8"-17" Heavy Duty Hand Pop Rivet Gun Tool Kit With Rivets 4 Nozzle Head Wrench

Single-handle models (8" and 9.5") are compact and well-suited for light-duty tasks in confined spaces, such as HVAC duct work or small panel repairs. Double-handle models (12.5", 13", 14", 17") provide greater mechanical leverage, making them easier to use on thicker materials or during extended riveting sessions where hand fatigue is a concern. If you're unsure, the 12.5" double-handle is a versatile middle-ground choice.

The four included nozzle heads are sized for the most common standard blind rivet diameters: typically 3/32" (2.4mm), 1/8" (3.2mm), 5/32" (4.0mm), and 3/16" (4.8mm). Always verify the rivet diameter stamped on your rivet packaging matches the nozzle head you select before pulling the handle.

This tool is designed and rated for standard aluminum blind rivets. While it may physically accept steel rivets of the same diameter, the pull force required for steel or stainless steel rivets is significantly higher and may exceed the tool's rated capacity, risking jaw damage or incomplete rivet setting. For steel or stainless rivets, a pneumatic or heavy-duty industrial rivet gun is recommended.

Yes — blind rivets require a pre-drilled hole that matches the rivet body diameter. The bundle variants that include 2 twist drill bits are sized to match the rivets in the kit, so you can drill and rivet without sourcing separate bits. If you already have a drill set, the rivet-only bundles are a cost-effective option.

The included rivets are aluminum, which offers good natural corrosion resistance for general outdoor and light marine applications. For environments with prolonged salt water exposure or harsh chemical contact, consider sourcing stainless steel or monel rivets separately and using this gun as the setting tool.

Both variants use the same rivet gun body. The storage box variant includes a carry case that organizes the nozzle heads, rivets, and drill bits in one place — useful for mobile repair work, shared tool storage, or keeping a jobsite kit intact. The double-handle variant without a box is a lighter carry option if you already have your own storage solution.

Nozzle heads on this tool are threaded onto the nose of the gun. To change: (1) unscrew the current nozzle head counterclockwise by hand or with the included wrench, (2) select the nozzle head matching your rivet diameter, and (3) thread it on clockwise until snug. No special tools are required beyond the wrench included in the kit.