90° PVC Blau Winkel Klebe Fittings Rohr Muffe Rohrverbinder Innerer Dur:20~160mm

Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild

90° PVC Blau Winkel Klebe Fittings Rohr Muffe Rohrverbinder Innerer Dur:20~160mm

HomeDIYer

Keine Bewertungen

By HomeDIYer®

Größe (Innendurchmesser): 20mm

Produktmaterial: PVC

Menge(Stück): 1 Stk

Preis:

$1.89 USD

Lagerbestand:

Verfügbar (500 Stück), versandbereit

Menge:

Teile dieses Produkt

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

90° PVC Elbow Solvent-Weld Fittings — Reliable Blue Pipe Connectors for Irrigation, Drainage & Plumbing

When a pipe run needs to change direction by exactly 90°, a poorly matched elbow can crack under pressure, leak at the joint, or simply refuse to seat flush — costing time and money on rework. Plumbers, irrigation installers, and DIY builders who need a dependable right-angle connector turn to solvent-weld PVC elbows that bond permanently and hold pressure without mechanical fasteners.

These 90° PVC elbow fittings are manufactured from rigid blue PVC (polyvinyl chloride) with smooth solvent-weld socket ends on both ports. Inner diameter (ID) options span 20 mm (approx. ¾ in) through 160 mm (approx. 6¼ in), covering the most common metric pipe schedules. Wall thickness scales with pipe size to maintain consistent pressure ratings across the range.

Typical applications include residential and commercial cold-water supply lines, garden drip and sprinkler irrigation systems, above-ground and below-ground drainage runs, and pool or pond plumbing where a clean 90° turn is required. The blue colour aids quick visual identification of cold-water circuits in multi-pipe installations.

🔗 Compatibility: Designed for metric blue PVC pressure pipe (PN10/PN16 schedule). Confirm your pipe's outer diameter matches the fitting's inner diameter before ordering. Not suitable for hot-water or solvent-incompatible pipe materials.

✅ Key Features of These 90° PVC Elbow Solvent-Weld Fittings

📐 Precise 90° Turn Geometry

Moulded to a true right angle, these elbows redirect pipe runs cleanly without introducing stress concentrations or flow-restricting kinks.

🔵 Rigid Blue PVC Construction

Made from rigid PVC formulated for cold-water service. The blue pigment provides instant visual identification of cold-water circuits in multi-pipe installations.

🔒 Solvent-Weld Socket Ends

Both ports accept standard PVC solvent cement for a chemically fused, leak-free joint that reaches full bond strength within minutes and does not rely on O-rings or clamps.

📏 Wide Size Range: 20–160 mm ID

Available in eleven inner-diameter sizes from 20 mm (¾ in) to 160 mm (6¼ in), covering residential supply lines, irrigation mains, and larger drainage applications in a single product family.

🛡️ Corrosion-Free & Chemically Resistant

PVC does not rust, scale, or corrode in contact with water, soil, or common fertiliser solutions, making these elbows suitable for buried and exposed outdoor installations.

📦 Flexible Pack Quantities

Order 1, 2, 3, 5, or 10 pieces per size to match your project scope — whether you need a single replacement elbow or a bulk supply for a full irrigation layout.

📐 Technical Specifications — 90° PVC Elbow Solvent-Weld Fittings

Fitting Type	90° Elbow (Right Angle)
Connection Method	Solvent weld (glue socket, both ends)
Material	Rigid PVC (polyvinyl chloride)
Colour	Blue
Inner Diameter (ID)	20 / 25 / 32 / 40 / 50 / 63 / 75 / 90 / 110 / 160 mm
Approximate Imperial Equivalent	¾" / 1" / 1¼" / 1½" / 2" / 2½" / 3" / 3½" / 4" / 6¼"
Pressure Rating	See variant options
Wall Thickness	See variant options
Temperature Range	0 °C to 60 °C (cold-water service)
Compatible Pipe Standard	Metric PVC pressure pipe (PN10 / PN16)
Pack Quantity Options	1 / 2 / 3 / 5 / 10 pieces
Application	Cold-water supply, irrigation, drainage, pool plumbing

❓ Frequently Asked Questions

How do I choose the correct size 90° PVC elbow for my pipe?

Measure the outer diameter (OD) of your existing pipe. The fitting's inner diameter (ID) should match the pipe OD closely for a snug solvent-weld fit. For example, a 20 mm ID elbow is designed for pipe with a 20 mm OD. If you are unsure, contact us to confirm compatibility before ordering.

What pressure can these 90° PVC elbows handle?

Pressure rating varies by pipe size and wall schedule. Smaller diameters (20–50 mm) typically support PN10–PN16 working pressures (10–16 bar) when correctly solvent-welded. Larger sizes (63–160 mm) are generally rated lower. Check the specific variant datasheet or contact us for the rated working pressure of your chosen size.

Are these fittings suitable for hot water or steam lines?

No. These blue PVC elbows are rated for cold-water service up to approximately 60 °C. For hot-water supply lines or steam applications, CPVC or other heat-rated materials are required. Using standard PVC above its rated temperature can cause deformation and joint failure.

What solvent cement should I use to bond these fittings?

Use a PVC-compatible solvent cement (also called PVC glue or solvent weld adhesive) rated for pressure pipe. Apply primer to both the pipe end and fitting socket, then apply cement evenly and push the pipe firmly into the socket with a slight twist. Allow the joint to cure per the cement manufacturer's instructions before pressurising the system.

Can I use these elbows for underground or buried installations?

Yes. Rigid PVC is chemically resistant to soil, groundwater, and common fertilisers, making it well suited for buried irrigation and drainage runs. Ensure the trench is free of sharp stones that could stress the pipe wall, and follow local building codes for burial depth and bedding material.

How do these blue PVC elbows compare to grey or white PVC fittings?

The blue colour is a convention used to identify cold-water pressure pipe circuits, making it easier to distinguish cold supply from drainage (typically grey) or other services in multi-pipe installations. The base PVC material and solvent-weld connection method are the same. Always verify that the fitting's pressure rating and pipe schedule match your system requirements regardless of colour.

How many pieces should I order for a typical irrigation project?

Count the number of 90° direction changes in your pipe layout before ordering. For small garden drip systems, 1–3 elbows per size is often sufficient. For larger irrigation mains or multi-zone layouts, ordering in packs of 5 or 10 reduces per-unit cost and ensures you have spares on hand for adjustments during installation.

🛒 Select your size (inner diameter) and quantity above, then add to cart.

90° PVC Blau Winkel Klebe Fittings Rohr Muffe Rohrverbinder Innerer Dur:20~160mm

Payment & Security

Let customers speak for us

DIY Expert Support

Beschreibung

90° PVC Elbow Solvent-Weld Fittings — Reliable Blue Pipe Connectors for Irrigation, Drainage & Plumbing

✅ Key Features of These 90° PVC Elbow Solvent-Weld Fittings

📐 Technical Specifications — 90° PVC Elbow Solvent-Weld Fittings

❓ Frequently Asked Questions

90° PVC Blau Winkel Klebe Fittings Rohr Muffe Rohrverbinder Innerer Dur:20~160mm

You may also like

Recently viewed