Fine Steel Wire Elastic Metal Cable Riggin Diameter: 0.5mm Sold by meter DIY

This wire is 0.5mm in diameter (approximately 0.020 inches). At this gauge it is suited to light-duty applications such as craft wire work, model building, thin rigging lines, and binding tasks. It is not intended for structural load-bearing use. If your project requires a heavier gauge, check our other wire listings.

At 0.5mm, this steel wire handles light-duty rigging and tensioning — for example, hanging lightweight frames, securing small components, or craft rigging on models. For applications with significant mechanical load or safety requirements, please contact us to confirm suitability before ordering.

This is a steel wire. Standard steel wire can be susceptible to surface oxidation if exposed to moisture over extended periods. For outdoor or high-humidity environments, consider applying a protective coating after installation, or contact us to ask about alternative material options.

You will need ferrules or crimps rated for 0.5mm wire diameter. Always verify the inner bore of your crimp or ferrule matches the wire gauge before purchasing hardware. Using an oversized crimp can result in a weak connection; an undersized one may not seat at all.

Measure the total wire length your project requires, then add 10–15% for trimming and termination. The 1-meter pack suits single small repairs or samples; the 2-meter pack covers most craft and hobby projects; the 5-meter pack is economical for multiple runs or larger rigging layouts.

Yes. At 0.5mm, this wire is a common gauge for jewelry wire wrapping, beading frames, and structural elements in handmade jewelry. Its flexibility allows shaping without specialized tools, though heavier-gauge pliers may be needed for tight bends.

Each unit is one continuous 1-meter length. A 2-pcs pack contains two separate 1-meter pieces; a 5-pcs pack contains five separate 1-meter pieces. They are not joined or wound on a spool — each meter arrives as an individual cut length.