Plastic Barbed Hose Connector Fitting – Male & Female Thread

Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild

Plastic Barbed Hose Connector Fitting – Male & Female Thread

HomeDIYer

Keine Bewertungen

By HomeDIYer®

Types: External Thread

Size Required: 1&8"-2.8mm

Qty(pcs): 1

Preis:

$1.75 USD

Lagerbestand:

Verfügbar (500 Stück), versandbereit

Menge:

Teile dieses Produkt

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

Plastic Barbed Hose Connector Fittings — Reliable Thread-to-Hose Connections for DIY & Industrial Use

Whether you're building an irrigation system, routing air lines in a workshop, or repairing a fluid transfer setup, finding a fitting that seals reliably without leaking is half the battle. These plastic barbed hose connector fittings are designed for hobbyists, DIYers, plumbers, and small-shop operators who need a dependable thread-to-hose connection without the cost of metal fittings.

Each fitting is made from durable engineering-grade plastic and features a barbed end for secure hose attachment and a threaded end for connection to ports or pipes. Available in two thread configurations — External Thread (Male) and Internal Thread (Female) — and offered in a wide range of sizes: imperial thread sizes from 1/8" (≈3.2mm) to 3/4" (≈19mm) and metric sizes from M6 to M14, with barb lengths ranging from 2.8mm (≈0.11") to 25mm (≈0.98"). Order in quantities of 1, 3, 5, or 10 pieces per variant.

Typical use cases include garden drip irrigation and soaker hose systems, aquarium and hydroponic water routing, low-pressure pneumatic tubing connections, and general fluid transfer lines in workshops or light manufacturing environments — all scenarios where a plastic barbed hose fitting with threaded connection delivers a clean, leak-resistant result.

🔗 Compatibility Note: Imperial thread sizes (1/8"–3/4") are generally NPT-compatible. Metric sizes (M6–M14) follow standard metric thread profiles. Always verify your port thread type before ordering. Use PTFE tape for a leak-free seal.

✅ Key Features of These Plastic Barbed Hose Connector Fittings

🔩Dual Thread Options — Available in external thread (male) and internal thread (female) configurations to match your existing port or pipe connection without adapters.
📐Wide Size Range — Covers imperial sizes from 1/8" to 3/4" and metric sizes M6 through M14, making these plastic barbed pipe fittings compatible with a broad range of hose and tubing diameters.
💧Barbed Grip Design — The ribbed barb profile grips the inner wall of flexible hose tubing, reducing the risk of pull-out and helping maintain a leak-resistant seal even under moderate flow pressure.
⚖️Lightweight Engineering Plastic — Corrosion-free by nature, these fittings won't rust or oxidize in wet environments, making them well-suited for irrigation, aquarium, and fluid transfer applications.
🔢Flexible Quantity Options — Order 1, 3, 5, or 10 pieces per variant so you can buy exactly what your project needs — whether it's a single repair or a multi-line installation.
🛠️Tool-Free Hose Connection — The barbed end slides directly into compatible flexible hose tubing; secure with a hose clamp for added retention in higher-flow or vibration-prone setups.

📐 Technical Specifications — Plastic Barbed Hose Connector Fittings

Material	Engineering-grade plastic (corrosion-resistant)
Thread Types Available	External Thread (Male) / Internal Thread (Female)
Imperial Thread Sizes	1/8", 1/4", 3/8", 1/2", 3/4"
Metric Thread Sizes	M6, M8, M10, M12, M14
Barb Length Range	2.8mm (≈0.11") – 25mm (≈0.98")
Thread Standard (Imperial)	Typically NPT-compatible — contact us to confirm BSP
Thread Standard (Metric)	Standard metric thread profile
Recommended Application	Low-to-medium pressure air, water, and fluid lines
Typical Working Pressure	See variant options — contact us to confirm for specific use
Quantity per Order	1, 3, 5, or 10 pieces (select above)
Color / Finish	See variant options
Country of Origin	See variant options

⚠️ Sizing Tip: The barb diameter should match your hose's inner diameter (ID). If you're unsure, measure the ID of your hose before selecting a size. Thread size must match your port — imperial and metric threads are not interchangeable.

❓ Frequently Asked Questions

How do I choose the right barb size and thread size for my hose?

Match the barb diameter to your hose's inner diameter (ID). For example, a 1/4" barb generally fits hose with a 1/4" ID. Thread size should match your fitting port — check your existing fittings or use a thread gauge. Imperial sizes like 1/8" and metric sizes like M6 are not interchangeable. When in doubt, measure both the hose ID and the port thread before ordering.

What pressure can these plastic barbed fittings handle?

Plastic barbed fittings are generally suitable for low-to-medium pressure applications. Typical working pressure is typically up to 60–100 PSI depending on the material, hose type, and operating temperature. For high-pressure systems, contact us to confirm suitability before ordering.

Are these fittings suitable for outdoor or chemical-exposed environments?

These plastic fittings are generally resistant to moisture and mild chemicals, making them well-suited for irrigation and aquarium use. However, prolonged UV exposure or contact with strong solvents may degrade the material over time. For harsh outdoor or chemical environments, we recommend considering stainless steel alternatives.

Are the thread sizes NPT, BSP, or metric?

Imperial sizes (1/8" through 3/4") are typically NPT-compatible. Metric sizes (M6 through M14) follow standard metric thread profiles. If you need BSP compatibility, please contact us to confirm before ordering, as NPT and BSP threads have different thread angles and are not directly interchangeable.

What is the difference between Male Thread and Female Thread variants?

Male thread (external thread) fittings have threads on the outside and screw into a female-threaded port on your pump, valve, or manifold. Female thread (internal thread) fittings have threads on the inside and accept a male-threaded pipe or nipple. Select the type that matches your existing connection point.

Do I need thread tape or sealant with these fittings?

For a leak-free seal on the threaded connection, applying PTFE thread tape (plumber's tape) is generally recommended, especially for water or air lines. Wrap the tape clockwise around the male threads before assembly. The barb end typically seals with the hose itself; adding a hose clamp provides extra security in higher-flow or vibration-prone applications.

Can I use these fittings for both air and water lines?

Yes, plastic barbed hose fittings are commonly used for both air and water applications in low-to-medium pressure systems. Typical uses include garden drip irrigation, aquarium water routing, pneumatic tubing, and general fluid transfer lines. Always verify the working pressure of your system against the fitting's rated capacity.

🛒 Select your type, size, and quantity above, then add to cart — ships from our US warehouse.

Plastic Barbed Hose Connector Fitting – Male & Female Thread

Payment & Security

Let customers speak for us

DIY Expert Support

Beschreibung

Plastic Barbed Hose Connector Fittings — Reliable Thread-to-Hose Connections for DIY & Industrial Use

✅ Key Features of These Plastic Barbed Hose Connector Fittings

📐 Technical Specifications — Plastic Barbed Hose Connector Fittings

❓ Frequently Asked Questions

Plastic Barbed Hose Connector Fitting – Male & Female Thread

You may also like

Recently viewed