Mini Slide Switch Mounting Bracket for RC Car Robot DIY Electronics

Count the number of switches in your build and add 10–20% extra as spares. For a single RC car or robot, 10 pcs is typically sufficient. Larger batch builds or classroom kits generally benefit from the 50 or 100 pcs options, which also offer a lower per-unit cost.

These brackets are designed for mini slide switches and micro toggle switches with a body width typically in the 6–8 mm range. Always verify your switch's body dimensions against the bracket's slot opening before ordering. If you are unsure, contact us to confirm compatibility.

These brackets are generally suited for indoor and sheltered use. For outdoor RC applications exposed to rain or moisture, consider applying a conformal coating to the switch assembly. The bracket material is not rated for prolonged submersion or continuous outdoor exposure.

The three colors are functionally identical. Color coding is useful for circuit identification in multi-switch panels — for example, using one color per circuit or per robot subsystem to make wiring easier to trace and troubleshoot.

In most cases, the bracket holds the switch body and is secured to the panel via the switch's own threaded bushing and nut. No additional fasteners are generally required for standard panel thicknesses. For thicker panels, a small spacer may be needed — contact us to confirm.

Yes — the bracket is designed to accommodate both mini slide switches and micro toggle switches of comparable body size. Confirm your switch's footprint matches the bracket slot before purchasing if you are using a less common switch form factor.

These brackets are designed for lightweight electronics mounting, not structural load-bearing. They are suitable for securing low-mass switches (typically under 5 g) in vibration-prone environments like RC cars and hobby robots. They are not intended for industrial or high-vibration machinery applications.