bearing motors, contributing to quieter operation at sustained high RPM. The motor is rated for up to 60,000 hours of continuous use, making this a long-term cooling solution for always-on workstations or NAS builds.
📦Complete Installation Kit Included — Each package includes the active cooler, 1mm brass thermal pad, silicone thermal pad, mounting screws, and ARGB cable. No additional thermal compound or hardware purchases are needed. Installation requires only a small Phillips screwdriver and takes approximately 3–5 minutes.

📐 Technical Specifications — M.2 2280 Active SSD Cooler

Model	CM-M2F (HS-NVMEM2F02)
Compatible SSD Form Factor	M.2 2280 (80mm length)
Compatible SSD Interface	NVMe PCIe Gen 3 / Gen 4 / Gen 5, SATA M.2
Cooler Dimensions	76 × 24 × 14mm (3.0" × 0.94" × 0.55")
Weight	125g (≈4.4 oz)
Body Material	ABS + Aluminum Alloy + Stainless Steel
Thermal Interface	1mm Brass Thermal Plate + Silicone Thermal Pad
Cooling Method	Active (Integrated Fan + Aluminum Fin Heatsink)
Fan Speed	9000 RPM ±10%
Noise Level	≤25 dBA
Fan Bearing Type	Hydraulic Bearing
Fan Rated Lifespan	60,000 hours
ARGB Connector	5V 3-Pin (Male + Female, Daisy-Chain)
ARGB Cable Length	420mm (≈16.5")
Available Colors	Black / White
Package Contents	1 × Active SSD Cooler, 1mm Brass Thermal Pad, Silicone Thermal Pad, Mounting Screws, ARGB Cable, Retail Box

⚠️ Before ordering: Confirm your SSD is the M.2 2280 (80mm) form factor. A 5V 3-Pin ARGB header is required on your motherboard for lighting. Remove any existing motherboard M.2 shield before installation. The fan runs at fixed speed — PWM speed control is not supported.

❓ Frequently Asked Questions

What SSD form factor does the CM-M2F fit?

The CM-M2F is designed specifically for M.2 2280 SSDs — the most common M.2 size, measuring 80mm (approximately 3.15") in length. It is not compatible with M.2 2242 or M.2 22110 drives. Check your SSD label or motherboard manual to confirm your drive is the 2280 size before ordering.

Why does this cooler use a brass thermal pad instead of a standard thermal pad?

Brass has higher thermal conductivity than most polymer thermal pads. The 1mm brass plate sits between the SSD chips and the aluminum heatsink body, rapidly drawing heat away from the drive surface and transferring it upward to the fin structure where the fan exhausts it. This two-stage heat transfer path is more effective than a passive heatsink alone, especially under sustained Gen 4 or Gen 5 NVMe workloads.

How loud is the 9000 RPM fan during operation?

The fan operates at 9000 ±10% RPM and is rated at up to 25 dBA. At this speed, the fan is audible but generally not intrusive in a typical desktop case environment. The hydraulic bearing design reduces bearing noise compared to sleeve bearing fans. Note that the fan runs at fixed speed — it does not slow down at idle.

How does the 5V 3-Pin ARGB daisy-chain connection work?

The CM-M2F uses a standard 5V 3-Pin ARGB connector that plugs into your motherboard’s 5V ARGB header. The daisy-chain design means the cable has both a male and female ARGB connector, allowing you to chain multiple ARGB devices in series from a single motherboard header — useful when your motherboard has limited ARGB headers. Compatible with ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, and other 5V ARGB ecosystems.

Is this cooler compatible with NVMe Gen 4 and Gen 5 SSDs?

Yes. The CM-M2F is compatible with NVMe PCIe Gen 3, Gen 4, and Gen 5 SSDs, as well as SATA M.2 drives — all in the M.2 2280 form factor. Gen 4 and Gen 5 drives run significantly hotter than Gen 3 and benefit most from active cooling. The brass thermal pad and 9000 RPM fan combination is particularly effective for high-performance NVMe drives under sustained workloads.

Will this cooler fit if my motherboard already has an M.2 shield installed?

If your motherboard has a factory M.2 heatsink or shield installed, you will need to remove it before fitting the CM-M2F. Most motherboard M.2 shields are held by one or two screws and can be removed in under a minute. Refer to your motherboard manual for the correct removal procedure.

What is included in the package?

Each order includes: 1 × CM-M2F active SSD cooler (heatsink body with integrated fan), 1 × 1mm brass thermal pad, 1 × silicone thermal pad, mounting screws, a 420mm (16.5") ARGB cable with 5V 3-Pin male and female connectors, and retail box packaging. No additional thermal compound or hardware is needed.

Does the fan speed adjust automatically based on SSD temperature?

No. The CM-M2F fan runs at a fixed speed of 9000 ±10% RPM whenever the system is powered on. It does not support PWM speed control. The 5V 3-Pin ARGB connector powers both the fan and the lighting simultaneously. If variable fan speed is required, an inline fan controller can be used with the power connection.

🛒 Select your color above, then add to cart.

CM-M2F M.2 2280 SSD Cooler with Active Fan & ARGB — 1mm Brass Thermal Pad, 9000 RPM, 5V 3-Pin

Payment & Security

Let customers speak for us

DIY Expert Support

Beschreibung

CM-M2F M.2 2280 SSD Cooler with Active Fan — Brass Thermal Pad, ARGB, 9000 RPM

✅ Key Features of These M.2 2280 SSD Coolers with Active Fan

📐 Technical Specifications — M.2 2280 Active SSD Cooler

❓ Frequently Asked Questions

CM-M2F M.2 2280 SSD Cooler with Active Fan & ARGB — 1mm Brass Thermal Pad, 9000 RPM, 5V 3-Pin

You may also like

Recently viewed