PVC 45° Ellbogen Winkel Klebe Fittings Rohr Muffe Rohrverbinder Weiß 20mm~200mm

Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild

PVC 45° Ellbogen Winkel Klebe Fittings Rohr Muffe Rohrverbinder Weiß 20mm~200mm

HomeDIYer

Keine Bewertungen

By HomeDIYer®

Größe(Innendurchmesser): 20mm

Menge(Stück): 1 Stk

Preis:

$2.28 USD

Lagerbestand:

Verfügbar (500 Stück), versandbereit

Menge:

Teile dieses Produkt

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

PVC 45° Elbow Slip Fittings — Reliable Direction Changes for Pipe Systems

When a drainage run, irrigation line, or conduit layout needs a clean 45-degree direction change, a poorly matched fitting causes leaks, stress cracks, and costly rework. Plumbers, landscapers, and DIY builders working with rigid PVC pipe systems need a slip fitting that bonds securely, holds pressure, and resists the moisture and chemicals present in real-world installations.

These PVC 45° elbow slip fittings are solvent-weld (Klebefittings) connectors made from rigid white PVC. Each fitting accepts standard metric pipe with inner diameters ranging from 20 mm (approx. ¾ in) up to 200 mm (approx. 7⅞ in), covering the full spectrum from small irrigation laterals to large-bore drainage mains. Wall thickness scales with pipe size to maintain structural integrity across the range.

Typical applications include residential and commercial drainage systems requiring a 45° offset, garden and agricultural drip or sprinkler irrigation networks, underground conduit runs for electrical or data cabling, and pool or pond plumbing where a gradual directional change reduces flow turbulence compared to a 90° elbow.

🔗 Compatible with standard metric PVC pressure and drainage pipe — sizes 20 mm through 200 mm. Designed for solvent-cement (PVC glue) installation. Not suitable for push-fit or threaded connections.

✅ Key Features of These PVC 45° Elbow Slip Fittings

📐True 45° Angle — Provides a precise half-angle deflection for gradual directional changes that reduce flow resistance compared to 90° elbows, suitable for both gravity drainage and pressurised lines.
🎨White PVC Construction — Rigid white PVC resists corrosion, scale build-up, and common household chemicals. The smooth bore interior minimises friction loss and discourages sediment accumulation.
📏Wide Size Range: 20–200 mm — A single product family covers inner diameters from 20 mm (¾ in) to 200 mm (7⅞ in), so you can source matching fittings for every branch of the same system without switching suppliers.
🔧Solvent-Weld Socket (Slip) Design — The plain socket end accepts standard metric PVC pipe for a solvent-cement bond. Once cured, the joint is monolithic — no gaskets, no clamps, no leak paths.
💧Suitable for Drainage, Irrigation & Conduit — Rated for non-pressure drainage and low-pressure irrigation applications. Also widely used as conduit fittings for underground cable protection where a 45° entry or exit angle is required.
📦Flexible Quantity Options — Available in packs of 1, 3, 5, or 10 pieces per size, letting you order exactly what the job requires — from a single repair fitting to a full project supply.

📐 Technical Specifications — PVC 45° Elbow Slip Fittings

Material	Rigid PVC (Polyvinyl Chloride)
Color / Finish	White
Fitting Type	45° Elbow, Slip (Solvent-Weld Socket)
Connection Method	Solvent cement (PVC glue) — plain socket both ends
Inner Diameter Range	20 mm – 200 mm (approx. ¾ in – 7⅞ in)
Available Sizes	20 / 25 / 32 / 40 / 50 / 63 / 75 / 90 / 110 / 125 / 160 / 200 mm
Wall Thickness	See variant options
Deflection Angle	45°
Application	Drainage, irrigation, conduit, pool & pond plumbing
Operating Pressure	See variant options
Quantity per Pack	1 / 3 / 5 / 10 pieces (select above)

❓ Frequently Asked Questions

How do I choose the correct size for my pipe?

Match the fitting's inner diameter (ID) to the outer diameter (OD) of your PVC pipe. Standard metric PVC pipe is sized by its outer diameter, which equals the fitting's nominal inner diameter. For example, a 32 mm fitting accepts 32 mm OD pipe. If you are unsure, measure the pipe OD with calipers and select the matching size from the variant options above.

Can I use these fittings for pressurised water supply lines?

These fittings are designed primarily for gravity drainage and low-pressure irrigation applications. For pressurised cold-water supply lines, verify that the fitting's pressure rating meets your system's working pressure. Contact us to confirm suitability for high-pressure applications before ordering.

What type of adhesive should I use to bond these fittings?

Use a standard PVC solvent cement (PVC glue) appropriate for the pipe diameter. For larger sizes (63 mm and above), apply a PVC primer first to soften the surfaces before cementing. Follow the adhesive manufacturer's cure time instructions — typically 15–30 minutes for handling strength and 24 hours for full pressure service.

Are these fittings resistant to corrosion and chemicals?

Yes. Rigid PVC is inherently resistant to corrosion, rust, and a wide range of dilute acids, alkalis, and salts commonly found in drainage and irrigation water. It does not support biological growth on its smooth inner surface. However, PVC is not suitable for contact with concentrated solvents, aromatic hydrocarbons, or very high-temperature fluids above approximately 60 °C (140 °F).

Why choose a 45° elbow instead of a 90° elbow?

A 45° elbow creates a more gradual directional change, which reduces turbulence and flow resistance in drainage and irrigation lines. Two 45° elbows can replace a single 90° elbow while providing a smoother sweep, which is especially beneficial in gravity-drain systems where maintaining flow velocity matters. Use 45° elbows wherever the layout allows the extra run length.

Can these fittings be used underground or in buried conduit runs?

Yes. Solvent-welded PVC joints are widely used in buried drainage and conduit applications. Ensure the trench backfill is free of sharp stones that could stress the pipe wall, and compact the bedding material evenly around the fitting. For electrical conduit use, confirm that the pipe and fitting combination meets the conduit rating required by your local electrical code.

Do you offer sizes larger than 200 mm or smaller than 20 mm?

The current range covers 20 mm through 200 mm inner diameter. If you require sizes outside this range, please contact us — we may be able to source specific sizes for larger project orders.

🛒 Select your size and quantity above, then add to cart.

PVC 45° Ellbogen Winkel Klebe Fittings Rohr Muffe Rohrverbinder Weiß 20mm~200mm

Payment & Security

Let customers speak for us

DIY Expert Support

Beschreibung

PVC 45° Elbow Slip Fittings — Reliable Direction Changes for Pipe Systems

✅ Key Features of These PVC 45° Elbow Slip Fittings

📐 Technical Specifications — PVC 45° Elbow Slip Fittings

❓ Frequently Asked Questions

PVC 45° Ellbogen Winkel Klebe Fittings Rohr Muffe Rohrverbinder Weiß 20mm~200mm

You may also like

Recently viewed