20mm to 200mm PVC Plastic Pipe Fittings Adhesive Tee T Connector White Blue Gray

Measure the outer diameter (OD) of your existing pipe in millimeters and select the matching connector size. PVC socket fittings are sized by the pipe OD they accept, so a 25mm connector fits a 25mm OD pipe. If you are unsure, use a caliper or wrap a tape measure around the pipe and divide the circumference by π (3.14) to get the OD.

Yes. These fittings are designed for standard PVC solvent cement (CPVC cement is not recommended). Apply primer to both the pipe end and the socket interior, then apply cement and push the pipe in with a quarter-turn. Hold for 30 seconds and allow the joint to cure per the cement manufacturer's instructions before pressurizing.

These fittings are made from rigid PVC. Suitability for potable water depends on local plumbing codes and whether the specific batch carries NSF/ANSI 61 certification. For confirmed potable-water applications, please contact us to confirm certification status before ordering.

Pressure rating varies by pipe diameter — larger diameters typically have lower pressure ratings. As a general guide, schedule 40 PVC tees in the 20mm–50mm range are typically rated for 150–300 PSI at room temperature, while larger sizes (63mm–200mm) are rated lower. Contact us to confirm the pressure rating for your specific size before use in pressurized systems.

Rigid PVC offers excellent resistance to corrosion, rust, scale, and a wide range of common chemicals including dilute acids, alkalis, and salts. It is not resistant to ketones, esters, or aromatic hydrocarbons. For chemical compatibility questions specific to your application, please reach out before ordering.

Yes — these are well-suited for drip irrigation manifolds, garden watering networks, and sprinkler branch lines. The 3-way equal-tee design allows you to split a main supply line into a branch run cleanly. Select the size that matches your irrigation pipe OD and choose a multi-pack quantity to cover multiple junction points in one order.

Yes. PVC tee connectors are widely used in non-pressure structural applications such as greenhouse frames, garden trellises, display fixtures, and shelving. For structural use, solvent-cement bonding provides a rigid, permanent joint. If you need a removable connection, consider using fittings without cement and relying on friction fit only for light-duty frames.