GT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D Printer
GT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D Printer
GT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D Printer
GT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D Printer
GT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D Printer
GT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D Printer
GT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D Printer
GT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D Printer
GT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D Printer
GT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D Printer
GT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D Printer
GT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D Printer
GT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D Printer
GT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D Printer
GT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D Printer
GT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D Printer
GT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D Printer
Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild
GT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D PrinterGT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D PrinterGT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D PrinterGT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D PrinterGT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D PrinterGT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D PrinterGT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D PrinterGT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D PrinterGT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D PrinterGT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D PrinterGT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D PrinterGT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D PrinterGT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D PrinterGT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D PrinterGT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D PrinterGT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D PrinterGT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D Printer

GT2 Closed Loop Timing Belt 6mm Width 2mm Pitch – 176mm to 228mm for 3D Printer

HomeDIYer
Keine Bewertungen

By HomeDIYer®

Preis:
$7.96 USD
Lagerbestand:
Verfügbar (500 Stück), versandbereit

Payment & Security

Ach Direct Debit Amazon American Express Apple Pay Bancontact Diners Club Discover Google Pay iDEAL Wero Mastercard PayPal Shop Pay USDC Visa

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

Quantity Discount Promotion
🎯 BULK DISCOUNT: Buy More, Save More!
Buy 2 Items
5% OFF
Buy 4 Items
10% OFF
Buy 6 Items
15% OFF
✅ Auto-discount • 🔄 Mix & match
Expert

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM
WhatsApp WhatsApp Email
⚡
24-Hour Fast Ship
🚚
Arrives in 3-14 days
🌍
Global Reach
↩️
30-Day Returns
🌱 1 tree planted with every purchase

Beschreibung

GT2 Closed Loop Timing Belt 6mm 2mm Pitch — Precision Drive for 3D Printers

Layer shifts and inconsistent print dimensions are often traced back to a worn or incorrectly sized timing belt. Whether you're maintaining a Creality Ender, a Prusa-style machine, or a custom build, having the right GT2 closed loop timing belt on hand means you can get back to printing without waiting days for a replacement to arrive.

Each belt in this listing is a closed loop GT2 timing belt with a 6mm width and 2mm pitch — the standard specification for most desktop 3D printers. Available lengths run from 176mm (≈6.93") to 228mm (≈8.98"), covering 20 distinct sizes. The belt body is constructed from a rubber elastomer with internal cord reinforcement for low stretch and consistent tension over time. Order in quantities of 1, 2, 5, 10, or 20 pieces depending on your maintenance needs.

Typical applications include X-axis and Y-axis drive loops on Cartesian 3D printers, light-duty CNC router motion systems, and small robotic actuator assemblies where a GT2 closed loop timing belt replacement is required. The 2mm pitch profile ensures smooth pulley engagement and repeatable positioning — critical for dimensional accuracy in FDM printing.

ℹ️ Compatibility: Fits standard GT2 pulleys with 2mm pitch and 6mm belt width. Compatible with Creality Ender series, Prusa i3-style printers, Anet, Tronxy, and similar platforms. Verify your required belt loop length before selecting a variant.
⚠️ Size Note: Belt length refers to the total closed loop circumference, not the span between pulleys. Measure your existing belt or calculate from your pulley center distance before ordering. If unsure, contact us to confirm.

✅ Key Features of These GT2 Closed Loop Timing Belts

  • 🔁Closed Loop Design — Seamless loop construction eliminates the splice point weakness found in cut-to-length belts, providing uniform tension around the entire circuit.
  • 📐GT2 2mm Pitch Profile — Curved tooth geometry reduces backlash compared to trapezoidal profiles, supporting the positional accuracy needed for GT2 closed loop timing belt replacement on precision motion axes.
  • 📏20 Length Options (176mm–228mm) — Fine-grained size selection from 176mm (≈6.93") to 228mm (≈8.98") covers a wide range of Cartesian 3D printer X/Y axis configurations without modification.
  • 🧵Reinforced Cord Core — Internal cord reinforcement (typically fiberglass or steel) limits belt stretch under load, maintaining consistent layer registration during long print runs.
  • 📦Flexible Quantity Options — Available in 1, 2, 5, 10, or 20-piece packs, making it practical to stock spares for a single machine or maintain a small print farm.
  • 🏭6mm Standard Width — Matches the belt channel width on the vast majority of desktop 3D printer carriages and idler assemblies, fitting without modification to standard GT2 pulley and idler setups.

📐 Technical Specifications — GT2 Closed Loop Timing Belt

Belt Type GT2 Closed Loop Timing Belt
Tooth Pitch 2mm (GT2 profile)
Belt Width 6mm (≈0.24")
Available Lengths 176mm (≈6.93"), 178mm (≈7.01"), 180mm (≈7.09"), 182mm (≈7.17"), 184mm (≈7.24"), 186mm (≈7.32"), 188mm (≈7.40"), 190mm (≈7.48"), 192mm (≈7.56"), 194mm (≈7.64"), 200mm (≈7.87"), 202mm (≈7.95"), 204mm (≈8.03"), 208mm (≈8.19"), 214mm (≈8.43"), 218mm (≈8.58"), 220mm (≈8.66"), 222mm (≈8.74"), 224mm (≈8.82"), 228mm (≈8.98")
Belt Material Rubber elastomer (neoprene or equivalent)
Reinforcement Internal cord (fiberglass or steel — see variant options)
Tooth Profile GT2 curved (not compatible with MXL or T2.5 pulleys)
Loop Type Seamless closed loop
Quantity Options 1, 2, 5, 10, or 20 pieces per order
Primary Application 3D printer X/Y axis, light CNC motion, small robotics
Tensile Rating Contact us to confirm
Operating Temperature See variant options

❓ Frequently Asked Questions

How do I choose the right belt length for my 3D printer?

Measure the center-to-center distance of your pulleys, then calculate the required belt loop length: belt length ≈ 2 × center distance + (π × pulley pitch diameter). For most desktop 3D printers, lengths in the 176mm–228mm range are typically used on the X or Y axis. When in doubt, consult your printer's documentation or measure the original belt directly. Available sizes include 176mm (≈6.93"), 180mm (≈7.09"), 200mm (≈7.87"), and 18 additional options.

What tensile strength do these GT2 timing belts have?

GT2 closed loop belts of this type are generally rated for the light-to-medium loads typical of 3D printer motion systems. The internal cord reinforcement provides low stretch and consistent tension over time. Exact tensile ratings vary by production batch; contact us to confirm if you need specific load data for your application.

Can these belts be used outdoors or in humid environments?

These belts are made from a rubber elastomer with internal cord reinforcement, designed primarily for indoor use in controlled environments. Prolonged exposure to UV radiation, moisture, or extreme temperatures may reduce service life. For outdoor or harsh-environment applications, contact us to confirm suitability before ordering.

What pulley standard do these belts fit?

These are GT2-profile belts with a 2mm pitch and 6mm width. They are compatible with standard GT2 pulleys (2mm pitch, 6mm belt width) commonly found on Creality Ender series, Prusa i3-style, Anet, Tronxy, Voron, and similar 3D printer platforms. They are not interchangeable with MXL, T2.5, or HTD pulleys — always verify your pulley's tooth profile before ordering.

How do I know if I need to replace my 3D printer timing belt?

Common signs include layer shifting in prints, visible cracks or fraying on the belt surface, inconsistent print dimensions, or a belt that feels loose even after tensioning. If your printer is producing artifacts that can't be resolved by re-tensioning, replacing the belt is generally the next recommended step. Keeping a spare on hand avoids downtime.

How many belts do I need for a typical 3D printer?

Most Cartesian-style 3D printers use two closed loop belts — one for the X axis and one for the Y axis. CoreXY printers typically use open-loop belts instead. Check your printer's design before ordering. Buying a 2-pack or 5-pack is a practical choice for keeping spares on hand, especially if you run multiple machines.

What is the difference between GT2 and other belt profiles like MXL or T2.5?

GT2 (2mm pitch, curved tooth profile) is designed to reduce backlash and improve positional accuracy compared to older trapezoidal profiles like MXL or T2.5. GT2 is the de facto standard for desktop 3D printers because of its smooth pulley engagement and low backlash characteristics. These belts are not interchangeable with MXL or T2.5 pulleys — the tooth geometry is different.

🛒 Select your belt length and quantity above, then add to cart — ships from our US warehouse.

You may also like

Recently viewed