M3 M6 Knurled Thumb Screws Aluminum Alloy PC Case Cover Hand Tighten Bolts 3/6mm

Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild

M3 M6 Knurled Thumb Screws Aluminum Alloy PC Case Cover Hand Tighten Bolts 3/6mm

HomeDIYer

Keine Bewertungen

By HomeDIYer®

Colour: Claret

Thread Dia * Length: M3*5mm

Head Dia*Thick(mm) & Qty(pcs): 10*5mm & 2 pcs

Preis:

$7.47 USD

Lagerbestand:

Verfügbar (500 Stück), versandbereit

Menge:

Teile dieses Produkt

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

M3 M6 Knurled Thumb Screws — Tool-Free Fastening for PC Builds & DIY Projects

When you're mid-build and reach for a screwdriver only to realize the panel screw is buried under cables, you know the frustration. PC builders, electronics hobbyists, and makers who frequently open enclosures need knurled thumb screws that can be tightened and loosened by hand — quickly, cleanly, and without tools. These M3 M6 knurled thumb screws are designed for exactly that workflow.

Each screw is machined from aluminum alloy with a knurled head for a secure finger grip. The head diameter measures 10 mm with a thickness of either 5 mm or 6 mm depending on the selected variant. Thread diameters cover M3 and M6, with shaft lengths ranging from 5 mm to 50 mm (approximately 0.20 in to 1.97 in). Sold in packs of 2 or 5 pieces per order.

Typical applications include PC case side panel fastening, DIY electronics enclosures, 3D printer frame assembly, and lightweight aluminum chassis work where repeated access is needed. The anodized color finish makes these knurled thumb screws easy to identify in a parts tray and adds a clean aesthetic to visible fastener locations.

⚙️ Compatible with standard M3 and M6 threaded holes. Verify thread pitch and hole depth before ordering. Not suitable for high-torque structural applications.

✅ Key Features of These Knurled Thumb Screws

🔩 Aluminum Alloy Construction

Machined from aluminum alloy for a balance of low weight and adequate strength in panel-fastening and enclosure applications.

✋ Knurled Head for Tool-Free Use

The 10 mm diameter knurled head provides enough grip surface to tighten and loosen by hand without a screwdriver, even in tight spaces.

📐 Wide Size Range

Available in M3 and M6 thread diameters with shaft lengths from 5 mm to 50 mm, covering the most common PC case and electronics enclosure fastener sizes.

🎨 10 Anodized Color Options

Choose from Claret, Pink, Golden, Navy Blue, Blue, Black, Silver, Green, Purple, and Orange to match your build aesthetic or color-code fastener locations.

📦 Flexible Pack Quantities

Available in 2-piece or 5-piece packs so you can order exactly what your project requires without excess inventory.

🔄 Reusable & Repeatable

Aluminum alloy threads hold up to repeated installation and removal cycles, making these suitable for panels and covers that are accessed regularly.

📐 Technical Specifications — Knurled Thumb Screws

Material	Aluminum alloy
Thread Diameter	M3 / M6
Shaft Length Range	5 mm – 50 mm (approx. 0.20 in – 1.97 in)
Head Diameter	10 mm
Head Thickness	5 mm or 6 mm (see variant options)
Head Style	Knurled round head
Drive Style	Hand-tighten (no tool required)
Finish	Anodized (see variant options for color)
Pack Quantity	2 pcs or 5 pcs (see variant options)
Thread Pitch	See variant options
Weight per Pack	See variant options

❓ Frequently Asked Questions

How do I choose the right shaft length for my PC case?

Measure the depth of the threaded standoff or hole in your case panel. The shaft length should be equal to or slightly shorter than the threaded depth to avoid bottoming out. For most standard ATX and mATX side panels, lengths between 5 mm and 10 mm are typical. If your panel has a thicker lip or uses a captured nut, a longer shaft (12 mm–20 mm) may be needed.

Are these strong enough to hold a PC side panel securely?

Yes, for panel-fastening applications these aluminum alloy thumb screws provide adequate clamping force when hand-tightened. They are not intended for high-torque or load-bearing structural joints. For PC case covers, electronics enclosures, and 3D printer panels, hand-tightening is sufficient and is the intended use case.

Will the anodized finish chip or wear off with repeated use?

Anodized aluminum finishes are integrated into the surface of the metal rather than applied as a coating, so they resist chipping better than paint. With normal hand-tightening use, the color finish holds up well over repeated installation and removal cycles. Avoid using tools to overtighten, as this can damage both the finish and the threads.

What is the difference between the M3 and M6 thread options?

M3 refers to a 3 mm nominal thread diameter and is the standard for most PC case standoffs, motherboard mounting points, and small electronics enclosures. M6 refers to a 6 mm nominal thread diameter and is used in heavier enclosures, aluminum extrusion frames (such as those used in 3D printers), and some industrial panel applications. Check the thread size of your existing holes before ordering.

Can I use these on aluminum extrusion frames for 3D printers?

Yes. M3 thumb screws are commonly used with T-nut inserts in 2020 and 2040 aluminum extrusion profiles. Select the appropriate shaft length based on your T-nut depth and panel thickness. M6 variants are suitable for larger extrusion profiles that use M6 T-nuts.

Should I choose the 2-piece or 5-piece pack?

Most standard PC cases use 2–4 thumb screws per side panel, so a 2-piece pack covers a single panel replacement. If you are building a new system, color-coding multiple panels, or stocking spares for a workshop, the 5-piece pack offers a lower per-unit cost and ensures you have extras on hand. The pack quantity is shown in the "Head Dia × Thick & Qty" variant selector.

Are these compatible with standard PC case threaded holes without modification?

These thumb screws are designed to thread directly into standard M3 or M6 threaded holes and standoffs without modification. If your case uses push-in or snap-fit panel retention, these screws are not compatible. Confirm your case uses threaded fastener holes before purchasing.

🛒 Select your colour, thread size, and quantity above, then add to cart.

M3 M6 Knurled Thumb Screws Aluminum Alloy PC Case Cover Hand Tighten Bolts 3/6mm

Payment & Security

Let customers speak for us

DIY Expert Support

Beschreibung

M3 M6 Knurled Thumb Screws — Tool-Free Fastening for PC Builds & DIY Projects

✅ Key Features of These Knurled Thumb Screws

📐 Technical Specifications — Knurled Thumb Screws

❓ Frequently Asked Questions

M3 M6 Knurled Thumb Screws Aluminum Alloy PC Case Cover Hand Tighten Bolts 3/6mm

You may also like

Recently viewed