Magnetic Slot Phillips Hex Torx Screwdriver Wrench Right Angle Tight Space Bent

The All Size (10pcs) set covers the most common drive types: Cross Slot, Phillips PH1 and PH2, Hex H2.5, H3, H4, and H5, plus Torx T10, T15, T20, T25, T27, and T30. Individual bits are also sold separately if you only need a specific profile.

【Z】 refers to the straight (Z-type) right angle configuration, while 【L】 refers to the L-shaped bent configuration. Both achieve a 90° drive angle but differ slightly in handle geometry and the clearance direction they work best in. Check the variant images to confirm which suits your application.

These bits use a standard 1/4 in. hex shank, which is compatible with the vast majority of right angle bit adapters, magnetic bit holders, and power tool quick-release chucks. If your adapter accepts standard 1/4 in. hex bits, these will fit.

The magnetic tip is designed to hold small fasteners securely during placement — strong enough to prevent drops but not so powerful as to cause issues in typical repair scenarios. Exercise caution when working directly adjacent to magnetic-sensitive components such as hard disk drives or certain sensors.

These are designed primarily for hand-torque applications via the right angle wrench handle. While the 1/4 in. hex shank is physically compatible with power tool chucks, using them with high-torque impact drivers is not recommended as it may shorten bit life or cause cam-out on the fastener.

The drive tips are manufactured from hardened tool steel, which provides resistance to cam-out and maintains the drive geometry across repeated use. For best longevity, apply steady axial pressure when driving and select the correct bit size for the fastener head to avoid rounding.

These bits are standard Torx (T-profile), not Torx Plus or Torx Security (with the center pin). They will not fit Torx Security fasteners that have a post in the center of the recess. For standard Torx fasteners (T10–T30), they are fully compatible.