Nylon Pneumatic Tee 3-Way Push Fit Connector — 4mm to 16mm Inline Hose Fitting

Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild

Nylon Pneumatic Tee 3-Way Push Fit Connector — 4mm to 16mm Inline Hose Fitting

HomeDIYer

Keine Bewertungen

By HomeDIYer®

Sizes: 4mm

Packing QTY (Piece): 2 PCS

Preis:

$2.67 USD

Lagerbestand:

Verfügbar (500 Stück), versandbereit

Menge:

Teile dieses Produkt

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

Nylon Pneumatic Tee 3-Way Push Fit Connector — Split Your Air Line or Fluid Hose in Seconds

Running a single air line to multiple tools — or trying to branch a drip irrigation system without leaks — means you need a connector that holds firm under pressure without fussing with threads or clamps. These nylon tee push fit connectors let hobbyists, workshop owners, and irrigation installers split any pneumatic or fluid hose line cleanly and quickly, with no tools required.

Each piece is a 3-way inline tee fitting machined from glass-fiber-reinforced nylon, featuring a push-to-connect collet mechanism on all three ports. Available in seven sizes — 4mm (≈5/32"), 6mm (≈1/4"), 8mm (≈5/16"), 10mm (≈3/8"), 12mm (≈1/2"), 14mm (≈9/16"), and 16mm (≈5/8") — to match your hose outer diameter. Order in packs of 2, 5, 10, or 20 pieces depending on your project scale.

Typical use cases include splitting workshop pneumatic air lines for dual-tool setups, branching drip irrigation tubing in garden beds, routing aquarium CO₂ or airline tubing to multiple tanks, and building compact fluid distribution manifolds in DIY automation or 3D printer enclosures.

🔵 Compatibility: Fits standard metric OD pneumatic tubing and nylon/polyurethane air hose in sizes 4mm–16mm. Verify your hose outer diameter before ordering — these are OD-based push fit fittings, not thread-based.

✅ Key Features of These Nylon Tee Push Fit Connectors

🔗Tool-Free Push-to-Connect — Insert your hose end and it locks instantly; press the collet ring to release. No wrenches, thread tape, or clamps needed for pneumatic hose tee connections.
💧Leak-Resistant Collet Seal — Internal stainless-steel collet grips the hose OD while an elastomeric O-ring seals the port, keeping air or fluid lines tight under typical working pressures.
⚖️Lightweight Nylon Construction — Glass-fiber-reinforced nylon body resists moisture, mild chemicals, and corrosion — a practical alternative to brass fittings in weight-sensitive or corrosion-prone setups.
📐Seven Sizes, One Consistent Design — From 4mm to 16mm OD, all sizes share the same push-fit mechanism, so you can standardize your inline hose tee fittings across multiple hose diameters in one project.
📦Flexible Pack Quantities — Available in 2, 5, 10, or 20-piece packs so you can grab just what you need for a quick repair or stock up for a larger irrigation or pneumatic distribution build.
🏭Broad Application Range — Suited for pneumatic air line splitters, drip irrigation branching, aquarium tubing, and light fluid transfer — anywhere a 3-way inline tee fitting is needed without permanent installation.

📐 Technical Specifications — Nylon Tee Push Fit Hose Connector

Product Type	3-Way Tee Inline Push Fit Connector
Body Material	Glass-fiber-reinforced nylon (PA)
Seal / O-Ring	Elastomeric O-ring (NBR or equivalent)
Collet Material	Stainless steel (typically)
Compatible Hose OD	4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm (select variant)
Hose OD (inch approx.)	5/32", 1/4", 5/16", 3/8", 1/2", 9/16", 5/8"
Number of Ports	3 (T-configuration)
Working Pressure	Typically up to 150 PSI (≈10 bar) at room temperature — confirm for your application
Working Temperature	See variant options / Contact us to confirm
Connection Type	Push-to-connect (collet grip, tool-free)
Thread	None — push fit only
Pack Quantities	2 PCS, 5 PCS, 10 PCS, 20 PCS
Color / Finish	See variant options
Certifications	Contact us to confirm

⚠️ Size Note: These connectors are sized by hose outer diameter. Measure your tube OD with calipers before selecting a size. A 6mm connector fits a hose with a 6mm OD — not a 6mm ID.

❓ Frequently Asked Questions

How do I choose the right size push fit connector for my hose?

Match the connector size to your hose outer diameter (OD). Measure the outside of your tube with calipers. Available sizes and their approximate inch equivalents: 4mm (≈5/32"), 6mm (≈1/4"), 8mm (≈5/16"), 10mm (≈3/8"), 12mm (≈1/2"), 14mm (≈9/16"), 16mm (≈5/8"). Do not order by hose ID — push fit connectors grip the outside of the tube.

What is the maximum working pressure for these tee connectors?

Nylon push fit connectors of this type generally support working pressures up to approximately 150 PSI (≈10 bar) at room temperature. Actual ratings may vary by size. If your application requires precise pressure certification, please contact us to confirm before ordering.

Can these connectors be used outdoors or in wet environments?

Nylon is generally resistant to moisture and mild chemicals, making these fittings suitable for outdoor and damp environments in most cases. Prolonged direct UV exposure may degrade nylon over time. For long-term outdoor installations, consider shielding the fittings from direct sunlight or contact us to confirm suitability for your specific conditions.

Are these fittings compatible with both metric and imperial hoses?

These connectors are sized by metric outer diameter (4mm–16mm). They are typically compatible with metric pneumatic tubing and many standard polyurethane or nylon air hoses. For imperial hose, verify that the OD of your tube matches one of the listed metric sizes before ordering — a 1/4" OD hose (≈6.35mm) is close to but not identical to 6mm.

How do I install and remove a push fit connector?

To install: Cut your hose end cleanly and squarely (a clean cut is critical for a good seal), then push it firmly into the connector port until it seats fully. To remove: Press the collet ring inward toward the body while simultaneously pulling the hose out. No tools or thread tape are required.

What applications are these tee connectors best suited for?

These 3-way inline tee fittings are well suited for: splitting pneumatic air lines in workshops, branching drip irrigation tubing in garden beds, routing aquarium CO₂ or airline tubing to multiple tanks, and building compact fluid distribution setups in DIY automation or 3D printer enclosures. They are not recommended for high-temperature steam lines or aggressive chemical media.

Can I reuse these connectors after removing them?

In most cases, push fit connectors can be reused a limited number of times if the hose end is re-cut cleanly and squarely before reinsertion. Repeated removal and reinsertion may gradually reduce the collet's grip strength. For critical pressure applications, replacing the connector after removal is generally recommended.

🛒 Select your size and quantity above, then add to cart — ships from our US warehouse.

Nylon Pneumatic Tee 3-Way Push Fit Connector — 4mm to 16mm Inline Hose Fitting

Payment & Security

Let customers speak for us

DIY Expert Support

Beschreibung

Nylon Pneumatic Tee 3-Way Push Fit Connector — Split Your Air Line or Fluid Hose in Seconds

✅ Key Features of These Nylon Tee Push Fit Connectors

📐 Technical Specifications — Nylon Tee Push Fit Hose Connector

❓ Frequently Asked Questions

Nylon Pneumatic Tee 3-Way Push Fit Connector — 4mm to 16mm Inline Hose Fitting

You may also like

Recently viewed